Benchmark #13595 - pibenchmarks.com

Brand: Kingston SSDNow V300
SSD (2.5" SATA)
#38 / 1,539
284
#552 / 1,539
#532 / 875
#165 / 363
6,003
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-24 13:29:46
#13,595
5,680
-323 (-5.69%)
Anonymous

Storage Details
Kingston SSDNow V300
SSD (2.5" SATA)
SSD
Kingston
SV300S37A240G
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
124 MB/s
4,561 IOPS
4,105 IOPS
18,244 KB/s
16,420 KB/s
25,610 KB/s
21,733 KB/s
17,641 KB/s
26,116 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=1 datadev=UUID=95f6c42d-9cde-4878-a4a2-77fd49d17f03 qmap=pt quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 551.7 MiB (14.2%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 230.99 GiB used: 73.1 MiB (0.0%) ID-1: /dev/mmcblk0 model: SD08G size: 7.42 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Kingston model: SV300S37A240G family: Driven SSDs size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 583ABBF0 temp: 24 C scheme: MBR SMART: yes state: enabled health: PASSED on: 374d 17h cycles: 1140 read: 863 GiB written: 2369 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 7.42 GiB size: 7.41 GiB (99.95%) used: 73.1 MiB (1.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 087F-6D25 ID-2: /snap/core/8594 raw size: 77.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A ID-3: /snap/core/8692 raw size: 77.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A ID-4: /snap/nextcloud/18888 raw size: 189.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-5: /snap/nextcloud/19303 raw size: 193.1 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: ntfs label: N/A uuid: N/A ID-2: /dev/sda2 size: 223.45 GiB fs: ext4 label: berryboot uuid: 95f6c42d-9cde-4878-a4a2-77fd49d17f03 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 5.0% command: lib/systemd/systemd pid: 1 mem: 8.09 MiB (0.2%) 2: cpu: 3.2% command: mysqld pid: 1308 mem: 176.0 MiB (4.7%) 3: cpu: 2.9% command: snapd pid: 432 mem: 17.5 MiB (0.4%) 4: cpu: 1.7% command: systemd-journald pid: 208 mem: 8.35 MiB (0.2%) 5: cpu: 1.6% command: dhcpcd pid: 422 mem: 1.99 MiB (0.0%) Memory top: 5 1: mem: 176.0 MiB (4.7%) command: mysqld pid: 1308 cpu: 3.2% 2: mem: 18.6 MiB (0.4%) command: php-fpm: pid: 1403 cpu: 1.2% 3: mem: 17.5 MiB (0.4%) command: snapd pid: 432 cpu: 2.9% 4: mem: 12.5 MiB (0.3%) command: packagekitd pid: 9462 cpu: 0.9% 5: mem: 9.40 MiB (0.2%) command: udisksd pid: 409 cpu: 0.6% Info: Processes: 163 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=1 
           datadev=UUID=95f6c42d-9cde-4878-a4a2-77fd49d17f03 qmap=pt quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 551.7 MiB (14.2%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 230.99 GiB used: 73.1 MiB (0.0%) 
           ID-1: /dev/mmcblk0 model: SD08G size: 7.42 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Kingston model: SV300S37A240G family: Driven SSDs 
           size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s 
           rev: 583ABBF0 temp: 24 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 374d 17h cycles: 1140 read: 863 GiB 
           written: 2369 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 7.42 GiB size: 7.41 GiB (99.95%) used: 73.1 MiB (1.0%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 087F-6D25 
           ID-2: /snap/core/8594 raw size: 77.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A 
           ID-3: /snap/core/8692 raw size: 77.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A 
           ID-4: /snap/nextcloud/18888 raw size: 189.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-5: /snap/nextcloud/19303 raw size: 193.1 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: ntfs label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 223.45 GiB fs: ext4 label: berryboot 
           uuid: 95f6c42d-9cde-4878-a4a2-77fd49d17f03 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 5.0% command: lib/systemd/systemd pid: 1 mem: 8.09 MiB (0.2%) 
           2: cpu: 3.2% command: mysqld pid: 1308 mem: 176.0 MiB (4.7%) 
           3: cpu: 2.9% command: snapd pid: 432 mem: 17.5 MiB (0.4%) 
           4: cpu: 1.7% command: systemd-journald pid: 208 mem: 8.35 MiB (0.2%) 
           5: cpu: 1.6% command: dhcpcd pid: 422 mem: 1.99 MiB (0.0%) 
           Memory top: 5 
           1: mem: 176.0 MiB (4.7%) command: mysqld pid: 1308 cpu: 3.2% 
           2: mem: 18.6 MiB (0.4%) command: php-fpm: pid: 1403 cpu: 1.2% 
           3: mem: 17.5 MiB (0.4%) command: snapd pid: 432 cpu: 2.9% 
           4: mem: 12.5 MiB (0.3%) command: packagekitd pid: 9462 cpu: 0.9% 
           5: mem: 9.40 MiB (0.2%) command: udisksd pid: 409 cpu: 0.6% 
Info:      Processes: 163 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13595 - Brand: Kingston SSDNow V300