Benchmark #13564 - pibenchmarks.com

Brand: SanDisk Ultra 3D NAND
SSD (2.5" SATA)
#145 / 1,672
106
#562 / 1,672
#543 / 983
#111 / 370
6,633
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-24 08:14:43
#13,564
8,863
+2,230 (+25.16%)
Anonymous

Storage Details
SanDisk Ultra 3D NAND
SSD (2.5" SATA)
500G
SSD
SanDisk
SDSSDH3500G
2.5 inch
SATA
3.00
5,000
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
195 MB/s
297.36 MB/s
279.36 MB/s
11,629 IOPS
22,236 IOPS
46,519 KB/s
88,946 KB/s
30,381 KB/s
31,566 KB/s
21,125 KB/s
33,495 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 228.4 MiB (5.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 103x27 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 480.62 GiB used: 5.78 GiB (1.2%) ID-1: /dev/mmcblk0 model: SD16G size: 14.85 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SDSSDH3500G size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: X61170RL temp: 26 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 25 read: 1 KiB written: 0 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 6.57 GiB size: 6.40 GiB (97.48%) used: 5.73 GiB (89.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: BC50-2AE4 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.60 GiB fs: ext4 label: rootfs uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: BC50-2AE4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.3% command: vncserver-x11-core pid: 3243 mem: 10.7 MiB (0.2%) 2: cpu: 0.9% command: init pid: 1 mem: 8.05 MiB (0.2%) 3: cpu: 0.6% command: bash pid: 3492 mem: 2.39 MiB (0.0%) 4: cpu: 0.3% command: sudo pid: 3483 mem: 2.81 MiB (0.0%) 5: cpu: 0.1% command: dbus-daemon pid: 324 mem: 3.48 MiB (0.0%) Memory top: 5 1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 3364 cpu: 0.1% 2: mem: 10.7 MiB (0.2%) command: vncserver-x11-core pid: 3243 cpu: 2.3% 3: mem: 10.7 MiB (0.2%) command: udisksd pid: 368 cpu: 0.0% 4: mem: 8.05 MiB (0.2%) command: init pid: 1 cpu: 0.9% 5: mem: 7.78 MiB (0.1%) command: systemd-journald pid: 104 cpu: 0.0% Info: Processes: 131 Uptime: 13m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 228.4 MiB (5.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 103x27 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 480.62 GiB used: 5.78 GiB (1.2%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.85 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SDSSDH3500G size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: X61170RL temp: 26 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 25 read: 1 KiB written: 0 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 6.57 GiB size: 6.40 GiB (97.48%) used: 5.73 GiB (89.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: BC50-2AE4 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.60 GiB fs: ext4 label: rootfs 
           uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: BC50-2AE4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.3% command: vncserver-x11-core pid: 3243 mem: 10.7 MiB (0.2%) 
           2: cpu: 0.9% command: init pid: 1 mem: 8.05 MiB (0.2%) 
           3: cpu: 0.6% command: bash pid: 3492 mem: 2.39 MiB (0.0%) 
           4: cpu: 0.3% command: sudo pid: 3483 mem: 2.81 MiB (0.0%) 
           5: cpu: 0.1% command: dbus-daemon pid: 324 mem: 3.48 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 3364 cpu: 0.1% 
           2: mem: 10.7 MiB (0.2%) command: vncserver-x11-core pid: 3243 cpu: 2.3% 
           3: mem: 10.7 MiB (0.2%) command: udisksd pid: 368 cpu: 0.0% 
           4: mem: 8.05 MiB (0.2%) command: init pid: 1 cpu: 0.9% 
           5: mem: 7.78 MiB (0.1%) command: systemd-journald pid: 104 cpu: 0.0% 
Info:      Processes: 131 Uptime: 13m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13564 - Brand: SanDisk Ultra 3D NAND