Benchmark #14255 - pibenchmarks.com

Brand: Samsung 860 EVO
SSD (2.5" SATA)
#19 / 1,679
692
#496 / 1,679
#479 / 984
#78 / 370
7,076
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-30 01:33:29
#14,255
9,305
+2,229 (+23.95%)
Samsoung
samsoung

Storage Details
Samsung 860 EVO
SSD (2.5" SATA)
500G
SSD
Samsung
SSD860EVO500GB
2.5 inch
SATA
3.00
5,000
174c:0825
0x174c (ASMedia Technology Inc.)
0x0825 (Webcam C270)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
239 MB/s
302.32 MB/s
278.5 MB/s
13,464 IOPS
22,431 IOPS
53,859 KB/s
89,726 KB/s
28,565 KB/s
31,661 KB/s
21,943 KB/s
31,348 KB/s

inxi Results
System: Host: RASPBIAN-JRoy Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=00b7226a-02 rootfstype=f2fs elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 438.3 MiB (11.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1920x1080~60Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd00:30b7:d4b8:fb62:f21a:c21:aafe:99a4/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::fb2f:ddb5:d018:1f9d/64 scope: link WAN IP: 147.253.X.X Drives: Local Storage: total: 495.48 GiB used: 27.29 GiB (5.5%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 70.00 GiB size: 70.00 GiB (100.00%) used: 9.40 GiB (13.4%) fs: f2fs block size: 4096 B dev: /dev/sda2 label: rootfs uuid: d4ecb04a-dca9-4c57-b5fb-8125720403b0 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/Donnees raw size: 395.51 GiB size: 395.51 GiB (100.00%) used: 11.43 GiB (2.9%) fs: f2fs block size: 4096 B dev: /dev/sda3 label: Donnees uuid: 0c2e296b-c3de-42c8-892f-8551017260a4 ID-4: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-5: /media/pi/rootfs raw size: 29.47 GiB size: 28.95 GiB (98.23%) used: 6.36 GiB (22.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.4.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 Device-2: 1-1.4.2:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0825 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.4% command: xorg pid: 542 mem: 58.2 MiB (1.4%) 2: cpu: 8.2% command: vncserver-x11-core pid: 494 mem: 32.0 MiB (0.8%) 3: cpu: 3.4% command: x-terminal-emulator started by: python3 pid: 2885 mem: 46.8 MiB (1.1%) 4: cpu: 2.8% command: lxpanel pid: 1288 mem: 30.9 MiB (0.7%) 5: cpu: 1.7% command: init pid: 1 mem: 8.14 MiB (0.2%) Memory top: 5 1: mem: 59.6 MiB (1.5%) command: kdeconnect-indicator pid: 1291 cpu: 0.4% 2: mem: 58.2 MiB (1.4%) command: xorg pid: 542 cpu: 12.4% 3: mem: 56.2 MiB (1.4%) command: kdeconnectd pid: 1413 cpu: 0.4% 4: mem: 46.8 MiB (1.1%) command: x-terminal-emulator started by: python3 pid: 2885 cpu: 3.4% 5: mem: 32.0 MiB (0.8%) command: vncserver-x11-core pid: 494 cpu: 8.2% Info: Processes: 185 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: bash (sudo) v: 5.0.3 running in: x-terminal-emul inxi: 3.0.38

inxi Results

System:    Host: RASPBIAN-JRoy Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 
           console=tty1 root=PARTUUID=00b7226a-02 rootfstype=f2fs elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 438.3 MiB (11.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1920x1080~60Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd00:30b7:d4b8:fb62:f21a:c21:aafe:99a4/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::fb2f:ddb5:d018:1f9d/64 scope: link 
           WAN IP: 147.253.X.X 
Drives:    Local Storage: total: 495.48 GiB used: 27.29 GiB (5.5%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 70.00 GiB size: 70.00 GiB (100.00%) used: 9.40 GiB (13.4%) fs: f2fs block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: d4ecb04a-dca9-4c57-b5fb-8125720403b0 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/Donnees raw size: 395.51 GiB size: 395.51 GiB (100.00%) used: 11.43 GiB (2.9%) fs: f2fs 
           block size: 4096 B dev: /dev/sda3 label: Donnees uuid: 0c2e296b-c3de-42c8-892f-8551017260a4 
           ID-4: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-5: /media/pi/rootfs raw size: 29.47 GiB size: 28.95 GiB (98.23%) used: 6.36 GiB (22.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 
           Device-1: 1-1.4.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 
           speed: 1.5 Mb/s chip ID: 04d9:0006 
           Device-2: 1-1.4.2:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 174c:0825 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.4% command: xorg pid: 542 mem: 58.2 MiB (1.4%) 
           2: cpu: 8.2% command: vncserver-x11-core pid: 494 mem: 32.0 MiB (0.8%) 
           3: cpu: 3.4% command: x-terminal-emulator started by: python3 pid: 2885 mem: 46.8 MiB (1.1%) 
           4: cpu: 2.8% command: lxpanel pid: 1288 mem: 30.9 MiB (0.7%) 
           5: cpu: 1.7% command: init pid: 1 mem: 8.14 MiB (0.2%) 
           Memory top: 5 
           1: mem: 59.6 MiB (1.5%) command: kdeconnect-indicator pid: 1291 cpu: 0.4% 
           2: mem: 58.2 MiB (1.4%) command: xorg pid: 542 cpu: 12.4% 
           3: mem: 56.2 MiB (1.4%) command: kdeconnectd pid: 1413 cpu: 0.4% 
           4: mem: 46.8 MiB (1.1%) command: x-terminal-emulator started by: python3 pid: 2885 cpu: 3.4% 
           5: mem: 32.0 MiB (0.8%) command: vncserver-x11-core pid: 494 cpu: 8.2% 
Info:      Processes: 185 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: bash (sudo) v: 5.0.3 running in: x-terminal-emul inxi: 3.0.38

Benchmark #14255 - Brand: Samsung 860 EVO