Benchmark #14254 - pibenchmarks.com

Brand: SanDisk SD Ultra (SD16G)
C10 V10 U1
#208 / 1,701
86
#1,548 / 1,701
#340 / 405
631
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-30 01:12:24
#14,254
595
-36 (-6.05%)
Anonymous
f

Secure Digital (SD) Card Details
SanDisk SD Ultra (SD16G)
C10 V10 U1
29G
SD
SanDisk
SD16G
SD
5.00
0x00
42
2.0
08/2019
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
550 (+50)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
16.6 MB/s
21.19 MB/s
21.64 MB/s
371 IOPS
1,446 IOPS
1,486 KB/s
5,784 KB/s
5,498 KB/s
1,736 KB/s
4,302 KB/s
927 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.108-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 1006.1 MiB (49.9%) gpu: 320.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 146x47 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.108-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::a961:6541:4b7e:656a/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 113.77.X.X Drives: Local Storage: total: 1.85 TiB used: 1.20 TiB (65.1%) ID-1: /dev/mmcblk0 model: SD16G size: 29.21 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: BUP Slim GD size: 1.82 TiB block size: physical: 4096 B logical: 512 B rev: 0304 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.96 GiB size: 28.45 GiB (98.24%) used: 15.00 GiB (52.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 ID-3: /home/pi/hdd raw size: 1.82 TiB size: 1.79 TiB (98.38%) used: 1.19 TiB (66.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 8c94c38c-da04-46ff-8c7d-e199dd150605 Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://mirrors.ustc.edu.cn/raspbian/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 1: deb [arch=armhf] https://repo.jellyfin.org/debian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://mirrors.ustc.edu.cn/archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/sonarr.list 1: deb http://apt.sonarr.tv/ master main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http://linux.teamviewer.com/deb stable main Active apt repos in: /etc/apt/sources.list.d/zerotier.list 1: deb http://download.zerotier.com/debian/buster buster main Processes: CPU top: 5 1: cpu: 11.6% command: jellyfin pid: 447 mem: 248.9 MiB (14.6%) 2: cpu: 1.7% command: jackett pid: 498 mem: 125.7 MiB (7.4%) 3: cpu: 1.3% command: mono pid: 446 mem: 105.4 MiB (6.2%) 4: cpu: 1.3% command: mono pid: 506 mem: 109.9 MiB (6.4%) 5: cpu: 0.8% command: [kworker/0:1h-mmc_complete] pid: 87 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 248.9 MiB (14.6%) command: jellyfin pid: 447 cpu: 11.6% 2: mem: 125.7 MiB (7.4%) command: jackett pid: 498 cpu: 1.7% 3: mem: 109.9 MiB (6.4%) command: mono pid: 506 cpu: 1.3% 4: mem: 105.4 MiB (6.2%) command: mono pid: 446 cpu: 1.3% 5: mem: 80.0 MiB (4.7%) command: mysqld pid: 581 cpu: 0.2% Info: Processes: 158 Uptime: 31m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:    Host: raspberrypi Kernel: 4.19.108-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d9b3f436-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
Memory:    RAM: total: 1.97 GiB used: 1006.1 MiB (49.9%) gpu: 320.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 146x47 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.108-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::a961:6541:4b7e:656a/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 113.77.X.X 
Drives:    Local Storage: total: 1.85 TiB used: 1.20 TiB (65.1%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 29.21 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: BUP Slim GD size: 1.82 TiB block size: physical: 4096 B 
           logical: 512 B rev: 0304 scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.96 GiB size: 28.45 GiB (98.24%) used: 15.00 GiB (52.7%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
           ID-3: /home/pi/hdd raw size: 1.82 TiB size: 1.79 TiB (98.38%) used: 1.19 TiB (66.4%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: N/A uuid: 8c94c38c-da04-46ff-8c7d-e199dd150605 
Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage driver: uas interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://mirrors.ustc.edu.cn/raspbian/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 
           1: deb [arch=armhf] https://repo.jellyfin.org/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://mirrors.ustc.edu.cn/archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/sonarr.list 
           1: deb http://apt.sonarr.tv/ master main
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http://linux.teamviewer.com/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/zerotier.list 
           1: deb http://download.zerotier.com/debian/buster buster main
Processes: CPU top: 5 
           1: cpu: 11.6% command: jellyfin pid: 447 mem: 248.9 MiB (14.6%) 
           2: cpu: 1.7% command: jackett pid: 498 mem: 125.7 MiB (7.4%) 
           3: cpu: 1.3% command: mono pid: 446 mem: 105.4 MiB (6.2%) 
           4: cpu: 1.3% command: mono pid: 506 mem: 109.9 MiB (6.4%) 
           5: cpu: 0.8% command: [kworker/0:1h-mmc_complete] pid: 87 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 248.9 MiB (14.6%) command: jellyfin pid: 447 cpu: 11.6% 
           2: mem: 125.7 MiB (7.4%) command: jackett pid: 498 cpu: 1.7% 
           3: mem: 109.9 MiB (6.4%) command: mono pid: 506 cpu: 1.3% 
           4: mem: 105.4 MiB (6.2%) command: mono pid: 446 cpu: 1.3% 
           5: mem: 80.0 MiB (4.7%) command: mysqld pid: 581 cpu: 0.2% 
Info:      Processes: 158 Uptime: 31m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.0.38

Benchmark #14254 - Brand: SanDisk SD Ultra (SD16G)