Benchmark #13649 - pibenchmarks.com

Brand: AData SU800
SSD (2.5" SATA)
#130 / 1,675
126
#610 / 1,675
#589 / 984
#140 / 370
6,379
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-25 09:21:52
#13,649
6,226
-153 (-2.46%)
Zecho
Adata SU800 on Pi 4 using Adata EX500 Enclosure USB 3.1

Storage Details
AData SU800
SSD (2.5" SATA)
128G
SSD
AData
SU800
2.5 inch
SATA
3.00
5,000
1d6b:a73a
0x1d6b (Linux Foundation)
0xa73a
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
188 MB/s
163.1 MB/s
162.73 MB/s
5,239 IOPS
5,430 IOPS
20,956 KB/s
21,723 KB/s
29,952 KB/s
25,463 KB/s
19,406 KB/s
22,300 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=125f:a73a:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 204.2 MiB (5.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 226x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 148.21 GiB used: 1.36 GiB (0.9%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.97 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: A-Data model: XPG EX500 size: 119.24 GiB block size: physical: 512 B logical: 512 B rev: 9301 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 117.13 GiB (98.44%) used: 1.31 GiB (1.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 28.71 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: A-DATA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 125f:a73a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.7% command: init pid: 1 mem: 8.08 MiB (0.2%) 2: cpu: 0.5% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: systemd-journald pid: 109 mem: 6.79 MiB (0.1%) 4: cpu: 0.2% command: bash pid: 735 mem: 2.81 MiB (0.0%) 5: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 8.08 MiB (0.2%) command: init pid: 1 cpu: 1.7% 2: mem: 6.79 MiB (0.1%) command: systemd-journald pid: 109 cpu: 0.2% 3: mem: 6.69 MiB (0.1%) command: systemd pid: 541 cpu: 0.0% 4: mem: 6.04 MiB (0.1%) command: sshd: pid: 535 cpu: 0.0% 5: mem: 5.52 MiB (0.1%) command: systemd-logind pid: 352 cpu: 0.0% Info: Processes: 129 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=125f:a73a:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 204.2 MiB (5.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 226x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 148.21 GiB used: 1.36 GiB (0.9%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.97 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: A-Data model: XPG EX500 size: 119.24 GiB block size: 
           physical: 512 B logical: 512 B rev: 9301 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 117.13 GiB (98.44%) used: 1.31 GiB (1.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 28.71 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: A-DATA type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 125f:a73a Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.7% command: init pid: 1 mem: 8.08 MiB (0.2%) 
           2: cpu: 0.5% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.2% command: systemd-journald pid: 109 mem: 6.79 MiB (0.1%) 
           4: cpu: 0.2% command: bash pid: 735 mem: 2.81 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.08 MiB (0.2%) command: init pid: 1 cpu: 1.7% 
           2: mem: 6.79 MiB (0.1%) command: systemd-journald pid: 109 cpu: 0.2% 
           3: mem: 6.69 MiB (0.1%) command: systemd pid: 541 cpu: 0.0% 
           4: mem: 6.04 MiB (0.1%) command: sshd: pid: 535 cpu: 0.0% 
           5: mem: 5.52 MiB (0.1%) command: systemd-logind pid: 352 cpu: 0.0% 
Info:      Processes: 129 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13649 - Brand: AData SU800