Benchmark #13920 - pibenchmarks.com

Brand: Crucial BX500 Series
SSD (2.5" SATA)
#6 / 1,700
1,154
#634 / 1,700
#609 / 989
#148 / 370
6,353
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-27 14:05:58
#13,920
3,043
-3,310 (-108.77%)
JaseZA
Crucial BX500 Pi 4 Orico Sata to USB3

Storage Details
Crucial BX500 Series
SSD (2.5" SATA)
240G
SSD
Crucial
CT240BX500SSD1
2.5 inch
SATA
2.10
480
0080:a001
0x0080 (Unknown)
0xa001 (JMS578 based SATA bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.3 MB/s
34.07 MB/s
33.93 MB/s
3,535 IOPS
3,159 IOPS
14,141 KB/s
12,636 KB/s
15,786 KB/s
13,858 KB/s
12,962 KB/s
14,313 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=0080:a001:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus charge: Full status: Discharging Memory: RAM: total: 1.97 GiB used: 504.9 MiB (25.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: down mac: IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth16496c4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth44d75a4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth906e598 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vetha5f70b5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethf079e69 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 253.29 GiB used: 15.05 GiB (5.9%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 size: 223.57 GiB block size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.85 GiB (98.45%) used: 4.99 GiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.96 GiB (98.26%) used: 4.97 GiB (17.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-5: /var/lib/docker/overlay2/38384292fc07a135ce2c5ff333f9211ce00d76ed021d57cc1930d9cdceaac132/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/481dae25bd6380057695bf8e3c8da8874e89b00a8678cb9a7117e58392802ec8/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/5e5968ac99412b6f7c0ddd87a2d0fb172bbd9c2926bef9c71bfa11ca42309105/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/f4c713fae7028a253171b270d72c4e7cc58b8615ad40c1d6a4ab05f42b17d5cd/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/fdb19ec53933a1d67c5e87c4da82e5a452189ed2171d65b1e267bd38c3d6a474/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0080:a001 Device-2: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.6% command: python3 pid: 3173 mem: 69.5 MiB (3.5%) 2: cpu: 1.5% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: [kworker/u8:2-events_unbound] pid: 6166 mem: 0.00 MiB (0.0%) 4: cpu: 0.8% command: packagekitd pid: 6366 mem: 12.8 MiB (0.6%) 5: cpu: 0.6% command: init pid: 1 mem: 8.24 MiB (0.4%) Memory top: 5 1: mem: 69.5 MiB (3.5%) command: python3 pid: 3173 cpu: 1.6% 2: mem: 64.8 MiB (3.3%) command: dockerd pid: 769 cpu: 0.3% 3: mem: 45.5 MiB (2.3%) command: docker pid: 1234 cpu: 0.0% 4: mem: 45.2 MiB (2.3%) command: xorg pid: 551 cpu: 0.2% 5: mem: 33.8 MiB (1.7%) command: python3 pid: 1763 cpu: 0.4% Info: Processes: 196 Uptime: 18m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=0080:a001:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Battery:   Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus 
           charge: Full status: Discharging 
Memory:    RAM: total: 1.97 GiB used: 504.9 MiB (25.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth16496c4 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth44d75a4 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth906e598 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vetha5f70b5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethf079e69 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 253.29 GiB used: 15.05 GiB (5.9%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.85 GiB (98.45%) used: 4.99 GiB (2.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 6341-C9E5 
           ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.96 GiB (98.26%) 
           used: 4.97 GiB (17.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-5: /var/lib/docker/overlay2/38384292fc07a135ce2c5ff333f9211ce00d76ed021d57cc1930d9cdceaac132/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/481dae25bd6380057695bf8e3c8da8874e89b00a8678cb9a7117e58392802ec8/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/5e5968ac99412b6f7c0ddd87a2d0fb172bbd9c2926bef9c71bfa11ca42309105/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/f4c713fae7028a253171b270d72c4e7cc58b8615ad40c1d6a4ab05f42b17d5cd/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/fdb19ec53933a1d67c5e87c4da82e5a452189ed2171d65b1e267bd38c3d6a474/merged raw size: N/A size: 219.85 GiB used: 4.99 GiB (2.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 0080:a001 Device-2: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.6% command: python3 pid: 3173 mem: 69.5 MiB (3.5%) 
           2: cpu: 1.5% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: [kworker/u8:2-events_unbound] pid: 6166 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.8% command: packagekitd pid: 6366 mem: 12.8 MiB (0.6%) 
           5: cpu: 0.6% command: init pid: 1 mem: 8.24 MiB (0.4%) 
           Memory top: 5 
           1: mem: 69.5 MiB (3.5%) command: python3 pid: 3173 cpu: 1.6% 
           2: mem: 64.8 MiB (3.3%) command: dockerd pid: 769 cpu: 0.3% 
           3: mem: 45.5 MiB (2.3%) command: docker pid: 1234 cpu: 0.0% 
           4: mem: 45.2 MiB (2.3%) command: xorg pid: 551 cpu: 0.2% 
           5: mem: 33.8 MiB (1.7%) command: python3 pid: 1763 cpu: 0.4% 
Info:      Processes: 196 Uptime: 18m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13920 - Brand: Crucial BX500 Series