Benchmark #14906 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#107 / 1,679
170
#679 / 1,679
#656 / 984
#25 / 69
6,097
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-05 13:44:39
#14,906
8,152
+2,055 (+25.21%)
Anonymous
test_ssd

Storage Details
Transcend MSA Series
SSD (mSATA)
128G
SSD
Transcend
TS128GMSA230S
SATA
3.00
5,000
1d6b:0856
0x1d6b (Linux Foundation)
0x0856
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
153 MB/s
288.86 MB/s
266.15 MB/s
8,414 IOPS
22,579 IOPS
33,656 KB/s
90,319 KB/s
30,747 KB/s
27,847 KB/s
21,771 KB/s
33,846 KB/s

inxi Results
System: Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=0189c384-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 203.7 MiB (5.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 148.97 GiB used: 10.63 GiB (7.1%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: TS128GMSA230S size: 119.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 39.27 GiB size: 38.15 GiB (97.15%) used: 10.58 GiB (27.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9F2D-0578 Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 9F2D-0578 ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-3: /dev/sda3 size: 19.61 GiB fs: ext3 label: N/A uuid: 5c24141e-d374-4f81-a463-fc7b0505f64b ID-4: /dev/sda4 size: 19.60 GiB fs: f2fs label: N/A uuid: d676d2e7-277a-4131-98f2-314ffe7f9b4a USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0856 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/balena-etcher.list 1: deb https: //deb.etcher.io stable etcher Active apt repos in: /etc/apt/sources.list.d/etcher.list 1: deb https: //dl.bintray.com/resin-io/debian stable etcher Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.3% command: init pid: 1 mem: 7.86 MiB (0.2%) 2: cpu: 0.3% command: packagekitd pid: 844 mem: 13.0 MiB (0.3%) 3: cpu: 0.1% command: bash pid: 645 mem: 2.77 MiB (0.0%) 4: cpu: 0.1% command: polkitd pid: 848 mem: 7.04 MiB (0.1%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 13.0 MiB (0.3%) command: packagekitd pid: 844 cpu: 0.3% 2: mem: 7.88 MiB (0.2%) command: cups-browsed pid: 417 cpu: 0.0% 3: mem: 7.86 MiB (0.2%) command: init pid: 1 cpu: 0.3% 4: mem: 7.04 MiB (0.1%) command: polkitd pid: 848 cpu: 0.1% 5: mem: 6.98 MiB (0.1%) command: systemd pid: 571 cpu: 0.0% Info: Processes: 112 Uptime: 21m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=0189c384-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 203.7 MiB (5.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 148.97 GiB used: 10.63 GiB (7.1%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS128GMSA230S size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 39.27 GiB size: 38.15 GiB (97.15%) used: 10.58 GiB (27.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9F2D-0578 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 9F2D-0578 
           ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-3: /dev/sda3 size: 19.61 GiB fs: ext3 label: N/A 
           uuid: 5c24141e-d374-4f81-a463-fc7b0505f64b 
           ID-4: /dev/sda4 size: 19.60 GiB fs: f2fs label: N/A 
           uuid: d676d2e7-277a-4131-98f2-314ffe7f9b4a 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0856 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/balena-etcher.list 
           1: deb https: //deb.etcher.io stable etcher
           Active apt repos in: /etc/apt/sources.list.d/etcher.list 
           1: deb https: //dl.bintray.com/resin-io/debian stable etcher
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.3% command: init pid: 1 mem: 7.86 MiB (0.2%) 
           2: cpu: 0.3% command: packagekitd pid: 844 mem: 13.0 MiB (0.3%) 
           3: cpu: 0.1% command: bash pid: 645 mem: 2.77 MiB (0.0%) 
           4: cpu: 0.1% command: polkitd pid: 848 mem: 7.04 MiB (0.1%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 13.0 MiB (0.3%) command: packagekitd pid: 844 cpu: 0.3% 
           2: mem: 7.88 MiB (0.2%) command: cups-browsed pid: 417 cpu: 0.0% 
           3: mem: 7.86 MiB (0.2%) command: init pid: 1 cpu: 0.3% 
           4: mem: 7.04 MiB (0.1%) command: polkitd pid: 848 cpu: 0.1% 
           5: mem: 6.98 MiB (0.1%) command: systemd pid: 571 cpu: 0.0% 
Info:      Processes: 112 Uptime: 21m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14906 - Brand: Transcend MSA Series