Benchmark #15152 - pibenchmarks.com

Brand: SanDisk SDHC (SS32G)
C4
#343 / 1,679
37
#1,462 / 1,679
#286 / 394
863
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-07 10:23:53
#15,152
665
-198 (-29.77%)
Anonymous
SanDisk - Model: SS32G

Secure Digital (SD) Card Details
SanDisk SDHC (SS32G)
C4
29.7G
SD
SanDisk
SS32G
SDHC
3.00
0x03
SD
8.0
07/2015
Class 4
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
1 GB
450 (-50)
100 (+50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
8.2 MB/s
35.78 MB/s
35.08 MB/s
283 IOPS
2,213 IOPS
1,135 KB/s
8,854 KB/s
8,499 KB/s
2,783 KB/s
6,045 KB/s
1,123 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.14.79-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d5f8c6c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 992.7 MiB used: 81.8 MiB (8.2%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.14.79-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::2ee9:ff31:9aca:ab3f/64 scope: link IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::4d5a:929b:f55c:e35d/64 scope: link WAN IP: 87.115.X.X Drives: Local Storage: total: 29.72 GiB used: 1.77 GiB (6.0%) ID-1: /dev/mmcblk0 model: SS32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.68 GiB size: 29.19 GiB (98.37%) used: 1.75 GiB (6.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.0 MiB (51.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9304-D9FD Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 0.5% command: bash pid: 17796 mem: 2.64 MiB (0.2%) 2: cpu: 0.1% command: -bash pid: 17694 mem: 3.98 MiB (0.4%) 3: cpu: 0.1% command: sudo pid: 17792 mem: 3.38 MiB (0.3%) 4: cpu: 0.0% command: init pid: 1 mem: 5.24 MiB (0.5%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 5.65 MiB (0.5%) command: sshd: pid: 17675 cpu: 0.0% 2: mem: 5.24 MiB (0.5%) command: init pid: 1 cpu: 0.0% 3: mem: 5.13 MiB (0.5%) command: systemd pid: 17681 cpu: 0.0% 4: mem: 4.63 MiB (0.4%) command: systemd-journald pid: 96 cpu: 0.0% 5: mem: 4.22 MiB (0.4%) command: sshd pid: 470 cpu: 0.0% Info: Processes: 97 Uptime: 23h 16m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:
  Host: raspberrypi Kernel: 4.14.79-v7+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 
  bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 
  vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 
  console=tty1 root=PARTUUID=d5f8c6c5-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait 
  Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 
  details: BCM2835 rev: a020d3 
Memory:
  RAM: total: 992.7 MiB used: 81.8 MiB (8.2%) gpu: 16.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A 
  bogomips: 358 
  Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 
  3: 1400 4: 1400 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: No display server data found. Headless machine? 
  tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.14.79-v7+ 
Network:
  Device-1: Standard Microsystems type: USB driver: lan78xx 
  bus ID: 1-1.1.1:4 chip ID: 0424:7800 
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v6: fe80::2ee9:ff31:9aca:ab3f/64 scope: link 
  IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v6: fe80::4d5a:929b:f55c:e35d/64 scope: link 
  WAN IP: 87.115.X.X 
Drives:
  Local Storage: total: 29.72 GiB used: 1.77 GiB (6.0%) 
  ID-1: /dev/mmcblk0 model: SS32G size: 29.72 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 29.68 GiB size: 29.19 GiB (98.37%) used: 1.75 GiB (6.0%) 
  fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
  uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc 
  ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) 
  used: 22.0 MiB (51.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 9304-D9FD 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network 
  driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ stretch main ui
Processes:
  CPU top: 5 
  1: cpu: 0.5% command: bash pid: 17796 mem: 2.64 MiB (0.2%) 
  2: cpu: 0.1% command: -bash pid: 17694 mem: 3.98 MiB (0.4%) 
  3: cpu: 0.1% command: sudo pid: 17792 mem: 3.38 MiB (0.3%) 
  4: cpu: 0.0% command: init pid: 1 mem: 5.24 MiB (0.5%) 
  5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 5.65 MiB (0.5%) command: sshd: pid: 17675 cpu: 0.0% 
  2: mem: 5.24 MiB (0.5%) command: init pid: 1 cpu: 0.0% 
  3: mem: 5.13 MiB (0.5%) command: systemd pid: 17681 cpu: 0.0% 
  4: mem: 4.63 MiB (0.4%) command: systemd-journald pid: 96 cpu: 0.0% 
  5: mem: 4.22 MiB (0.4%) command: sshd pid: 470 cpu: 0.0% 
Info:
  Processes: 97 Uptime: 23h 16m Init: systemd v: 232 runlevel: 5 Compilers: 
  gcc: 6.3.0 alt: 6 Shell: Storage.sh (sudo) inxi: 3.0.38

Benchmark #15152 - Brand: SanDisk SDHC (SS32G)