Benchmark #14379 - pibenchmarks.com

Brand: SanDisk Extreme Go USB
USB Flash
#172 / 1,679
101
#1,396 / 1,679
#37 / 94
#38 / 89
1,052
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-31 13:50:34
#14,379
1,926
+874 (+45.38%)
Apostolos
SANDISK EXTREME GO 64GB on Pi 4

Storage Details
SanDisk Extreme Go USB
USB Flash
58.2G
USB Flash
SanDisk
Extreme
0781:558b
0x0781 (SanDisk Corp.)
0x558b
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
111 MB/s
141.27 MB/s
58.07 MB/s
508 IOPS
1,506 IOPS
2,032 KB/s
6,027 KB/s
18,403 KB/s
4,045 KB/s
6,289 KB/s
2,028 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.96 GiB used: 336.1 MiB (16.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 130x43 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: down mac: IF-ID-3: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 73.27 GiB used: 4.60 GiB (6.3%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme size: 58.44 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.18 GiB size: 57.25 GiB (98.40%) used: 4.55 GiB (8.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Texas Instruments type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:558b Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/mosquitto-buster.list 1: deb https: //repo.mosquitto.org/debian buster main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 7.6% command: hass started by: python3 pid: 589 mem: 85.1 MiB (4.2%) 2: cpu: 2.0% command: init pid: 1 mem: 8.05 MiB (0.4%) 3: cpu: 1.3% command: node pid: 753 mem: 53.4 MiB (2.6%) 4: cpu: 0.7% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 5: cpu: 0.7% command: hueemulator3.py started by: python3 pid: 842 mem: 21.1 MiB (1.0%) Memory top: 5 1: mem: 85.1 MiB (4.2%) command: hass started by: python3 pid: 589 cpu: 7.6% 2: mem: 57.7 MiB (2.9%) command: dockerd pid: 602 cpu: 0.3% 3: mem: 53.4 MiB (2.6%) command: node pid: 753 cpu: 1.3% 4: mem: 35.3 MiB (1.7%) command: npm pid: 598 cpu: 0.5% 5: mem: 30.8 MiB (1.5%) command: containerd pid: 599 cpu: 0.1% Info: Processes: 149 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.96 GiB used: 336.1 MiB (16.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 130x43 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 73.27 GiB used: 4.60 GiB (6.3%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme size: 58.44 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.18 GiB size: 57.25 GiB (98.40%) used: 4.55 GiB (8.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Texas Instruments type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0781:558b Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/mosquitto-buster.list 
           1: deb https: //repo.mosquitto.org/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 7.6% command: hass started by: python3 pid: 589 mem: 85.1 MiB (4.2%) 
           2: cpu: 2.0% command: init pid: 1 mem: 8.05 MiB (0.4%) 
           3: cpu: 1.3% command: node pid: 753 mem: 53.4 MiB (2.6%) 
           4: cpu: 0.7% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.7% command: hueemulator3.py started by: python3 pid: 842 mem: 21.1 MiB (1.0%) 
           Memory top: 5 
           1: mem: 85.1 MiB (4.2%) command: hass started by: python3 pid: 589 cpu: 7.6% 
           2: mem: 57.7 MiB (2.9%) command: dockerd pid: 602 cpu: 0.3% 
           3: mem: 53.4 MiB (2.6%) command: node pid: 753 cpu: 1.3% 
           4: mem: 35.3 MiB (1.7%) command: npm pid: 598 cpu: 0.5% 
           5: mem: 30.8 MiB (1.5%) command: containerd pid: 599 cpu: 0.1% 
Info:      Processes: 149 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14379 - Brand: SanDisk Extreme Go USB