Benchmark #14802 - pibenchmarks.com

Brand: Kingston SD Digital (SD32G)
C10 U1
#239 / 1,701
71
#1,551 / 1,701
#343 / 405
630
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-04 18:20:43
#14,802
445
-185 (-41.57%)
Anonymous

Secure Digital (SD) Card Details
Kingston SD Digital (SD32G)
C10 U1
29.1G
SD
Kingston
SD32G
SDHC
3.00
0x41
42
3.0
04/2016
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
13 MB/s
21.78 MB/s
21.79 MB/s
181 IOPS
1,332 IOPS
726 KB/s
5,331 KB/s
4,734 KB/s
794 KB/s
3,274 KB/s
544 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 197.5 MiB (19.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 142x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 960.77 GiB used: 179.78 GiB (18.7%) ID-1: /dev/mmcblk0 model: SD32G size: 29.29 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD10JMVW-11AJGS3 size: 931.48 GiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: 1065 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.12 GiB size: 28.54 GiB (98.00%) used: 6.05 GiB (21.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 82849393-8c99-4543-8084-ccfcc9beb602 ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.3 MiB (32.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 44DD-750B ID-3: /mnt raw size: 931.48 GiB size: 915.86 GiB (98.32%) used: 173.71 GiB (19.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 409e79fb-562d-4fc1-842e-f13af9a365fa Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 007A-27CE ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 3303e274-8d19-4396-a602-ad5be3f1e758 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:4 info: Western Digital My Passport Ultra (WDBZFP) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:0830 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 0.4% command: dockerd pid: 17166 mem: 23.9 MiB (2.5%) 2: cpu: 0.1% command: containerd pid: 1621 mem: 11.6 MiB (1.2%) 3: cpu: 0.1% command: bash pid: 5167 mem: 2.55 MiB (0.2%) 4: cpu: 0.0% command: init pid: 1 mem: 4.14 MiB (0.4%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 23.9 MiB (2.5%) command: dockerd pid: 17166 cpu: 0.4% 2: mem: 11.6 MiB (1.2%) command: containerd pid: 1621 cpu: 0.1% 3: mem: 5.62 MiB (0.6%) command: sshd: pid: 4754 cpu: 0.0% 4: mem: 4.76 MiB (0.5%) command: systemd pid: 4761 cpu: 0.0% 5: mem: 4.14 MiB (0.4%) command: init pid: 1 cpu: 0.0% Info: Processes: 120 Uptime: 1d 2h 13m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 197.5 MiB (19.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 142x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 960.77 GiB used: 179.78 GiB (18.7%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 29.29 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD10JMVW-11AJGS3 
           size: 931.48 GiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm 
           rev: 1065 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.12 GiB size: 28.54 GiB (98.00%) used: 6.05 GiB (21.2%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: 82849393-8c99-4543-8084-ccfcc9beb602 
           ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.3 MiB (32.9%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 44DD-750B 
           ID-3: /mnt raw size: 931.48 GiB size: 915.86 GiB (98.32%) used: 173.71 GiB (19.0%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A 
           uuid: 409e79fb-562d-4fc1-842e-f13af9a365fa 
Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 007A-27CE 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 3303e274-8d19-4396-a602-ad5be3f1e758 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.3:4 info: Western Digital My Passport Ultra (WDBZFP) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:0830 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 0.4% command: dockerd pid: 17166 mem: 23.9 MiB (2.5%) 
           2: cpu: 0.1% command: containerd pid: 1621 mem: 11.6 MiB (1.2%) 
           3: cpu: 0.1% command: bash pid: 5167 mem: 2.55 MiB (0.2%) 
           4: cpu: 0.0% command: init pid: 1 mem: 4.14 MiB (0.4%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 23.9 MiB (2.5%) command: dockerd pid: 17166 cpu: 0.4% 
           2: mem: 11.6 MiB (1.2%) command: containerd pid: 1621 cpu: 0.1% 
           3: mem: 5.62 MiB (0.6%) command: sshd: pid: 4754 cpu: 0.0% 
           4: mem: 4.76 MiB (0.5%) command: systemd pid: 4761 cpu: 0.0% 
           5: mem: 4.14 MiB (0.4%) command: init pid: 1 cpu: 0.0% 
Info:      Processes: 120 Uptime: 1d 2h 13m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #14802 - Brand: Kingston SD Digital (SD32G)