Benchmark #14151 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#98 / 1,675
169
#675 / 1,675
#653 / 984
#25 / 69
6,082
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-29 07:30:53
#14,151
2,647
-3,435 (-129.77%)
Anonymous

Storage Details
Transcend MSA Series
SSD (mSATA)
16G
SSD
Transcend
TS16GMSA370
SATA
2.00
480
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
19.1 MB/s
28.39 MB/s
27.83 MB/s
3,130 IOPS
2,712 IOPS
12,520 KB/s
10,848 KB/s
15,392 KB/s
14,078 KB/s
12,394 KB/s
12,410 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 263.6 MiB (26.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 132x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: enxb827eb288d9d state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2001:861:4640:9270:4111:821c:b9c:8df4/64 type: mngtmpaddr noprefixroute scope: global IP v6: fe80::e51a:c63a:882:d0a4/64 scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X IP v6: fe80::f720:6064:a5b9:5aa0/64 virtual: stable-privacy scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 176.143.X.X Drives: Local Storage: total: 14.91 GiB used: 1.50 GiB (10.0%) ID-1: /dev/sda type: USB model: USB 3.0 drive model: TS16GMSA370 family: based SSDs size: 14.91 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s drive rev: 0508 drive rev: P1225CH1 temp: 35 C scheme: MBR SMART: yes state: enabled health: PASSED on: 34 hrs cycles: 134 read: 8.78 GiB written: 143.19 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.66 GiB size: 14.40 GiB (98.24%) used: 1.44 GiB (10.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.0% command: [kworker/2:1-events] pid: 23458 mem: 0.00 MiB (0.0%) 2: cpu: 5.6% command: [kworker/2:0-events_freezable] pid: 23948 mem: 0.00 MiB (0.0%) 3: cpu: 1.3% command: [kworker/2:5-events] pid: 24573 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: smartd pid: 24542 mem: 3.10 MiB (0.3%) 5: cpu: 0.1% command: sshd: pid: 24018 mem: 6.20 MiB (0.6%) Memory top: 5 1: mem: 28.8 MiB (3.1%) command: dnscrypt-proxy pid: 3677 cpu: 0.0% 2: mem: 19.7 MiB (2.1%) command: pihole-ftl pid: 11864 cpu: 0.0% 3: mem: 17.0 MiB (1.8%) command: php-cgi pid: 8874 cpu: 0.0% 4: mem: 14.3 MiB (1.5%) command: php-cgi pid: 8859 cpu: 0.0% 5: mem: 13.4 MiB (1.4%) command: unattended-upgrade-shutdown started by: python3 pid: 31856 cpu: 0.0% Info: Processes: 142 Uptime: 2d 22h 08m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 
           console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 
Memory:    RAM: total: 1002.1 MiB used: 263.6 MiB (26.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 132x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 
           IF: enxb827eb288d9d state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2001:861:4640:9270:4111:821c:b9c:8df4/64 type: mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::e51a:c63a:882:d0a4/64 scope: link 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X 
           IP v6: fe80::f720:6064:a5b9:5aa0/64 virtual: stable-privacy scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 176.143.X.X 
Drives:    Local Storage: total: 14.91 GiB used: 1.50 GiB (10.0%) 
           ID-1: /dev/sda type: USB model: USB 3.0 drive model: TS16GMSA370 family: based SSDs size: 14.91 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s drive rev: 0508 
           drive rev: P1225CH1 temp: 35 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 34 hrs cycles: 134 read: 8.78 GiB written: 143.19 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.66 GiB size: 14.40 GiB (98.24%) used: 1.44 GiB (10.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 
           speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.0% command: [kworker/2:1-events] pid: 23458 mem: 0.00 MiB (0.0%) 
           2: cpu: 5.6% command: [kworker/2:0-events_freezable] pid: 23948 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.3% command: [kworker/2:5-events] pid: 24573 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.6% command: smartd pid: 24542 mem: 3.10 MiB (0.3%) 
           5: cpu: 0.1% command: sshd: pid: 24018 mem: 6.20 MiB (0.6%) 
           Memory top: 5 
           1: mem: 28.8 MiB (3.1%) command: dnscrypt-proxy pid: 3677 cpu: 0.0% 
           2: mem: 19.7 MiB (2.1%) command: pihole-ftl pid: 11864 cpu: 0.0% 
           3: mem: 17.0 MiB (1.8%) command: php-cgi pid: 8874 cpu: 0.0% 
           4: mem: 14.3 MiB (1.5%) command: php-cgi pid: 8859 cpu: 0.0% 
           5: mem: 13.4 MiB (1.4%) command: unattended-upgrade-shutdown started by: python3 pid: 31856 cpu: 0.0% 
Info:      Processes: 142 Uptime: 2d 22h 08m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.0.38

Benchmark #14151 - Brand: Transcend MSA Series