Benchmark #14705 - pibenchmarks.com

Brand: SanDisk SD Extreme (SU08G)
C4
#156 / 1,539
68
#1,437 / 1,539
#343 / 369
470
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-04 06:30:36
#14,705
426
-44 (-10.33%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme (SU08G)
C4
7.2G
SD
SanDisk
SU08G
SDHC
3.00
0x03
SD
8.0
05/2012
Class 4
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
4.6 MB/s
21.88 MB/s
21.72 MB/s
33 IOPS
1,534 IOPS
133 KB/s
6,138 KB/s
6,707 KB/s
1,486 KB/s
5,628 KB/s
138 KB/s

inxi Results
System: Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 334.8 MiB (33.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 168x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 938.88 GiB used: 6.50 GiB (0.7%) ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Book 1140 drive model: WD10EARX-32N0YB0 family: Green size: 931.48 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 1012 drive rev: 51.0AB51 temp: 23 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 78d 1h cycles: 2665 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.15 GiB size: 7.01 GiB (98.00%) used: 6.03 GiB (86.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /mnt/wdstorage raw size: 931.48 GiB size: 915.86 GiB (98.32%) used: 432.4 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: data uuid: 6241c8b1-40a2-4b16-9aef-605e86a8348b Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:1140 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/php.list 1: deb https: //packages.sury.org/php/ buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.2% command: lfd pid: 16541 mem: 18.3 MiB (1.9%) 2: cpu: 0.1% command: [kworker/0:2-mm_percpu_wq] pid: 12922 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: sshd: pid: 12982 mem: 5.75 MiB (0.6%) 4: cpu: 0.1% command: sshd: pid: 13007 mem: 3.87 MiB (0.4%) 5: cpu: 0.0% command: init pid: 1 mem: 8.07 MiB (0.8%) Memory top: 5 1: mem: 72.5 MiB (7.8%) command: mysqld pid: 559 cpu: 0.0% 2: mem: 44.4 MiB (4.7%) command: apache2 pid: 22686 cpu: 0.0% 3: mem: 37.7 MiB (4.0%) command: apache2 pid: 16536 cpu: 0.0% 4: mem: 37.7 MiB (4.0%) command: apache2 pid: 16539 cpu: 0.0% 5: mem: 37.2 MiB (4.0%) command: apache2 pid: 27106 cpu: 0.0% Info: Processes: 137 Uptime: 19h 13m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 334.8 MiB (33.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 168x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 938.88 GiB used: 6.50 GiB (0.7%) 
           ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Book 1140 
           drive model: WD10EARX-32N0YB0 family: Green size: 931.48 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 1012 drive rev: 51.0AB51 temp: 23 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 78d 1h cycles: 2665 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.15 GiB size: 7.01 GiB (98.00%) used: 6.03 GiB (86.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /mnt/wdstorage raw size: 931.48 GiB size: 915.86 GiB (98.32%) 
           used: 432.4 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: data 
           uuid: 6241c8b1-40a2-4b16-9aef-605e86a8348b 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:1140 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/php.list 
           1: deb https: //packages.sury.org/php/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.2% command: lfd pid: 16541 mem: 18.3 MiB (1.9%) 
           2: cpu: 0.1% command: [kworker/0:2-mm_percpu_wq] pid: 12922 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: sshd: pid: 12982 mem: 5.75 MiB (0.6%) 
           4: cpu: 0.1% command: sshd: pid: 13007 mem: 3.87 MiB (0.4%) 
           5: cpu: 0.0% command: init pid: 1 mem: 8.07 MiB (0.8%) 
           Memory top: 5 
           1: mem: 72.5 MiB (7.8%) command: mysqld pid: 559 cpu: 0.0% 
           2: mem: 44.4 MiB (4.7%) command: apache2 pid: 22686 cpu: 0.0% 
           3: mem: 37.7 MiB (4.0%) command: apache2 pid: 16536 cpu: 0.0% 
           4: mem: 37.7 MiB (4.0%) command: apache2 pid: 16539 cpu: 0.0% 
           5: mem: 37.2 MiB (4.0%) command: apache2 pid: 27106 cpu: 0.0% 
Info:      Processes: 137 Uptime: 19h 13m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14705 - Brand: SanDisk SD Extreme (SU08G)