Benchmark #14310 - pibenchmarks.com

Brand: Fujitsu 2.5" SATA HDD Series
HDD (2.5" SATA)
#529 / 1,679
17
#1,469 / 1,679
#983 / 69
#360 / 20
845
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2020-03-30 15:59:00
#14,310
750
-95 (-12.67%)
D3MO
Chinese UNITEK ssd box Raspberry 4 and simple hdd KLAIPEDA

Storage Details
Fujitsu 2.5" SATA HDD Series
HDD (2.5" SATA)
160G
HDD
Fujitsu
MHY2160BH
SATA
3.00
5,000
2109:0715
0x2109
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
33.8 MB/s
45.1 MB/s
35.44 MB/s
212 IOPS
289 IOPS
851 KB/s
1,156 KB/s
16,297 KB/s
11,083 KB/s
527 KB/s
852 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_ADDRESS = "lt_LT.UTF-8", LC_NAME = "lt_LT.UTF-8", LC_MONETARY = "lt_LT.UTF-8", LC_PAPER = "lt_LT.UTF-8", LC_IDENTIFICATION = "lt_LT.UTF-8", LC_TELEPHONE = "lt_LT.UTF-8", LC_MEASUREMENT = "lt_LT.UTF-8", LC_NUMERIC = "lt_LT.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 797.9 MiB (20.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 163.89 GiB used: 95.10 GiB (58.0%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Fujitsu model: MHY2160BH size: 149.05 GiB block size: physical: 512 B logical: 512 B rev: 0084 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 148.80 GiB size: 146.48 GiB (98.44%) used: 95.05 GiB (64.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 ID-2: /dev/mmcblk0p2 size: 1.84 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Samsung ML-216x Series Laser Printer type: Printer driver: usblp interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 04e8:330f Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0715 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/raspotify.list 1: deb https: //dtcooper.github.io/raspotify raspotify main Processes: CPU top: 5 1: cpu: 2.8% command: python pid: 691 mem: 185.3 MiB (4.7%) 2: cpu: 1.2% command: plex pid: 15776 mem: 32.8 MiB (0.8%) 3: cpu: 1.2% command: embyserver pid: 28783 mem: 161.9 MiB (4.1%) 4: cpu: 0.5% command: plex pid: 15746 mem: 47.3 MiB (1.2%) 5: cpu: 0.5% command: plex pid: 16557 mem: 28.4 MiB (0.7%) Memory top: 5 1: mem: 185.3 MiB (4.7%) command: python pid: 691 cpu: 2.8% 2: mem: 161.9 MiB (4.1%) command: embyserver pid: 28783 cpu: 1.2% 3: mem: 47.3 MiB (1.2%) command: plex pid: 15746 cpu: 0.5% 4: mem: 32.8 MiB (0.8%) command: plex pid: 15776 cpu: 1.2% 5: mem: 28.4 MiB (0.7%) command: plex pid: 16557 cpu: 0.5% Info: Processes: 153 Uptime: 8d 11h 19m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_ADDRESS = "lt_LT.UTF-8",
	LC_NAME = "lt_LT.UTF-8",
	LC_MONETARY = "lt_LT.UTF-8",
	LC_PAPER = "lt_LT.UTF-8",
	LC_IDENTIFICATION = "lt_LT.UTF-8",
	LC_TELEPHONE = "lt_LT.UTF-8",
	LC_MEASUREMENT = "lt_LT.UTF-8",
	LC_NUMERIC = "lt_LT.UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 797.9 MiB (20.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 163.89 GiB used: 95.10 GiB (58.0%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Fujitsu model: MHY2160BH size: 149.05 GiB block size: 
           physical: 512 B logical: 512 B rev: 0084 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 148.80 GiB size: 146.48 GiB (98.44%) used: 95.05 GiB (64.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
           ID-2: /dev/mmcblk0p2 size: 1.84 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Samsung ML-216x Series Laser Printer type: Printer 
           driver: usblp interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 04e8:330f 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 2109:0715 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspotify.list 
           1: deb https: //dtcooper.github.io/raspotify raspotify main
Processes: CPU top: 5 
           1: cpu: 2.8% command: python pid: 691 mem: 185.3 MiB (4.7%) 
           2: cpu: 1.2% command: plex pid: 15776 mem: 32.8 MiB (0.8%) 
           3: cpu: 1.2% command: embyserver pid: 28783 mem: 161.9 MiB (4.1%) 
           4: cpu: 0.5% command: plex pid: 15746 mem: 47.3 MiB (1.2%) 
           5: cpu: 0.5% command: plex pid: 16557 mem: 28.4 MiB (0.7%) 
           Memory top: 5 
           1: mem: 185.3 MiB (4.7%) command: python pid: 691 cpu: 2.8% 
           2: mem: 161.9 MiB (4.1%) command: embyserver pid: 28783 cpu: 1.2% 
           3: mem: 47.3 MiB (1.2%) command: plex pid: 15746 cpu: 0.5% 
           4: mem: 32.8 MiB (0.8%) command: plex pid: 15776 cpu: 1.2% 
           5: mem: 28.4 MiB (0.7%) command: plex pid: 16557 cpu: 0.5% 
Info:      Processes: 153 Uptime: 8d 11h 19m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14310 - Brand: Fujitsu 2.5" SATA HDD Series