Benchmark #14998 - pibenchmarks.com

Brand: AData SU800
SSD (2.5" SATA)
#131 / 1,677
135
#614 / 1,677
#592 / 984
#142 / 370
6,375
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-06 13:50:59
#14,998
5,958
-417 (-7.00%)
Anonymous
Adata SU800 Rpi4 Sweex USB3

Storage Details
AData SU800
SSD (2.5" SATA)
256G
SSD
AData
SU800
2.5 inch
SATA
3.00
5,000
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
166 MB/s
145.95 MB/s
146.85 MB/s
5,435 IOPS
4,144 IOPS
21,740 KB/s
16,579 KB/s
23,727 KB/s
20,476 KB/s
16,986 KB/s
24,284 KB/s

inxi Results
System: Kernel: 4.19.113-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=2df84b67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 719.2 MiB (18.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1280x1024~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 253.22 GiB used: 25.57 GiB (10.1%) ID-1: /dev/mmcblk0 model: USDU1 size: 14.75 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: A-Data model: SU800 size: 238.47 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: R0427ANR temp: 42 C scheme: MBR SMART: yes state: enabled health: PASSED on: 44 hrs cycles: 29 read: 603 KiB written: 683 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 25.52 GiB (10.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 6b9b8e96-6395-46b2-bcf5-58002b6df1ca ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.18 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 237D-FC92 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Cypress USB to Serial type: HID driver: usbfs interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0665:5161 Device-2: 1-1.3:4 info: Future Devices Bridge(I2C/SPI/UART/FIFO) type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6015 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/zulu.list 1: deb http: //repos.azulsystems.com/debian stable main Processes: CPU top: 5 1: cpu: 30.2% command: java pid: 490 mem: 318.5 MiB (8.1%) 2: cpu: 5.2% command: ./solpiplog pid: 1284 mem: 28.3 MiB (0.7%) 3: cpu: 2.1% command: redis-server pid: 589 mem: 4.04 MiB (0.1%) 4: cpu: 1.0% command: apache2 pid: 3302 mem: 15.5 MiB (0.3%) 5: cpu: 1.0% command: packagekitd pid: 3865 mem: 12.8 MiB (0.3%) Memory top: 5 1: mem: 318.5 MiB (8.1%) command: java pid: 490 cpu: 30.2% 2: mem: 70.4 MiB (1.8%) command: mysqld pid: 679 cpu: 0.6% 3: mem: 58.4 MiB (1.4%) command: xorg pid: 586 cpu: 0.7% 4: mem: 49.4 MiB (1.2%) command: lxterminal pid: 2830 cpu: 0.4% 5: mem: 29.0 MiB (0.7%) command: lxpanel pid: 1239 cpu: 0.2% Info: Processes: 165 Uptime: 12m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.113-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1280 
           bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 
           root=PARTUUID=2df84b67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 719.2 MiB (18.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1280x1024~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 253.22 GiB used: 25.57 GiB (10.1%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 14.75 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: A-Data model: SU800 size: 238.47 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: R0427ANR 
           temp: 42 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 44 hrs cycles: 29 read: 603 KiB 
           written: 683 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 25.52 GiB (10.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 6b9b8e96-6395-46b2-bcf5-58002b6df1ca 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (21.0%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.18 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 237D-FC92 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: Cypress USB to Serial type: HID driver: usbfs interfaces: 1 
           rev: 2.0 speed: 12 Mb/s chip ID: 0665:5161 
           Device-2: 1-1.3:4 info: Future Devices Bridge(I2C/SPI/UART/FIFO) 
           type:  driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0403:6015 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/zulu.list 
           1: deb http: //repos.azulsystems.com/debian stable main
Processes: CPU top: 5 
           1: cpu: 30.2% command: java pid: 490 mem: 318.5 MiB (8.1%) 
           2: cpu: 5.2% command: ./solpiplog pid: 1284 mem: 28.3 MiB (0.7%) 
           3: cpu: 2.1% command: redis-server pid: 589 mem: 4.04 MiB (0.1%) 
           4: cpu: 1.0% command: apache2 pid: 3302 mem: 15.5 MiB (0.3%) 
           5: cpu: 1.0% command: packagekitd pid: 3865 mem: 12.8 MiB (0.3%) 
           Memory top: 5 
           1: mem: 318.5 MiB (8.1%) command: java pid: 490 cpu: 30.2% 
           2: mem: 70.4 MiB (1.8%) command: mysqld pid: 679 cpu: 0.6% 
           3: mem: 58.4 MiB (1.4%) command: xorg pid: 586 cpu: 0.7% 
           4: mem: 49.4 MiB (1.2%) command: lxterminal pid: 2830 cpu: 0.4% 
           5: mem: 29.0 MiB (0.7%) command: lxpanel pid: 1239 cpu: 0.2% 
Info:      Processes: 165 Uptime: 12m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14998 - Brand: AData SU800