Benchmark #15582 - pibenchmarks.com

Brand: TCSUNBOW M3 Series
SSD (mSATA)
#529 / 1,539
10
#778 / 1,539
#742 / 875
#47 / 69
4,593
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-04-08 13:43:02
#15,582
2,537
-2,056 (-81.04%)
Anonymous

Storage Details
TCSUNBOW M3 Series
SSD (mSATA)
60G
SSD
TCSUNBOW
M360GB
2.5 inch
SATA
2.10
480
0850:0003
0x0850 (Fast Point Technologies, Inc.)
0x0003 (Laser Printer)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
29.7 MB/s
29.4 MB/s
29.22 MB/s
2,781 IOPS
2,756 IOPS
11,125 KB/s
11,024 KB/s
14,294 KB/s
13,120 KB/s
11,118 KB/s
11,333 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7f3ba456-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 991.6 MiB used: 167.9 MiB (16.9%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 300 MHz min/max: 300/1400 MHz Core speeds (MHz): 1: 300 2: 300 3: 300 4: 300 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 162x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: veth78f6f92 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Drives: Local Storage: total: 55.90 GiB used: 8.03 GiB (14.4%) ID-1: /dev/sda type: USB vendor: TCSunBow model: M3 60GB size: 55.90 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 55.85 GiB size: 55.00 GiB (98.48%) used: 4.01 GiB (7.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 ID-2: /boot raw size: 42.9 MiB size: 42.2 MiB (98.43%) used: 23.7 MiB (56.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 16D2-035F ID-3: /mnt/dietpi_userdata/docker-data/overlay2/2c40acf5ce0f20d74052ba263e9da18fa7ba80a4ac2aeca5826b957527f892c4/merged raw size: N/A size: 55.00 GiB used: 4.01 GiB (7.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.2:5 info: Fast Point type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0850:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 4.4% command: [kworker/2:2-eve] pid: 9566 mem: 0.00 MiB (0.0%) 2: cpu: 2.9% command: [kworker/2:1-eve] pid: 8061 mem: 0.00 MiB (0.0%) 3: cpu: 2.4% command: [kworker/2:3-eve] pid: 9835 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: sshd: pid: 10031 mem: 5.63 MiB (0.5%) 5: cpu: 0.2% command: sshd: pid: 10036 mem: 5.40 MiB (0.5%) Memory top: 5 1: mem: 60.8 MiB (6.2%) command: dockerd pid: 578 cpu: 0.0% 2: mem: 31.6 MiB (3.2%) command: containerd pid: 577 cpu: 0.0% 3: mem: 28.0 MiB (2.8%) command: fail2ban-server started by: python3 pid: 700 cpu: 0.0% 4: mem: 5.94 MiB (0.6%) command: init pid: 1 cpu: 0.0% 5: mem: 5.79 MiB (0.5%) command: systemd-journald pid: 102 cpu: 0.0% Info: Processes: 103 Uptime: 10d 2h 18m Init: systemd v: 232 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=720 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=7f3ba456-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 991.6 MiB used: 167.9 MiB (16.9%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 300 MHz min/max: 300/1400 MHz Core speeds (MHz): 1: 300 2: 300 3: 300 4: 300 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 162x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: veth78f6f92 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Drives:    Local Storage: total: 55.90 GiB used: 8.03 GiB (14.4%) 
           ID-1: /dev/sda type: USB vendor: TCSunBow model: M3 60GB size: 55.90 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 55.85 GiB size: 55.00 GiB (98.48%) used: 4.01 GiB (7.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 
           ID-2: /boot raw size: 42.9 MiB size: 42.2 MiB (98.43%) used: 23.7 MiB (56.2%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 16D2-035F 
           ID-3: /mnt/dietpi_userdata/docker-data/overlay2/2c40acf5ce0f20d74052ba263e9da18fa7ba80a4ac2aeca5826b957527f892c4/merged raw size: N/A size: 55.00 GiB used: 4.01 GiB (7.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.2:5 info: Fast Point type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 0850:0003 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 4.4% command: [kworker/2:2-eve] pid: 9566 mem: 0.00 MiB (0.0%) 
           2: cpu: 2.9% command: [kworker/2:1-eve] pid: 8061 mem: 0.00 MiB (0.0%) 
           3: cpu: 2.4% command: [kworker/2:3-eve] pid: 9835 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.6% command: sshd: pid: 10031 mem: 5.63 MiB (0.5%) 
           5: cpu: 0.2% command: sshd: pid: 10036 mem: 5.40 MiB (0.5%) 
           Memory top: 5 
           1: mem: 60.8 MiB (6.2%) command: dockerd pid: 578 cpu: 0.0% 
           2: mem: 31.6 MiB (3.2%) command: containerd pid: 577 cpu: 0.0% 
           3: mem: 28.0 MiB (2.8%) command: fail2ban-server started by: python3 pid: 700 cpu: 0.0% 
           4: mem: 5.94 MiB (0.6%) command: init pid: 1 cpu: 0.0% 
           5: mem: 5.79 MiB (0.5%) command: systemd-journald pid: 102 cpu: 0.0% 
Info:      Processes: 103 Uptime: 10d 2h 18m Init: systemd v: 232 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #15582 - Brand: TCSUNBOW M3 Series