Benchmark #14261 - pibenchmarks.com

Brand: Transcend SSD200 Series
SSD (2.5" SATA)
#278 / 1,679
56
#734 / 1,679
#708 / 984
#209 / 370
5,793
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-30 03:03:33
#14,261
2,531
-3,262 (-128.88%)
froggy74
Transcend SSD220S 120Gb

Storage Details
Transcend SSD200 Series
SSD (2.5" SATA)
120G
SSD
Transcend
TS120GSSD220S
2.5 inch
SATA
2.10
480
2109:0578
0x2109
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.5 MB/s
30.58 MB/s
30.65 MB/s
3,934 IOPS
3,724 IOPS
15,738 KB/s
14,897 KB/s
12,436 KB/s
9,739 KB/s
10,166 KB/s
10,638 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=9f22fc2b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 277.4 MiB (7.0%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 90x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 171.48 GiB used: 1.78 GiB (1.0%) ID-1: /dev/mmcblk0 model: 00000 size: 59.69 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Transcend drive model: TS120GSSD220S family: based SSDs size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0508 drive rev: R0510A0 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 50 read: 35.59 GiB written: 42.97 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 1.73 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 9fb5126d-f513-4948-ba65-bc9071efc52e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: C11E-EB28 Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 ID-2: /dev/mmcblk0p2 size: 59.43 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Device-2: 1-1.4:4 info: Microsoft Wireless Desktop Receiver 3.1 type: Keyboard,HID driver: microsoft,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00f9 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/mono-xamarin.list 1: deb https: //download.mono-project.com/repo/debian/ raspbianbuster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/sonarr.list 1: deb https: //apt.sonarr.tv/ develop main Processes: CPU top: 5 1: cpu: 13.2% command: mono pid: 878 mem: 85.8 MiB (2.1%) 2: cpu: 1.8% command: xsp4.exe started by: mono pid: 324 mem: 30.2 MiB (0.7%) 3: cpu: 1.7% command: init pid: 1 mem: 7.87 MiB (0.1%) 4: cpu: 0.3% command: mysqld pid: 787 mem: 60.2 MiB (1.5%) 5: cpu: 0.2% command: systemd-journald pid: 103 mem: 7.72 MiB (0.1%) Memory top: 5 1: mem: 85.8 MiB (2.1%) command: mono pid: 878 cpu: 13.2% 2: mem: 60.2 MiB (1.5%) command: mysqld pid: 787 cpu: 0.3% 3: mem: 30.2 MiB (0.7%) command: xsp4.exe started by: mono pid: 324 cpu: 1.8% 4: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 712 cpu: 0.0% 5: mem: 22.6 MiB (0.5%) command: apache2 pid: 859 cpu: 0.0% Info: Processes: 123 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=9f22fc2b-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 277.4 MiB (7.0%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 90x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 171.48 GiB used: 1.78 GiB (1.0%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 59.69 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Transcend 
           drive model: TS120GSSD220S family: based SSDs size: 111.79 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0508 drive rev: R0510A0 temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 50 read: 35.59 GiB 
           written: 42.97 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 1.73 GiB (1.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 9fb5126d-f513-4948-ba65-bc9071efc52e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: C11E-EB28 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
           ID-2: /dev/mmcblk0p2 size: 59.43 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Device-2: 1-1.4:4 info: Microsoft Wireless Desktop Receiver 3.1 type: Keyboard,HID 
           driver: microsoft,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00f9 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/mono-xamarin.list 
           1: deb https: //download.mono-project.com/repo/debian/ raspbianbuster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/sonarr.list 
           1: deb https: //apt.sonarr.tv/ develop main
Processes: CPU top: 5 
           1: cpu: 13.2% command: mono pid: 878 mem: 85.8 MiB (2.1%) 
           2: cpu: 1.8% command: xsp4.exe started by: mono pid: 324 mem: 30.2 MiB (0.7%) 
           3: cpu: 1.7% command: init pid: 1 mem: 7.87 MiB (0.1%) 
           4: cpu: 0.3% command: mysqld pid: 787 mem: 60.2 MiB (1.5%) 
           5: cpu: 0.2% command: systemd-journald pid: 103 mem: 7.72 MiB (0.1%) 
           Memory top: 5 
           1: mem: 85.8 MiB (2.1%) command: mono pid: 878 cpu: 13.2% 
           2: mem: 60.2 MiB (1.5%) command: mysqld pid: 787 cpu: 0.3% 
           3: mem: 30.2 MiB (0.7%) command: xsp4.exe started by: mono pid: 324 cpu: 1.8% 
           4: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 712 cpu: 0.0% 
           5: mem: 22.6 MiB (0.5%) command: apache2 pid: 859 cpu: 0.0% 
Info:      Processes: 123 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14261 - Brand: Transcend SSD200 Series