Benchmark #15252 - pibenchmarks.com

Brand: Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
#138 / 1,700
132
#1,119 / 1,700
#27 / 69
#3 / 20
1,862
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.sg

Overview
2020-04-07 16:54:23
#15,252
515
-1,347 (-261.55%)
HitachiHDD
HitachiHDD

Storage Details
Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
500G
HDD
Hitachi
HTS547550A9E384
SATA
2.00
480
152d:2329
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x2329
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
900
250
450 (+50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
23.7 MB/s
24.85 MB/s
24.01 MB/s
174 IOPS
113 IOPS
698 KB/s
454 KB/s
8,403 KB/s
7,869 KB/s
506 KB/s
751 KB/s

inxi Results
System: Host: ChicPlats Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=e447f566-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 Memory: RAM: total: 1002.1 MiB used: 337.1 MiB (33.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-1.2:4 chip ID: 148f:5370 1.0 IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd00:30b7:d4b8:fb62:b54c:4073:78d6:c025/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::6bb6:709d:4b30:e37/64 scope: link WAN IP: 147.253.X.X Drives: Local Storage: total: 480.82 GiB used: 12.39 GiB (2.6%) ID-1: /dev/mmcblk0 model: NCard size: 15.06 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Hitachi model: HTS547550A9E384 family: /HGST Travelstar 5K750 size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5400 rpm rev: JE3O temp: 41 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 287d 6h cycles: 1511 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.51 GiB size: 457.20 GiB (98.22%) used: 6.19 GiB (1.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-4: /media/pi/rootfs raw size: 14.81 GiB size: 14.51 GiB (98.01%) used: 6.10 GiB (42.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 148f:5370 1.0 Device-3: 1-1.5:5 info: JMicron / JMicron USA JM20329 SATA Bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 152d:2329 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 8.4% command: vncserver-x11-core pid: 499 mem: 29.9 MiB (3.2%) 2: cpu: 5.2% command: xorg pid: 583 mem: 59.2 MiB (6.3%) 3: cpu: 3.0% command: init pid: 1 mem: 8.07 MiB (0.8%) 4: cpu: 2.8% command: lxterminal pid: 1009 mem: 48.8 MiB (5.2%) 5: cpu: 1.0% command: [kworker/u8:2-phy0] pid: 1318 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 59.2 MiB (6.3%) command: mysqld pid: 564 cpu: 0.4% 2: mem: 59.2 MiB (6.3%) command: xorg pid: 583 cpu: 5.2% 3: mem: 48.8 MiB (5.2%) command: lxterminal pid: 1009 cpu: 2.8% 4: mem: 29.9 MiB (3.2%) command: vncserver-x11-core pid: 499 cpu: 8.4% 5: mem: 27.8 MiB (3.0%) command: lxpanel pid: 855 cpu: 0.9% Info: Processes: 165 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: bash (sudo) v: 5.0.3 running in: lxterminal inxi: 3.0.38

inxi Results

System:    Host: ChicPlats Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 
           console=tty1 root=PARTUUID=e447f566-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 
Memory:    RAM: total: 1002.1 MiB used: 337.1 MiB (33.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 5 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 
           chip ID: 0424:ec00 
           IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           Device-2: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-1.2:4 chip ID: 148f:5370 1.0 
           IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd00:30b7:d4b8:fb62:b54c:4073:78d6:c025/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::6bb6:709d:4b30:e37/64 scope: link 
           WAN IP: 147.253.X.X 
Drives:    Local Storage: total: 480.82 GiB used: 12.39 GiB (2.6%) 
           ID-1: /dev/mmcblk0 model: NCard size: 15.06 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Hitachi model: HTS547550A9E384 family: /HGST Travelstar 5K750 size: 465.76 GiB 
           block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5400 rpm 
           rev: JE3O temp: 41 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 287d 6h cycles: 1511 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.51 GiB size: 457.20 GiB (98.22%) used: 6.19 GiB (1.4%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-4: /media/pi/rootfs raw size: 14.81 GiB size: 14.51 GiB (98.01%) used: 6.10 GiB (42.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 
           speed: 480 Mb/s chip ID: 148f:5370 1.0 
           Device-3: 1-1.5:5 info: JMicron / JMicron USA JM20329 SATA Bridge type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 152d:2329 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 8.4% command: vncserver-x11-core pid: 499 mem: 29.9 MiB (3.2%) 
           2: cpu: 5.2% command: xorg pid: 583 mem: 59.2 MiB (6.3%) 
           3: cpu: 3.0% command: init pid: 1 mem: 8.07 MiB (0.8%) 
           4: cpu: 2.8% command: lxterminal pid: 1009 mem: 48.8 MiB (5.2%) 
           5: cpu: 1.0% command: [kworker/u8:2-phy0] pid: 1318 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 59.2 MiB (6.3%) command: mysqld pid: 564 cpu: 0.4% 
           2: mem: 59.2 MiB (6.3%) command: xorg pid: 583 cpu: 5.2% 
           3: mem: 48.8 MiB (5.2%) command: lxterminal pid: 1009 cpu: 2.8% 
           4: mem: 29.9 MiB (3.2%) command: vncserver-x11-core pid: 499 cpu: 8.4% 
           5: mem: 27.8 MiB (3.0%) command: lxpanel pid: 855 cpu: 0.9% 
Info:      Processes: 165 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: bash (sudo) v: 5.0.3 running in: lxterminal inxi: 3.0.38

Benchmark #15252 - Brand: Hitachi TravelStar 5400RPM