Benchmark #14786 - pibenchmarks.com

Brand: TCSUNBOW M1 Series
SSD (mSATA)
#511 / 1,672
16
#981 / 1,672
#905 / 983
#56 / 69
3,444
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-04-04 15:51:02
#14,786
2,866
-578 (-20.17%)
Elzershark
Sunbow mSATA Mini PCIE 32gb M1 Series SSD using Renkforce USB/mSATA-Konverter-Shield

Storage Details
TCSUNBOW M1 Series
SSD (mSATA)
32G
SSD
TCSUNBOW
M132GB
mSATA
SATA
2.00
480
2109:0229
0x2109
0x0229
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
18.1 MB/s
32.41 MB/s
32.09 MB/s
4,746 IOPS
5,100 IOPS
18,984 KB/s
20,403 KB/s
14,975 KB/s
12,284 KB/s
10,629 KB/s
13,057 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=17869b7d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 1.44 GiB (37.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: N/A tty: 130x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: down mac: IF-ID-3: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 44.68 GiB used: 8.24 GiB (18.5%) ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: TCSunBow model: M1 32GB size: 29.82 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: SBFM temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 1d 20h cycles: 680 written: 7.4 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 29.09 GiB (98.39%) used: 8.19 GiB (28.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /media/magentacloud raw size: N/A size: 1.24 TiB used: 762.94 GiB (60.0%) fs: fuse remote: https://webdav.magentacloud.de label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 14.61 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Device-2: 1-1.2:5 info: Texas Instruments type: driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16ae Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.8% command: iobroker.js-controller pid: 586 mem: 98.4 MiB (2.5%) 2: cpu: 5.1% command: io.iot.0 pid: 8015 mem: 75.5 MiB (1.9%) 3: cpu: 3.5% command: io.info.0 pid: 773 mem: 78.1 MiB (2.0%) 4: cpu: 2.1% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 9948 mem: 0.00 MiB (0.0%) 5: cpu: 1.9% command: io.javascript.0 pid: 27267 mem: 117.6 MiB (3.0%) Memory top: 5 1: mem: 269.6 MiB (6.9%) command: io.sonoff.0 pid: 1728 cpu: 0.4% 2: mem: 117.6 MiB (3.0%) command: io.javascript.0 pid: 27267 cpu: 1.9% 3: mem: 98.4 MiB (2.5%) command: iobroker.js-controller pid: 586 cpu: 6.8% 4: mem: 88.0 MiB (2.2%) command: io.tuya.0 pid: 1705 cpu: 0.5% 5: mem: 78.1 MiB (2.0%) command: io.info.0 pid: 773 cpu: 3.5% Info: Processes: 164 Uptime: 8d 7h 02m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=17869b7d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 1.44 GiB (37.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: N/A tty: 130x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 44.68 GiB used: 8.24 GiB (18.5%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: TCSunBow model: M1 32GB size: 29.82 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: SBFM temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 1d 20h cycles: 680 written: 7.4 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.56 GiB size: 29.09 GiB (98.39%) used: 8.19 GiB (28.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /media/magentacloud raw size: N/A size: 1.24 TiB used: 762.94 GiB (60.0%) 
           fs: fuse remote: https://webdav.magentacloud.de label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.61 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage 
           driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Device-2: 1-1.2:5 info: Texas Instruments type:  driver: N/A 
           interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16ae 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.8% command: iobroker.js-controller pid: 586 mem: 98.4 MiB (2.5%) 
           2: cpu: 5.1% command: io.iot.0 pid: 8015 mem: 75.5 MiB (1.9%) 
           3: cpu: 3.5% command: io.info.0 pid: 773 mem: 78.1 MiB (2.0%) 
           4: cpu: 2.1% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 9948 
           mem: 0.00 MiB (0.0%) 
           5: cpu: 1.9% command: io.javascript.0 pid: 27267 mem: 117.6 MiB (3.0%) 
           Memory top: 5 
           1: mem: 269.6 MiB (6.9%) command: io.sonoff.0 pid: 1728 cpu: 0.4% 
           2: mem: 117.6 MiB (3.0%) command: io.javascript.0 pid: 27267 cpu: 1.9% 
           3: mem: 98.4 MiB (2.5%) command: iobroker.js-controller pid: 586 cpu: 6.8% 
           4: mem: 88.0 MiB (2.2%) command: io.tuya.0 pid: 1705 cpu: 0.5% 
           5: mem: 78.1 MiB (2.0%) command: io.info.0 pid: 773 cpu: 3.5% 
Info:      Processes: 164 Uptime: 8d 7h 02m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14786 - Brand: TCSUNBOW M1 Series