Benchmark #14300 - pibenchmarks.com

Brand: Samsung PM851 M.2 Series
SSD (M.2 SATA)
#415 / 1,700
28
#282 / 1,700
#279 / 989
#9 / 116
11,353
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-30 12:47:45
#14,300
5,396
-5,957 (-110.40%)
Anonymous
ssd

Storage Details
Samsung PM851 M.2 Series
SSD (M.2 SATA)
128G
SSD
Samsung
SSDPM8512.57mm128GB
SATA
1d6b:5030
0x1d6b (Linux Foundation)
0x5030 (FreeAgent GoFlex Upgrade Cable STAE104)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
79.3 MB/s
142.29 MB/s
133.41 MB/s
6,093 IOPS
4,603 IOPS
24,373 KB/s
18,413 KB/s
26,787 KB/s
22,552 KB/s
17,193 KB/s
26,133 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 289.1 MiB (7.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 151x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 148.36 GiB used: 12.32 GiB (8.3%) ID-1: /dev/mmcblk0 model: SMI size: 29.12 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD PM851 2.5 7mm 128GB size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 0211 drive rev: EXT08D0Q scheme: MBR SMART: yes state: enabled health: PASSED cycles: 1249 read: 4.06 TiB written: 4.46 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 117.07 GiB (98.39%) used: 6.14 GiB (5.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: BC50-2AE4 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: BC50-2AE4 ID-4: /media/pi/rootfs raw size: 28.87 GiB size: 28.35 GiB (98.23%) used: 6.08 GiB (21.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech LX710 Cordless Desktop Laser type: Keyboard,Mouse driver: logitech,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c517 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: Seagate RSS LLC FreeAgent GoFlex Upgrade Cable STAE104 type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:5030 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.6% command: init pid: 1 mem: 8.06 MiB (0.2%) 2: cpu: 2.0% command: xorg pid: 526 mem: 45.0 MiB (1.1%) 3: cpu: 1.6% command: lxpanel pid: 802 mem: 28.6 MiB (0.7%) 4: cpu: 1.4% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 5: cpu: 1.3% command: systemd-journald pid: 118 mem: 7.45 MiB (0.1%) Memory top: 5 1: mem: 45.0 MiB (1.1%) command: xorg pid: 526 cpu: 2.0% 2: mem: 28.6 MiB (0.7%) command: lxpanel pid: 802 cpu: 1.6% 3: mem: 22.2 MiB (0.5%) command: pcmanfm pid: 803 cpu: 1.1% 4: mem: 14.2 MiB (0.3%) command: openbox pid: 795 cpu: 0.2% 5: mem: 12.9 MiB (0.3%) command: packagekitd pid: 3629 cpu: 0.3% Info: Processes: 163 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 289.1 MiB (7.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 151x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 148.36 GiB used: 12.32 GiB (8.3%) 
           ID-1: /dev/mmcblk0 model: SMI size: 29.12 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD PM851 2.5 7mm 128GB 
           size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rev: 0211 drive rev: EXT08D0Q scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 1249 read: 4.06 TiB written: 4.46 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 117.07 GiB (98.39%) used: 6.14 GiB (5.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: BC50-2AE4 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: BC50-2AE4 
           ID-4: /media/pi/rootfs raw size: 28.87 GiB size: 28.35 GiB (98.23%) 
           used: 6.08 GiB (21.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech LX710 Cordless Desktop Laser type: Keyboard,Mouse 
           driver: logitech,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c517 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: Seagate RSS LLC FreeAgent GoFlex Upgrade Cable STAE104 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 0bc2:5030 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.6% command: init pid: 1 mem: 8.06 MiB (0.2%) 
           2: cpu: 2.0% command: xorg pid: 526 mem: 45.0 MiB (1.1%) 
           3: cpu: 1.6% command: lxpanel pid: 802 mem: 28.6 MiB (0.7%) 
           4: cpu: 1.4% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.3% command: systemd-journald pid: 118 mem: 7.45 MiB (0.1%) 
           Memory top: 5 
           1: mem: 45.0 MiB (1.1%) command: xorg pid: 526 cpu: 2.0% 
           2: mem: 28.6 MiB (0.7%) command: lxpanel pid: 802 cpu: 1.6% 
           3: mem: 22.2 MiB (0.5%) command: pcmanfm pid: 803 cpu: 1.1% 
           4: mem: 14.2 MiB (0.3%) command: openbox pid: 795 cpu: 0.2% 
           5: mem: 12.9 MiB (0.3%) command: packagekitd pid: 3629 cpu: 0.3% 
Info:      Processes: 163 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14300 - Brand: Samsung PM851 M.2 Series