Benchmark #15416 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
#5 / 1,701
1,256
#1,382 / 1,701
#241 / 405
1,108
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-08 03:29:40
#15,416
1,043
-65 (-6.23%)
Anonymous
SanDisk Ultra A1 32GB on rPi3b

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
29.7G
SD
SanDisk
SC32G
SDHC
5.00
0x03
SD
8.0
09/2017
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
1 GB
450 (-50)
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
14.8 MB/s
21.7 MB/s
21.68 MB/s
883 IOPS
2,461 IOPS
3,532 KB/s
9,846 KB/s
8,039 KB/s
3,342 KB/s
7,409 KB/s
3,031 KB/s

inxi Results
System: Host: raspberrypi2Buero Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 273.1 MiB (27.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbdev alternate: modesetting tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::ba27:ebff:fe73:dfca/64 scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: 10.8.X.X scope: global IP v6: fe80::6dba:a60b:1ed3:a39a/64 virtual: flags 800 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 84.44.X.X Drives: Local Storage: total: 29.72 GiB used: 10.82 GiB (36.4%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.66 GiB size: 29.14 GiB (98.22%) used: 10.80 GiB (37.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: f24a4949-f4b2-4cad-a780-a138695079ec ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 23.6 MiB (42.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 140A-14B7 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.2:4 info: Holtek Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04d9:1503 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi No active apt repos in: /etc/apt/sources.list.d/collabora.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 27.1% command: java pid: 556 mem: 104.9 MiB (11.3%) 2: cpu: 4.0% command: python pid: 759 mem: 11.0 MiB (1.1%) 3: cpu: 1.7% command: init pid: 1 mem: 6.05 MiB (0.6%) 4: cpu: 0.7% command: [kworker/0:1h-mm] pid: 74 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: [kworker/3:1h-kb] pid: 73 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 104.9 MiB (11.3%) command: java pid: 556 cpu: 27.1% 2: mem: 13.5 MiB (1.4%) command: python pid: 773 cpu: 0.1% 3: mem: 11.0 MiB (1.1%) command: python pid: 759 cpu: 4.0% 4: mem: 7.78 MiB (0.8%) command: modemmanager pid: 395 cpu: 0.0% 5: mem: 6.05 MiB (0.6%) command: init pid: 1 cpu: 1.7% Info: Processes: 126 Uptime: 5m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 4.6/4.9/6 Shell: Storage.sh (sudo) inxi: 3.0.38

inxi Results

System:
  Host: raspberrypi2Buero Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 
  bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 
  console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline 
  rootwait 
  Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 
  details: BCM2835 rev: a020d3 
Memory:
  RAM: total: 1002.1 MiB used: 273.1 MiB (27.2%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A 
  bogomips: 358 
  Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 
  3: 1400 4: 1400 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.19.2 driver: fbdev alternate: modesetting 
  tty: 80x24 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.66-v7+ 
Network:
  Device-1: Standard Microsystems type: USB driver: lan78xx 
  bus ID: 1-1.1.1:5 chip ID: 0424:7800 
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v6: fe80::ba27:ebff:fe73:dfca/64 scope: link 
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
  IP v4: 10.8.X.X scope: global 
  IP v6: fe80::6dba:a60b:1ed3:a39a/64 virtual: flags 800 scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 84.44.X.X 
Drives:
  Local Storage: total: 29.72 GiB used: 10.82 GiB (36.4%) 
  ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 29.66 GiB size: 29.14 GiB (98.22%) 
  used: 10.80 GiB (37.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 
  label: N/A uuid: f24a4949-f4b2-4cad-a780-a138695079ec 
  ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) 
  used: 23.6 MiB (42.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 140A-14B7 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network 
  driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
  Device-2: 1-1.2:4 info: Holtek Keyboard type: Keyboard,HID 
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s 
  chip ID: 04d9:1503 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
  No active apt repos in: /etc/apt/sources.list.d/collabora.list 
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ stretch main ui
Processes:
  CPU top: 5 
  1: cpu: 27.1% command: java pid: 556 mem: 104.9 MiB (11.3%) 
  2: cpu: 4.0% command: python pid: 759 mem: 11.0 MiB (1.1%) 
  3: cpu: 1.7% command: init pid: 1 mem: 6.05 MiB (0.6%) 
  4: cpu: 0.7% command: [kworker/0:1h-mm] pid: 74 mem: 0.00 MiB (0.0%) 
  5: cpu: 0.4% command: [kworker/3:1h-kb] pid: 73 mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 104.9 MiB (11.3%) command: java pid: 556 cpu: 27.1% 
  2: mem: 13.5 MiB (1.4%) command: python pid: 773 cpu: 0.1% 
  3: mem: 11.0 MiB (1.1%) command: python pid: 759 cpu: 4.0% 
  4: mem: 7.78 MiB (0.8%) command: modemmanager pid: 395 cpu: 0.0% 
  5: mem: 6.05 MiB (0.6%) command: init pid: 1 cpu: 1.7% 
Info:
  Processes: 126 Uptime: 5m Init: systemd v: 232 runlevel: 3 
  target: multi-user.target Compilers: gcc: 6.3.0 alt: 4.6/4.9/6 
  Shell: Storage.sh (sudo) inxi: 3.0.38

Benchmark #15416 - Brand: SanDisk SD Ultra A1 (SC32G)