Benchmark #15540 - pibenchmarks.com

Brand: OCZ Vertex 2 Series
SSD (2.5" SATA)
#319 / 1,679
43
#768 / 1,679
#740 / 984
#232 / 370
5,619
	Amazon.com AliExpress Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-08 11:44:18
#15,540
5,298
-321 (-6.06%)
mod
test heat off

Storage Details
OCZ Vertex 2 Series
SSD (2.5" SATA)
120G
SSD
OCZ
VERTEX2
Serial
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 8 (jessie)
armv7l

Benchmark Results
102 MB/s
181.2 MB/s
183.29 MB/s
5,002 IOPS
7,644 IOPS
20,009 KB/s
30,578 KB/s
27,465 KB/s
19,181 KB/s
18,239 KB/s
22,523 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=bd065c6c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 8 (jessie) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 608.6 MiB (15.3%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 113x22 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: WAN IP: Drives: Local Storage: total: 119.19 GiB used: 4.62 GiB (3.9%) ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 111.79 GiB block size: physical: 4096 B logical: 512 B rev: 0407 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.73 GiB size: 109.96 GiB (98.42%) used: 4.57 GiB (4.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 8a9074c8-46fe-4807-8dc9-8ab1cb959010 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Unmounted: ID-1: /dev/mmcblk0p2 size: 7.14 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 63.0 MiB fs: vfat label: boot uuid: 70CD-BC89 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Full speed (or root) Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https: //packages.grafana.com/oss/deb stable main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/mosquitto-jessie.list 1: deb http: //repo.mosquitto.org/debian jessie main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_7.x jessie main 2: deb-src https: //deb.nodesource.com/node_7.x jessie main Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ jessie main ui Active apt repos in: /etc/apt/sources.list.d/zulu-embedded.list 1: deb [arch=armhf] http: //repos.azulsystems.com/debian stable main Processes: CPU top: 5 1: cpu: 15.0% command: java pid: 671 mem: 428.9 MiB (10.8%) 2: cpu: 0.4% command: influxd pid: 667 mem: 29.1 MiB (0.7%) 3: cpu: 0.4% command: [kworker/u8:0-ev] pid: 12933 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: bash pid: 13617 mem: 2.70 MiB (0.0%) 5: cpu: 0.2% command: [kworker/2:1-mm_] pid: 13142 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 428.9 MiB (10.8%) command: java pid: 671 cpu: 15.0% 2: mem: 36.6 MiB (0.9%) command: grafana-server pid: 669 cpu: 0.1% 3: mem: 29.1 MiB (0.7%) command: influxd pid: 667 cpu: 0.4% 4: mem: 27.2 MiB (0.6%) command: frontail started by: node pid: 672 cpu: 0.0% 5: mem: 24.1 MiB (0.6%) command: mqttwarn.py started by: python pid: 1118 cpu: 0.0% Info: Processes: 117 Uptime: 2h 45m Init: systemd v: 215 runlevel: 5 Compilers: gcc: 4.9.2 alt: 4.9 Client: shell wrapper v: 4.3.30-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=bd065c6c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 8 (jessie) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 608.6 MiB (15.3%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 113x22 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 119.19 GiB used: 4.62 GiB (3.9%) 
           ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 111.79 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0407 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.73 GiB size: 109.96 GiB (98.42%) used: 4.57 GiB (4.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 8a9074c8-46fe-4807-8dc9-8ab1cb959010 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.14 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 63.0 MiB fs: vfat label: boot uuid: 70CD-BC89 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Full speed (or root) Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/grafana.list 
           1: deb https: //packages.grafana.com/oss/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/mosquitto-jessie.list 
           1: deb http: //repo.mosquitto.org/debian jessie main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_7.x jessie main
           2: deb-src https: //deb.nodesource.com/node_7.x jessie main
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ jessie main ui
           Active apt repos in: /etc/apt/sources.list.d/zulu-embedded.list 
           1: deb [arch=armhf] http: //repos.azulsystems.com/debian stable main
Processes: CPU top: 5 
           1: cpu: 15.0% command: java pid: 671 mem: 428.9 MiB (10.8%) 
           2: cpu: 0.4% command: influxd pid: 667 mem: 29.1 MiB (0.7%) 
           3: cpu: 0.4% command: [kworker/u8:0-ev] pid: 12933 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: bash pid: 13617 mem: 2.70 MiB (0.0%) 
           5: cpu: 0.2% command: [kworker/2:1-mm_] pid: 13142 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 428.9 MiB (10.8%) command: java pid: 671 cpu: 15.0% 
           2: mem: 36.6 MiB (0.9%) command: grafana-server pid: 669 cpu: 0.1% 
           3: mem: 29.1 MiB (0.7%) command: influxd pid: 667 cpu: 0.4% 
           4: mem: 27.2 MiB (0.6%) command: frontail started by: node pid: 672 cpu: 0.0% 
           5: mem: 24.1 MiB (0.6%) command: mqttwarn.py started by: python pid: 1118 cpu: 0.0% 
Info:      Processes: 117 Uptime: 2h 45m Init: systemd v: 215 runlevel: 5 Compilers: gcc: 4.9.2 
           alt: 4.9 Client: shell wrapper v: 4.3.30-release inxi: 3.0.38

Benchmark #15540 - Brand: OCZ Vertex 2 Series