Benchmark #14679 - pibenchmarks.com

Brand: KingSpec MT Series
SSD (mSATA)
#234 / 1,539
42
#426 / 1,539
#408 / 875
#17 / 69
6,627
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-04 01:54:25
#14,679
6,670
+43 (+0.64%)
lala
lala

Storage Details
KingSpec MT Series
SSD (mSATA)
64G
SSD
KingSpec
MT-64
2.5 inch
SATA
3.00
5,000
0850:0031
0x0850 (Fast Point Technologies, Inc.)
0x0031 (Document Processor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
73.1 MB/s
306.81 MB/s
79.15 MB/s
8,205 IOPS
14,797 IOPS
32,820 KB/s
59,190 KB/s
30,873 KB/s
27,306 KB/s
14,579 KB/s
33,460 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 1.25 GiB (32.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 315x77 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 63.42 GiB used: 2.79 GiB (4.4%) ID-1: /dev/mmcblk0 model: SU04G size: 3.80 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Micron model: MT-64 size: 59.63 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.37 GiB size: 58.19 GiB (98.01%) used: 2.74 GiB (4.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f45f1c9-9fe4-4e66-8347-5d8501ca758f ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 3.54 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Fast Point type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0850:0031 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 51.2% command: clamd pid: 393 mem: 735.7 MiB (18.8%) 2: cpu: 6.2% command: amavisd-new pid: 1130 mem: 87.2 MiB (2.2%) 3: cpu: 5.9% command: init pid: 1 mem: 8.05 MiB (0.2%) 4: cpu: 2.1% command: fail2ban-server started by: python3 pid: 626 mem: 15.2 MiB (0.3%) 5: cpu: 2.1% command: mysqld pid: 727 mem: 72.7 MiB (1.8%) Memory top: 5 1: mem: 735.7 MiB (18.8%) command: clamd pid: 393 cpu: 51.2% 2: mem: 87.2 MiB (2.2%) command: amavisd-new pid: 1130 cpu: 6.2% 3: mem: 83.2 MiB (2.1%) command: amavisd-new pid: 1237 cpu: 0.0% 4: mem: 83.2 MiB (2.1%) command: amavisd-new pid: 1238 cpu: 0.0% 5: mem: 72.7 MiB (1.8%) command: mysqld pid: 727 cpu: 2.1% Info: Processes: 206 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 1.25 GiB (32.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 315x77 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 63.42 GiB used: 2.79 GiB (4.4%) 
           ID-1: /dev/mmcblk0 model: SU04G size: 3.80 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Micron model: MT-64 size: 59.63 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.37 GiB size: 58.19 GiB (98.01%) used: 2.74 GiB (4.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f45f1c9-9fe4-4e66-8347-5d8501ca758f 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 3.54 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Fast Point type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 0850:0031 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 51.2% command: clamd pid: 393 mem: 735.7 MiB (18.8%) 
           2: cpu: 6.2% command: amavisd-new pid: 1130 mem: 87.2 MiB (2.2%) 
           3: cpu: 5.9% command: init pid: 1 mem: 8.05 MiB (0.2%) 
           4: cpu: 2.1% command: fail2ban-server started by: python3 pid: 626 mem: 15.2 MiB (0.3%) 
           5: cpu: 2.1% command: mysqld pid: 727 mem: 72.7 MiB (1.8%) 
           Memory top: 5 
           1: mem: 735.7 MiB (18.8%) command: clamd pid: 393 cpu: 51.2% 
           2: mem: 87.2 MiB (2.2%) command: amavisd-new pid: 1130 cpu: 6.2% 
           3: mem: 83.2 MiB (2.1%) command: amavisd-new pid: 1237 cpu: 0.0% 
           4: mem: 83.2 MiB (2.1%) command: amavisd-new pid: 1238 cpu: 0.0% 
           5: mem: 72.7 MiB (1.8%) command: mysqld pid: 727 cpu: 2.1% 
Info:      Processes: 206 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14679 - Brand: KingSpec MT Series