Benchmark #14882 - pibenchmarks.com

Brand: Micro Center USB Flash Drive
USB Flash
#453 / 1,679
23
#1,431 / 1,679
#48 / 94
#46 / 89
972
	Amazon.com

Overview
2020-04-05 11:25:49
#14,882
744
-228 (-30.65%)
Anonymous
1qqq

Storage Details
Micro Center USB Flash Drive
USB Flash
708G
USB Flash
MicroCenter
USBDISK
3.10
5,000
090c:2000
0x090c
0x2000 (SoftGate 802.11 Adapter)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
4.9 MB/s
77.3 MB/s
74.97 MB/s
131 IOPS
2,754 IOPS
527 KB/s
11,016 KB/s
11,875 KB/s
2,480 KB/s
9,999 KB/s
366 KB/s

inxi Results
System: Kernel: 5.3.0-1017-raspi2 aarch64 bits: 64 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.78 GiB used: 347.4 MiB (9.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 190x46 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 66.39 GiB used: 1.65 GiB (2.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: SMI USB DISK size: 58.98 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.73 GiB size: 57.77 GiB (98.36%) used: 1.58 GiB (2.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 69.7 MiB (27.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 85F3-CC2B Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 85F3-CC2B ID-2: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: writable uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Silicon Motion - Taiwan (formerly Feiya ) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 090c:2000 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 1.8% command: init pid: 1 mem: 8.73 MiB (0.2%) 2: cpu: 0.4% command: [usb-storage] pid: 315 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: systemd-udevd pid: 834 mem: 3.51 MiB (0.0%) 5: cpu: 0.1% command: dbus-daemon pid: 1386 mem: 3.43 MiB (0.0%) Memory top: 5 1: mem: 18.7 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 1407 cpu: 0.0% 2: mem: 15.8 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 1396 cpu: 0.0% 3: mem: 8.73 MiB (0.2%) command: init pid: 1 cpu: 1.8% 4: mem: 7.65 MiB (0.2%) command: systemd-journald pid: 824 cpu: 0.0% 5: mem: 7.18 MiB (0.1%) command: systemd pid: 1692 cpu: 0.0% Info: Processes: 137 Uptime: 6m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

inxi Results

System:    Kernel: 5.3.0-1017-raspi2 aarch64 bits: 64 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable 
           rootfstype=ext4 elevator=deadline rootwait fixrtc 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.78 GiB used: 347.4 MiB (9.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 190x46 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 66.39 GiB used: 1.65 GiB (2.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: SMI USB DISK size: 58.98 GiB block size: 
           physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.73 GiB size: 57.77 GiB (98.36%) used: 1.58 GiB (2.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 69.7 MiB (27.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 85F3-CC2B 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: 85F3-CC2B 
           ID-2: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: writable 
           uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Silicon Motion - Taiwan (formerly Feiya ) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 090c:2000 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 1.8% command: init pid: 1 mem: 8.73 MiB (0.2%) 
           2: cpu: 0.4% command: [usb-storage] pid: 315 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: systemd-udevd pid: 834 mem: 3.51 MiB (0.0%) 
           5: cpu: 0.1% command: dbus-daemon pid: 1386 mem: 3.43 MiB (0.0%) 
           Memory top: 5 
           1: mem: 18.7 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1407 cpu: 0.0% 
           2: mem: 15.8 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 1396 
           cpu: 0.0% 
           3: mem: 8.73 MiB (0.2%) command: init pid: 1 cpu: 1.8% 
           4: mem: 7.65 MiB (0.2%) command: systemd-journald pid: 824 cpu: 0.0% 
           5: mem: 7.18 MiB (0.1%) command: systemd pid: 1692 cpu: 0.0% 
Info:      Processes: 137 Uptime: 6m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

Benchmark #14882 - Brand: Micro Center USB Flash Drive