Benchmark #14889 - pibenchmarks.com

Brand: Intel 313 Series
SSD (2.5" SATA)
#102 / 1,700
187
#894 / 1,700
#850 / 989
#288 / 370
4,690
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-05 12:09:38
#14,889
5,780
+1,090 (+18.86%)
Anonymous
intel ssd on pi 4 4gb

Storage Details
Intel 313 Series
SSD (2.5" SATA)
80G
SSD
Intel
SSDSA2CW080G3
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
62.8 MB/s
219.58 MB/s
173.48 MB/s
12,075 IOPS
19,230 IOPS
48,301 KB/s
76,920 KB/s
27,278 KB/s
23,577 KB/s
14,117 KB/s
20,957 KB/s

inxi Results
System: Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 263.9 MiB (6.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 174x31 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: WAN IP: Drives: Local Storage: total: 104.25 GiB used: 2.20 GiB (2.1%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intel model: SSDSA2CW080G3 family: 320 Series SSDs size: 74.53 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 4PC10362 scheme: MBR SMART: yes state: enabled health: PASSED on: 3y 9d 6h cycles: 3347 read: 2.61 TiB written: 6.20 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.05 GiB (7.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /sharedfolders/Appdata raw size: 44.78 GiB size: 43.83 GiB (97.87%) used: 100.5 MiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: data uuid: a3d02ef2-7e8a-4032-b9dc-d45828f4af76 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/omvextras.list 1: deb https: //dl.bintray.com/openmediavault-plugin-developers/usul buster main 2: deb https: //dl.bintray.com/openmediavault-plugin-developers/usul-extras buster main Active apt repos in: /etc/apt/sources.list.d/openmediavault-local.list 1: deb [trusted=yes] file: /var/cache/openmediavault/archives / Active apt repos in: /etc/apt/sources.list.d/openmediavault.list 1: deb http: //packages.openmediavault.org/public/ usul main 2: deb https: //openmediavault.github.io/packages/ usul main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.0% command: php-fpm: pid: 5529 mem: 14.3 MiB (0.3%) 2: cpu: 3.9% command: php-fpm: pid: 5481 mem: 14.4 MiB (0.3%) 3: cpu: 2.3% command: salt-minion started by: python3 pid: 768 mem: 36.1 MiB (0.9%) 4: cpu: 1.5% command: init pid: 1 mem: 8.41 MiB (0.2%) 5: cpu: 1.2% command: [kworker/u8:1-events_unbound] pid: 12976 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 36.1 MiB (0.9%) command: salt-minion started by: python3 pid: 768 cpu: 2.3% 2: mem: 20.6 MiB (0.5%) command: salt-minion started by: python3 pid: 678 cpu: 0.1% 3: mem: 17.6 MiB (0.4%) command: salt-minion started by: python3 pid: 770 cpu: 0.0% 4: mem: 16.7 MiB (0.4%) command: php-fpm: pid: 684 cpu: 0.0% 5: mem: 15.9 MiB (0.4%) command: smbd pid: 746 cpu: 0.0% Info: Processes: 147 Uptime: 17m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 263.9 MiB (6.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 174x31 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 104.25 GiB used: 2.20 GiB (2.1%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intel model: SSDSA2CW080G3 family: 320 Series SSDs 
           size: 74.53 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s 
           rev: 4PC10362 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3y 9d 6h cycles: 3347 read: 2.61 TiB 
           written: 6.20 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.05 GiB (7.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /sharedfolders/Appdata raw size: 44.78 GiB size: 43.83 GiB (97.87%) 
           used: 100.5 MiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: data 
           uuid: a3d02ef2-7e8a-4032-b9dc-d45828f4af76 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/omvextras.list 
           1: deb https: //dl.bintray.com/openmediavault-plugin-developers/usul buster main
           2: deb https: //dl.bintray.com/openmediavault-plugin-developers/usul-extras buster main
           Active apt repos in: /etc/apt/sources.list.d/openmediavault-local.list 
           1: deb [trusted=yes] file: /var/cache/openmediavault/archives /
           Active apt repos in: /etc/apt/sources.list.d/openmediavault.list 
           1: deb http: //packages.openmediavault.org/public/ usul main
           2: deb https: //openmediavault.github.io/packages/ usul main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.0% command: php-fpm: pid: 5529 mem: 14.3 MiB (0.3%) 
           2: cpu: 3.9% command: php-fpm: pid: 5481 mem: 14.4 MiB (0.3%) 
           3: cpu: 2.3% command: salt-minion started by: python3 pid: 768 mem: 36.1 MiB (0.9%) 
           4: cpu: 1.5% command: init pid: 1 mem: 8.41 MiB (0.2%) 
           5: cpu: 1.2% command: [kworker/u8:1-events_unbound] pid: 12976 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 36.1 MiB (0.9%) command: salt-minion started by: python3 pid: 768 cpu: 2.3% 
           2: mem: 20.6 MiB (0.5%) command: salt-minion started by: python3 pid: 678 cpu: 0.1% 
           3: mem: 17.6 MiB (0.4%) command: salt-minion started by: python3 pid: 770 cpu: 0.0% 
           4: mem: 16.7 MiB (0.4%) command: php-fpm: pid: 684 cpu: 0.0% 
           5: mem: 15.9 MiB (0.4%) command: smbd pid: 746 cpu: 0.0% 
Info:      Processes: 147 Uptime: 17m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14889 - Brand: Intel 313 Series