Benchmark #14394 - pibenchmarks.com

Brand: Lexar SD OEM (NCard)
C4
#383 / 1,679
31
#1,538 / 1,679
#334 / 394
608
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-31 17:19:02
#14,394
431
-177 (-41.07%)
SzopeN

Secure Digital (SD) Card Details
Lexar SD OEM (NCard)
C4
7.2G
SD
Lexar
NCard
SDHC
3.00
0x82
JT
0.2
08/2014
Class 4
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
2.2 MB/s
18.62 MB/s
18.53 MB/s
33 IOPS
1,927 IOPS
135 KB/s
7,709 KB/s
7,191 KB/s
235 KB/s
6,059 KB/s
144 KB/s

inxi Results
System: Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 361.7 MiB (9.1%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 131x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: Aveo Camera type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.3:3 chip ID: 1871:0141 Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 7.48 GiB used: 4.89 GiB (65.3%) ID-1: /dev/mmcblk0 model: NCard size: 7.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.23 GiB size: 7.09 GiB (98.02%) used: 4.84 GiB (68.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Aveo Camera type: Video,Audio driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1871:0141 Device-2: 1-1.4:4 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 22.8% command: ./mjpg_streamer pid: 514 mem: 4.68 MiB (0.1%) 2: cpu: 8.7% command: octoprint started by: python2 pid: 480 mem: 90.3 MiB (2.3%) 3: cpu: 1.5% command: init pid: 1 mem: 8.03 MiB (0.2%) 4: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 142 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: [irq/39-mmc1] pid: 72 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 90.3 MiB (2.3%) command: octoprint started by: python2 pid: 480 cpu: 8.7% 2: mem: 10.4 MiB (0.2%) command: haproxy pid: 669 cpu: 0.0% 3: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 1.5% 4: mem: 7.04 MiB (0.1%) command: systemd-journald pid: 107 cpu: 0.2% 5: mem: 7.02 MiB (0.1%) command: systemd pid: 931 cpu: 0.0% Info: Processes: 121 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 4.9/8 clang: 7.0.1-8+rpi3 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 361.7 MiB (9.1%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 131x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: Aveo Camera type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.3:3 
           chip ID: 1871:0141 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 7.48 GiB used: 4.89 GiB (65.3%) 
           ID-1: /dev/mmcblk0 model: NCard size: 7.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.23 GiB size: 7.09 GiB (98.02%) used: 4.84 GiB (68.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Aveo Camera type: Video,Audio driver: snd-usb-audio,uvcvideo 
           interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1871:0141 
           Device-2: 1-1.4:4 info: QinHeng HL-340 USB-Serial adapter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 22.8% command: ./mjpg_streamer pid: 514 mem: 4.68 MiB (0.1%) 
           2: cpu: 8.7% command: octoprint started by: python2 pid: 480 mem: 90.3 MiB (2.3%) 
           3: cpu: 1.5% command: init pid: 1 mem: 8.03 MiB (0.2%) 
           4: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 142 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: [irq/39-mmc1] pid: 72 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 90.3 MiB (2.3%) command: octoprint started by: python2 pid: 480 cpu: 8.7% 
           2: mem: 10.4 MiB (0.2%) command: haproxy pid: 669 cpu: 0.0% 
           3: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 1.5% 
           4: mem: 7.04 MiB (0.1%) command: systemd-journald pid: 107 cpu: 0.2% 
           5: mem: 7.02 MiB (0.1%) command: systemd pid: 931 cpu: 0.0% 
Info:      Processes: 121 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 4.9/8 clang: 7.0.1-8+rpi3 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14394 - Brand: Lexar SD OEM (NCard)