Benchmark #13837 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
#16 / 1,701
803
#1,184 / 1,701
#86 / 405
1,576
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-27 02:12:35
#13,837
1,426
-150 (-10.52%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
59.2G
SD
SanDisk
SN64G
SDXC
6.00
0x03
SD
8.0
10/2019
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
37.4 MB/s
39.72 MB/s
36.4 MB/s
1,198 IOPS
3,169 IOPS
4,793 KB/s
12,677 KB/s
9,434 KB/s
2,697 KB/s
7,644 KB/s
3,741 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 572.6 MiB (14.4%) gpu: 260.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x59 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 525.24 GiB used: 155.97 GiB (29.7%) ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 500G drive model: SSD 850 EVO 500GB family: based SSDs size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 3202 drive rev: EMT03B6Q temp: 29 C scheme: GPT SMART: yes state: enabled health: PASSED on: 15d 5h cycles: 748 written: 23.04 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.26 GiB (98.37%) used: 4.42 GiB (7.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/500ssdPV raw size: 465.57 GiB size: 465.57 GiB (100.00%) used: 151.50 GiB (32.5%) fs: exfat block size: 4096 B dev: /dev/sda2 label: 500ssdPV uuid: 5DFA-177B Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.2% command: xtightvnc pid: 645 mem: 13.4 MiB (0.3%) 2: cpu: 1.0% command: lxpanel pid: 727 mem: 30.2 MiB (0.8%) 3: cpu: 0.8% command: lxpanel pid: 829 mem: 28.6 MiB (0.7%) 4: cpu: 0.7% command: [kworker/u8:4-brcmf_wq/mmc1:0001:1] pid: 433 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: [irq/37-mmc1] pid: 70 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 46.1 MiB (1.2%) command: xorg pid: 603 cpu: 0.4% 2: mem: 30.2 MiB (0.8%) command: lxpanel pid: 727 cpu: 1.0% 3: mem: 28.6 MiB (0.7%) command: lxpanel pid: 829 cpu: 0.8% 4: mem: 28.0 MiB (0.7%) command: lxterminal pid: 5145 cpu: 0.0% 5: mem: 24.8 MiB (0.6%) command: pcmanfm pid: 729 cpu: 0.2% Info: Processes: 186 Uptime: 29m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 572.6 MiB (14.4%) gpu: 260.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x59 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 525.24 GiB used: 155.97 GiB (29.7%) 
           ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 500G 
           drive model: SSD 850 EVO 500GB family: based SSDs size: 465.76 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 3202 drive rev: EMT03B6Q temp: 29 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 15d 5h cycles: 748 written: 23.04 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.26 GiB (98.37%) used: 4.42 GiB (7.6%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/500ssdPV raw size: 465.57 GiB size: 465.57 GiB (100.00%) 
           used: 151.50 GiB (32.5%) fs: exfat block size: 4096 B dev: /dev/sda2 label: 500ssdPV 
           uuid: 5DFA-177B 
Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.2% command: xtightvnc pid: 645 mem: 13.4 MiB (0.3%) 
           2: cpu: 1.0% command: lxpanel pid: 727 mem: 30.2 MiB (0.8%) 
           3: cpu: 0.8% command: lxpanel pid: 829 mem: 28.6 MiB (0.7%) 
           4: cpu: 0.7% command: [kworker/u8:4-brcmf_wq/mmc1:0001:1] pid: 433 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.6% command: [irq/37-mmc1] pid: 70 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 46.1 MiB (1.2%) command: xorg pid: 603 cpu: 0.4% 
           2: mem: 30.2 MiB (0.8%) command: lxpanel pid: 727 cpu: 1.0% 
           3: mem: 28.6 MiB (0.7%) command: lxpanel pid: 829 cpu: 0.8% 
           4: mem: 28.0 MiB (0.7%) command: lxterminal pid: 5145 cpu: 0.0% 
           5: mem: 24.8 MiB (0.6%) command: pcmanfm pid: 729 cpu: 0.2% 
Info:      Processes: 186 Uptime: 29m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13837 - Brand: SanDisk SD Extreme A2 (SN64G)