Benchmark #14399 - pibenchmarks.com

Brand: SanDisk Ultra Luxe
USB Flash
#730 / 1,665
7
#1,368 / 1,665
#33 / 93
#35 / 89
1,063
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-31 18:50:58
#14,399
1,307
+244 (+18.67%)
Anonymous
z75

Storage Details
SanDisk Ultra Luxe
USB Flash
57G
USB Flash
SanDisk
UltraLuxe
1d6b:55a3
0x1d6b (Linux Foundation)
0x55a3
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
550 (+50)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
61.5 MB/s
127.75 MB/s
77.82 MB/s
383 IOPS
1,108 IOPS
1,533 KB/s
4,435 KB/s
18,687 KB/s
2,322 KB/s
6,382 KB/s
1,348 KB/s

inxi Results
System: Kernel: 4.19.108-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 423.4 MiB (21.0%) gpu: 320.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev,modesetting tty: 153x43 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 1.90 TiB used: 2.90 GiB (0.1%) ID-1: /dev/mmcblk0 model: SD16G size: 29.21 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: BUP Slim GD size: 1.82 TiB block size: physical: 4096 B logical: 512 B rev: 0304 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Luxe size: 57.28 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 57.03 GiB size: 56.08 GiB (98.35%) used: 2.85 GiB (5.1%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda2 size: 1.82 TiB fs: ext4 label: N/A uuid: 8c94c38c-da04-46ff-8c7d-e199dd150605 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:55a3 Device-2: 2-2:3 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.0% command: sshd: pid: 2345 mem: 5.39 MiB (0.3%) 2: cpu: 0.4% command: init pid: 1 mem: 7.74 MiB (0.4%) 3: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 1029 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [usb-storage] pid: 89 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: packagekitd pid: 1022 mem: 12.9 MiB (0.7%) Memory top: 5 1: mem: 12.9 MiB (0.7%) command: packagekitd pid: 1022 cpu: 0.1% 2: mem: 10.3 MiB (0.6%) command: udisksd pid: 284 cpu: 0.0% 3: mem: 10.2 MiB (0.6%) command: vncserver-x11-core pid: 382 cpu: 0.0% 4: mem: 7.74 MiB (0.4%) command: init pid: 1 cpu: 0.4% 5: mem: 7.21 MiB (0.4%) command: polkitd pid: 386 cpu: 0.0% Info: Processes: 121 Uptime: 19m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.108-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d9b3f436-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 423.4 MiB (21.0%) gpu: 320.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev,modesetting tty: 153x43 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 1.90 TiB used: 2.90 GiB (0.1%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 29.21 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: BUP Slim GD size: 1.82 TiB block size: 
           physical: 4096 B logical: 512 B rev: 0304 scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Luxe size: 57.28 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 57.03 GiB size: 56.08 GiB (98.35%) used: 2.85 GiB (5.1%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 1.82 TiB fs: ext4 label: N/A 
           uuid: 8c94c38c-da04-46ff-8c7d-e199dd150605 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0781:55a3 Device-2: 2-2:3 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.0% command: sshd: pid: 2345 mem: 5.39 MiB (0.3%) 
           2: cpu: 0.4% command: init pid: 1 mem: 7.74 MiB (0.4%) 
           3: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 1029 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: [usb-storage] pid: 89 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: packagekitd pid: 1022 mem: 12.9 MiB (0.7%) 
           Memory top: 5 
           1: mem: 12.9 MiB (0.7%) command: packagekitd pid: 1022 cpu: 0.1% 
           2: mem: 10.3 MiB (0.6%) command: udisksd pid: 284 cpu: 0.0% 
           3: mem: 10.2 MiB (0.6%) command: vncserver-x11-core pid: 382 cpu: 0.0% 
           4: mem: 7.74 MiB (0.4%) command: init pid: 1 cpu: 0.4% 
           5: mem: 7.21 MiB (0.4%) command: polkitd pid: 386 cpu: 0.0% 
Info:      Processes: 121 Uptime: 19m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14399 - Brand: SanDisk Ultra Luxe