Benchmark #13848 - pibenchmarks.com

Brand: Samsung 860 EVO
SSD (2.5" SATA)
#19 / 1,679
692
#496 / 1,679
#479 / 984
#79 / 370
7,076
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-27 04:09:39
#13,848
2,557
-4,519 (-176.73%)
Anonymous
samsung 1t on pi3 using sabrent sata to usb

Storage Details
Samsung 860 EVO
SSD (2.5" SATA)
1000G
SSD
Samsung
SSD860QVO1TB
2.5 inch
SATA
2.00
480
0424:1561
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x1561
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.6 MB/s
31.82 MB/s
31.4 MB/s
2,552 IOPS
2,855 IOPS
10,211 KB/s
11,420 KB/s
12,316 KB/s
9,150 KB/s
10,852 KB/s
12,219 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f203b0fc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 284.7 MiB (28.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:6 chip ID: 0424:7800 IF: eth0 state: down mac: IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 931.51 GiB used: 3.38 GiB (0.4%) ID-1: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Samsung drive model: SSD 860 QVO 1TB size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: RVQ01B6Q temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 19 hrs cycles: 37 written: 66.56 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 915.64 GiB (98.32%) used: 3.33 GiB (0.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:4 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1561 Device-3: 1-1.3:5 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1997:2433 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 7.7% command: [kworker/2:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%) 2: cpu: 7.2% command: lxterminal pid: 969 mem: 47.6 MiB (5.1%) 3: cpu: 4.7% command: init pid: 1 mem: 7.75 MiB (0.8%) 4: cpu: 3.9% command: lxpanel pid: 736 mem: 28.0 MiB (3.0%) 5: cpu: 2.9% command: pcmanfm pid: 738 mem: 20.7 MiB (2.2%) Memory top: 5 1: mem: 58.6 MiB (6.3%) command: dockerd pid: 419 cpu: 2.6% 2: mem: 51.8 MiB (5.5%) command: xorg pid: 461 cpu: 2.7% 3: mem: 47.6 MiB (5.1%) command: lxterminal pid: 969 cpu: 7.2% 4: mem: 30.4 MiB (3.2%) command: containerd pid: 418 cpu: 0.6% 5: mem: 28.0 MiB (3.0%) command: lxpanel pid: 736 cpu: 3.9% Info: Processes: 147 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=f203b0fc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 284.7 MiB (28.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:6 
           chip ID: 0424:7800 
           IF: eth0 state: down mac:  
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 931.51 GiB used: 3.38 GiB (0.4%) 
           ID-1: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Samsung 
           drive model: SSD 860 QVO 1TB size: 931.51 GiB block size: physical: 512 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: RVQ01B6Q temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 19 hrs cycles: 37 written: 66.56 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 915.64 GiB (98.32%) used: 3.33 GiB (0.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:4 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:1561 Device-3: 1-1.3:5 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1997:2433 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 7.7% command: [kworker/2:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%) 
           2: cpu: 7.2% command: lxterminal pid: 969 mem: 47.6 MiB (5.1%) 
           3: cpu: 4.7% command: init pid: 1 mem: 7.75 MiB (0.8%) 
           4: cpu: 3.9% command: lxpanel pid: 736 mem: 28.0 MiB (3.0%) 
           5: cpu: 2.9% command: pcmanfm pid: 738 mem: 20.7 MiB (2.2%) 
           Memory top: 5 
           1: mem: 58.6 MiB (6.3%) command: dockerd pid: 419 cpu: 2.6% 
           2: mem: 51.8 MiB (5.5%) command: xorg pid: 461 cpu: 2.7% 
           3: mem: 47.6 MiB (5.1%) command: lxterminal pid: 969 cpu: 7.2% 
           4: mem: 30.4 MiB (3.2%) command: containerd pid: 418 cpu: 0.6% 
           5: mem: 28.0 MiB (3.0%) command: lxpanel pid: 736 cpu: 3.9% 
Info:      Processes: 147 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13848 - Brand: Samsung 860 EVO