Benchmark #13968 - pibenchmarks.com

Brand: OCZ Vertex 4 Series
SSD (2.5" SATA)
#362 / 1,665
28
#663 / 1,665
#642 / 977
#179 / 370
6,056
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se Amazon.sg

Overview
2020-03-28 05:39:25
#13,968
6,410
+354 (+5.52%)
Anonymous
raspi4ssd

Storage Details
OCZ Vertex 4 Series
SSD (2.5" SATA)
128G
SSD
OCZ
VERTEX450
SATA
7825:a2a4
0x7825 (Other World Computing)
0xa2a4 (External SATA Hard Drive Adapter cable PA023U3)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
206 MB/s
236.23 MB/s
240.69 MB/s
6,673 IOPS
3,680 IOPS
26,692 KB/s
14,720 KB/s
29,693 KB/s
25,617 KB/s
13,841 KB/s
23,796 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=7825:a2a4:u console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 Memory: RAM: total: 1000.6 MiB used: 198.5 MiB (19.8%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 117x70 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 3.78 TiB used: 507.51 GiB (13.1%) ID-1: /dev/mmcblk0 model: SD32G size: 29.98 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: OCZ model: VERT EX450 size: 119.24 GiB block size: physical: 512 B logical: 512 B rev: 0409 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb type: USB vendor: Samsung model: HD103SJ family: SpinPoint F3 size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 7200 rpm rev: 0001 temp: 41 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 33d 16h cycles: 3528 ID-4: /dev/sdc type: USB vendor: Western Digital model: WD10 02FAEX-00Z3A0 drive model: WD1002FAEX-00Z3A0 family: Caviar Black size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0001 drive rev: 05.01D05 temp: 47 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 73d 22h cycles: 2076 ID-5: /dev/sdd type: USB vendor: Western Digital model: WD10 02FAEX-00Z3A0 drive model: WD1002FAEX-00Z3A0 family: Caviar Black size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0001 drive rev: 05.01D05 temp: 47 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 74d 16h cycles: 2069 ID-6: /dev/sde type: USB vendor: Samsung model: HD103SJ family: SpinPoint F3 size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 7200 rpm rev: 0001 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 33d 15h cycles: 3528 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.98 GiB size: 117.12 GiB (98.43%) used: 3.79 GiB (3.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/raid raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 503.67 GiB (13.7%) fs: ext4 block size: 4096 B dev: /dev/dm-0 label: N/A uuid: 00b3b250-03cc-4a68-bc21-d98c19e4df73 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.73 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 258.9 MiB fs: vfat label: boot uuid: 5203-DB74 ID-3: /dev/sdb1 size: 931.51 GiB fs: lvm2_member label: N/A uuid: U2lFw0-UuDo-m45Z-xMKc-pOGJ-l3vG-bSxmh5 ID-4: /dev/sdc1 size: 931.51 GiB fs: lvm2_member label: N/A uuid: qSUkIa-J2LQ-RbtZ-SuCF-K4r3-1WPN-AscDZ1 ID-5: /dev/sdd1 size: 931.51 GiB fs: lvm2_member label: N/A uuid: GzSqyE-35WF-wwlp-W1Ej-rO9A-yD66-50c0rf ID-6: /dev/sde1 size: 931.51 GiB fs: lvm2_member label: N/A uuid: b8Dc2H-yDxX-G0IP-ZpAD-TS7n-dOub-JTesRi USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 7825:a2a4 Device-2: 2-2:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0567 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.2% command: plex pid: 820 mem: 30.7 MiB (3.1%) 2: cpu: 2.9% command: plex pid: 925 mem: 28.6 MiB (2.9%) 3: cpu: 2.1% command: init pid: 1 mem: 8.04 MiB (0.8%) 4: cpu: 1.1% command: plex pid: 531 mem: 49.1 MiB (5.0%) 5: cpu: 0.4% command: [usb-storage] pid: 76 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 49.1 MiB (5.0%) command: plex pid: 531 cpu: 1.1% 2: mem: 30.7 MiB (3.1%) command: plex pid: 820 cpu: 4.2% 3: mem: 28.6 MiB (2.9%) command: plex pid: 925 cpu: 2.9% 4: mem: 11.1 MiB (1.1%) command: plex pid: 886 cpu: 0.0% 5: mem: 8.04 MiB (0.8%) command: init pid: 1 cpu: 2.1% Info: Processes: 133 Uptime: 3m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=7825:a2a4:u 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 
