Benchmark #14282 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,701
935
#437 / 1,701
#421 / 990
#53 / 370
7,565
	Amazon.com AliExpress

Overview
2020-03-30 09:23:58
#14,282
2,542
-5,023 (-197.60%)
Anonymous
desd

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
465.8G
SSD
JMicron
JMicronGeneric
2.00
480
2109:0583
0x2109
0x0583 (Digital Camera)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.8 MB/s
28.35 MB/s
27.97 MB/s
3,920 IOPS
2,715 IOPS
15,681 KB/s
10,863 KB/s
10,645 KB/s
10,384 KB/s
9,262 KB/s
11,538 KB/s

inxi Results
System: Host: draahnas Kernel: 4.19.102-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 335.6 MiB (8.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 211x57 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.102-v7l+ Network: Device-1: Huawei E33372 LTE/UMTS/GSM HiLink Modem/Networkcard type: USB driver: cdc_ether,usb-storage bus ID: 1-1.1:7 chip ID: 12d1:14dc IF: eth1 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::e5b:8fff:fe27:9a64/64 scope: link IF-ID-1: br0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fe2f:8bb6/64 scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-3: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v6: fe80::dea6:32ff:fe2f:8bb7/64 scope: link WAN IP: 213.162.X.X Drives: Local Storage: total: 480.60 GiB used: 140.39 GiB (29.2%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 3102 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.24%) used: 2.63 GiB (18.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /home/mnt raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 137.70 GiB (30.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: bbb56ce4-1948-4159-85fe-9c958f36305b Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:7 info: Huawei E33372 LTE/UMTS/GSM HiLink Modem/Networkcard type: Ethernet Network,CDC-Data,Mass Storage driver: cdc_ether,usb-storage interfaces: 3 rev: 2.1 speed: 480 Mb/s chip ID: 12d1:14dc Device-2: 1-1.4:3 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0583 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.3% command: [kworker/u8:0-events_unbound] pid: 10931 mem: 0.00 MiB (0.0%) 2: cpu: 0.4% command: bash pid: 10791 mem: 2.80 MiB (0.0%) 3: cpu: 0.1% command: [kworker/u8:3-events_unbound] pid: 7934 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: sudo pid: 10786 mem: 3.32 MiB (0.0%) 5: cpu: 0.0% command: systemd pid: 1 mem: 8.24 MiB (0.2%) Memory top: 5 1: mem: 46.4 MiB (1.1%) command: systemd-journald pid: 18820 cpu: 0.0% 2: mem: 17.1 MiB (0.4%) command: smbd pid: 4733 cpu: 0.0% 3: mem: 16.6 MiB (0.4%) command: smbd pid: 4734 cpu: 0.0% 4: mem: 16.3 MiB (0.4%) command: smbd pid: 765 cpu: 0.0% 5: mem: 14.9 MiB (0.3%) command: php-fpm: pid: 24159 cpu: 0.0% Info: Processes: 144 Uptime: 37d 18h 08m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:    Host: draahnas Kernel: 4.19.102-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 335.6 MiB (8.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 211x57 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.102-v7l+ 
Network:   Device-1: Huawei E33372 LTE/UMTS/GSM HiLink Modem/Networkcard type: USB driver: cdc_ether,usb-storage 
           bus ID: 1-1.1:7 chip ID: 12d1:14dc 
           IF: eth1 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IP v6: fe80::e5b:8fff:fe27:9a64/64 scope: link 
           IF-ID-1: br0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
           IP v6: fe80::dea6:32ff:fe2f:8bb6/64 scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-3: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v6: fe80::dea6:32ff:fe2f:8bb7/64 scope: link 
           WAN IP: 213.162.X.X 
Drives:    Local Storage: total: 480.60 GiB used: 140.39 GiB (29.2%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 465.76 GiB block size: physical: 4096 B 
           logical: 512 B rev: 3102 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.24%) used: 2.63 GiB (18.4%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /home/mnt raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 137.70 GiB (30.1%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: N/A uuid: bbb56ce4-1948-4159-85fe-9c958f36305b 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:7 info: Huawei E33372 LTE/UMTS/GSM HiLink Modem/Networkcard 
           type: Ethernet Network,CDC-Data,Mass Storage driver: cdc_ether,usb-storage interfaces: 3 rev: 2.1 speed: 480 Mb/s 
           chip ID: 12d1:14dc 
           Device-2: 1-1.4:3 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0583 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.3% command: [kworker/u8:0-events_unbound] pid: 10931 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.4% command: bash pid: 10791 mem: 2.80 MiB (0.0%) 
           3: cpu: 0.1% command: [kworker/u8:3-events_unbound] pid: 7934 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: sudo pid: 10786 mem: 3.32 MiB (0.0%) 
           5: cpu: 0.0% command: systemd pid: 1 mem: 8.24 MiB (0.2%) 
           Memory top: 5 
           1: mem: 46.4 MiB (1.1%) command: systemd-journald pid: 18820 cpu: 0.0% 
           2: mem: 17.1 MiB (0.4%) command: smbd pid: 4733 cpu: 0.0% 
           3: mem: 16.6 MiB (0.4%) command: smbd pid: 4734 cpu: 0.0% 
           4: mem: 16.3 MiB (0.4%) command: smbd pid: 765 cpu: 0.0% 
           5: mem: 14.9 MiB (0.3%) command: php-fpm: pid: 24159 cpu: 0.0% 
Info:      Processes: 144 Uptime: 37d 18h 08m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.38

Benchmark #14282 - Brand: Undentified JMicron USB to SATA Adapter