Benchmark #13908 - pibenchmarks.com

Brand: Steelram FS200 USB pSSD
SSD (Portable)
#366 / 1,679
33
#1,417 / 1,679
#979 / 984
#140 / 144
1,014
	AliExpress

Overview
2020-03-27 12:39:49
#13,908
954
-60 (-6.29%)
Anonymous

Storage Details
Steelram FS200 USB pSSD
SSD (Portable)
58.8G
SSD
Steelram
SteelRamA01
3.00
5,000
1d6b:0a01
0x1d6b (Linux Foundation)
0x0a01 (USB Headset)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
22.6 MB/s
218.68 MB/s
214.18 MB/s
229 IOPS
1,459 IOPS
916 KB/s
5,836 KB/s
27,355 KB/s
1,988 KB/s
6,813 KB/s
817 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x1024M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 260.5 MiB (12.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1024x768~60Hz OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 62.75 GiB used: 4.95 GiB (7.9%) ID-1: /dev/mmcblk0 model: 00000 size: 3.75 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.75 GiB size: 57.79 GiB (98.37%) used: 4.85 GiB (8.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Unmounted: ID-1: /dev/mmcblk0p2 size: 3.49 GiB fs: ext4 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech N48/M-BB48/M-UK96A [FirstMouse Plus] type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c001 Device-2: 1-1.4:4 info: Holtek Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04d9:1603 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 7788:0a01 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.8% command: packagekitd pid: 1943 mem: 12.6 MiB (0.6%) 2: cpu: 0.3% command: bash pid: 1797 mem: 2.71 MiB (0.1%) 3: cpu: 0.1% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: xorg pid: 500 mem: 50.3 MiB (2.5%) 5: cpu: 0.1% command: sudo pid: 1787 mem: 3.12 MiB (0.1%) Memory top: 5 1: mem: 50.3 MiB (2.5%) command: xorg pid: 500 cpu: 0.1% 2: mem: 47.8 MiB (2.4%) command: lxterminal pid: 915 cpu: 0.0% 3: mem: 27.9 MiB (1.4%) command: lxpanel pid: 739 cpu: 0.0% 4: mem: 27.1 MiB (1.3%) command: pcmanfm pid: 741 cpu: 0.0% 5: mem: 15.0 MiB (0.7%) command: openbox pid: 734 cpu: 0.0% Info: Processes: 155 Uptime: 2h 22m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1280x1024M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 260.5 MiB (12.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 1024x768~60Hz 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 62.75 GiB used: 4.95 GiB (7.9%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 3.75 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB 
           block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.75 GiB size: 57.79 GiB (98.37%) used: 4.85 GiB (8.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 6341-C9E5 
Unmounted: ID-1: /dev/mmcblk0p2 size: 3.49 GiB fs: ext4 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech N48/M-BB48/M-UK96A [FirstMouse Plus] type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c001 
           Device-2: 1-1.4:4 info: Holtek Keyboard type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04d9:1603 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 
           speed: 5 Gb/s chip ID: 7788:0a01 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.8% command: packagekitd pid: 1943 mem: 12.6 MiB (0.6%) 
           2: cpu: 0.3% command: bash pid: 1797 mem: 2.71 MiB (0.1%) 
           3: cpu: 0.1% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: xorg pid: 500 mem: 50.3 MiB (2.5%) 
           5: cpu: 0.1% command: sudo pid: 1787 mem: 3.12 MiB (0.1%) 
           Memory top: 5 
           1: mem: 50.3 MiB (2.5%) command: xorg pid: 500 cpu: 0.1% 
           2: mem: 47.8 MiB (2.4%) command: lxterminal pid: 915 cpu: 0.0% 
           3: mem: 27.9 MiB (1.4%) command: lxpanel pid: 739 cpu: 0.0% 
           4: mem: 27.1 MiB (1.3%) command: pcmanfm pid: 741 cpu: 0.0% 
           5: mem: 15.0 MiB (0.7%) command: openbox pid: 734 cpu: 0.0% 
Info:      Processes: 155 Uptime: 2h 22m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13908 - Brand: Steelram FS200 USB pSSD