           Memory:    RAM: total: 1000.6 MiB used: 198.5 MiB (19.8%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 117x70 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 3.78 TiB used: 507.51 GiB (13.1%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 29.98 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: OCZ model: VERT EX450 size: 119.24 GiB block size: 
           physical: 512 B logical: 512 B rev: 0409 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb type: USB vendor: Samsung model: HD103SJ family: SpinPoint F3 
           size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s 
           rotation: 7200 rpm rev: 0001 temp: 41 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 33d 16h cycles: 3528 
           ID-4: /dev/sdc type: USB vendor: Western Digital model: WD10 02FAEX-00Z3A0 
           drive model: WD1002FAEX-00Z3A0 family: Caviar Black size: 931.51 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0001 drive rev: 05.01D05 temp: 47 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 73d 22h cycles: 2076 
           ID-5: /dev/sdd type: USB vendor: Western Digital model: WD10 02FAEX-00Z3A0 
           drive model: WD1002FAEX-00Z3A0 family: Caviar Black size: 931.51 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0001 drive rev: 05.01D05 temp: 47 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 74d 16h cycles: 2069 
           ID-6: /dev/sde type: USB vendor: Samsung model: HD103SJ family: SpinPoint F3 
           size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s 
           rotation: 7200 rpm rev: 0001 temp: 40 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 33d 15h cycles: 3528 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.98 GiB size: 117.12 GiB (98.43%) used: 3.79 GiB (3.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/raid raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 503.67 GiB (13.7%) 
           fs: ext4 block size: 4096 B dev: /dev/dm-0 label: N/A 
           uuid: 00b3b250-03cc-4a68-bc21-d98c19e4df73 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.73 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 258.9 MiB fs: vfat label: boot uuid: 5203-DB74 
           ID-3: /dev/sdb1 size: 931.51 GiB fs: lvm2_member label: N/A 
           uuid: U2lFw0-UuDo-m45Z-xMKc-pOGJ-l3vG-bSxmh5 
           ID-4: /dev/sdc1 size: 931.51 GiB fs: lvm2_member label: N/A 
           uuid: qSUkIa-J2LQ-RbtZ-SuCF-K4r3-1WPN-AscDZ1 
           ID-5: /dev/sdd1 size: 931.51 GiB fs: lvm2_member label: N/A 
           uuid: GzSqyE-35WF-wwlp-W1Ej-rO9A-yD66-50c0rf 
           ID-6: /dev/sde1 size: 931.51 GiB fs: lvm2_member label: N/A 
           uuid: b8Dc2H-yDxX-G0IP-ZpAD-TS7n-dOub-JTesRi 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 7825:a2a4 Device-2: 2-2:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0567 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.2% command: plex pid: 820 mem: 30.7 MiB (3.1%) 
           2: cpu: 2.9% command: plex pid: 925 mem: 28.6 MiB (2.9%) 
           3: cpu: 2.1% command: init pid: 1 mem: 8.04 MiB (0.8%) 
           4: cpu: 1.1% command: plex pid: 531 mem: 49.1 MiB (5.0%) 
           5: cpu: 0.4% command: [usb-storage] pid: 76 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 49.1 MiB (5.0%) command: plex pid: 531 cpu: 1.1% 
           2: mem: 30.7 MiB (3.1%) command: plex pid: 820 cpu: 4.2% 
           3: mem: 28.6 MiB (2.9%) command: plex pid: 925 cpu: 2.9% 
           4: mem: 11.1 MiB (1.1%) command: plex pid: 886 cpu: 0.0% 
           5: mem: 8.04 MiB (0.8%) command: init pid: 1 cpu: 2.1% 
Info:      Processes: 133 Uptime: 3m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13968 - Brand: OCZ Vertex 4 Series