Benchmark #14296 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SB32G)
A1 C10
#159 / 1,701
114
#1,400 / 1,701
#253 / 405
1,074
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-30 12:20:30
#14,296
1,072
-2 (-0.19%)
Anonymous
sd

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SB32G)
A1 C10
29.5G
SD
SanDisk
SB32G
SDHC
5.00
0x03
SD
8.0
06/2003
Class 10
A1
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
550 (+50)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
14.5 MB/s
31.55 MB/s
36.79 MB/s
810 IOPS
3,058 IOPS
3,243 KB/s
12,235 KB/s
9,175 KB/s
3,396 KB/s
8,655 KB/s
2,539 KB/s

inxi Results
System: Kernel: 4.19.83-exton-v7l+ armv7l bits: 32 compiler: gcc v: 8.3.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=624 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=698e33bd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 701.2 MiB (17.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 151x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.83-exton-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-4: ztqu3pmkmx state: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 3.67 TiB used: 1.47 TiB (40.0%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: BUP BL size: 3.64 TiB block size: physical: 4096 B logical: 512 B rev: 0108 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.94 GiB (98.22%) used: 5.90 GiB (20.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.6 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA ID-3: /home//data raw size: 3.64 TiB size: 3.64 TiB (100.00%) used: 1.46 TiB (40.2%) fs: ntfs block size: 4096 B dev: /dev/sda2 label: Seagate Backup Plus Drive uuid: E4C4E90EC4E8E430 ID-4: /home/pi/data raw size: 3.64 TiB size: N/A (hidden?) used: N/A (hidden?) fs: ntfs dev: /dev/sda2 label: Seagate Backup Plus Drive uuid: E4C4E90EC4E8E430 Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab30 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/zerotier.list 1: deb http: //download.zerotier.com/debian/buster buster main Processes: CPU top: 5 1: cpu: 4.1% command: conky pid: 869 mem: 1.98 MiB (0.0%) 2: cpu: 2.0% command: ps pid: 17311 mem: 2.14 MiB (0.0%) 3: cpu: 0.7% command: xorg pid: 633 mem: 91.9 MiB (2.3%) 4: cpu: 0.5% command: nzbget pid: 545 mem: 185.5 MiB (4.7%) 5: cpu: 0.3% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 16008 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 185.5 MiB (4.7%) command: nzbget pid: 545 cpu: 0.5% 2: mem: 91.9 MiB (2.3%) command: xorg pid: 633 cpu: 0.7% 3: mem: 51.5 MiB (1.3%) command: systemd-journald pid: 18580 cpu: 0.0% 4: mem: 47.1 MiB (1.2%) command: mysqld pid: 30796 cpu: 0.1% 5: mem: 35.6 MiB (0.9%) command: lxpanel pid: 852 cpu: 0.0% Info: Processes: 185 Uptime: 89d 8h 10m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.83-exton-v7l+ armv7l bits: 32 compiler: gcc v: 8.3.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1184 
           bcm2708_fb.fbheight=624 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=698e33bd-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 701.2 MiB (17.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 151x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.83-exton-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: ztqu3pmkmx state: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 3.67 TiB used: 1.47 TiB (40.0%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: BUP BL size: 3.64 TiB block size: 
           physical: 4096 B logical: 512 B rev: 0108 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.94 GiB (98.22%) used: 5.90 GiB (20.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.6 MiB (20.9%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
           ID-3: /home//data raw size: 3.64 TiB size: 3.64 TiB (100.00%) 
           used: 1.46 TiB (40.2%) fs: ntfs block size: 4096 B dev: /dev/sda2 
           label: Seagate Backup Plus Drive uuid: E4C4E90EC4E8E430 
           ID-4: /home/pi/data raw size: 3.64 TiB size: N/A (hidden?) used: N/A (hidden?) fs: ntfs 
           dev: /dev/sda2 label: Seagate Backup Plus Drive uuid: E4C4E90EC4E8E430 
Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab30 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/zerotier.list 
           1: deb http: //download.zerotier.com/debian/buster buster main
Processes: CPU top: 5 
           1: cpu: 4.1% command: conky pid: 869 mem: 1.98 MiB (0.0%) 
           2: cpu: 2.0% command: ps pid: 17311 mem: 2.14 MiB (0.0%) 
           3: cpu: 0.7% command: xorg pid: 633 mem: 91.9 MiB (2.3%) 
           4: cpu: 0.5% command: nzbget pid: 545 mem: 185.5 MiB (4.7%) 
           5: cpu: 0.3% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 16008 
           mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 185.5 MiB (4.7%) command: nzbget pid: 545 cpu: 0.5% 
           2: mem: 91.9 MiB (2.3%) command: xorg pid: 633 cpu: 0.7% 
           3: mem: 51.5 MiB (1.3%) command: systemd-journald pid: 18580 cpu: 0.0% 
           4: mem: 47.1 MiB (1.2%) command: mysqld pid: 30796 cpu: 0.1% 
           5: mem: 35.6 MiB (0.9%) command: lxpanel pid: 852 cpu: 0.0% 
Info:      Processes: 185 Uptime: 89d 8h 10m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.38

Benchmark #14296 - Brand: SanDisk SD Ultra A1 (SB32G)