Benchmark #15584 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#107 / 1,679
170
#679 / 1,679
#656 / 984
#25 / 69
6,097
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-08 13:44:57
#15,584
3,308
-2,789 (-84.31%)
Anonymous

Storage Details
Transcend MSA Series
SSD (mSATA)
32G
SSD
Transcend
TS32GMSA370
SATA
2.10
480
045b:0229
0x045b (Hitachi, Ltd)
0x0229
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
35 MB/s
29.6 MB/s
28.51 MB/s
3,952 IOPS
3,295 IOPS
15,811 KB/s
13,181 KB/s
15,991 KB/s
15,483 KB/s
12,790 KB/s
15,965 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.0 MiB used: 187.5 MiB (18.7%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: N/A tty: 162x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: hifiberry-dacplus driver: snd_rpi_hifiberry_dacplus bus ID: N/A chip ID: hifiberry:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:6 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: WAN IP: Drives: Local Storage: total: 88.04 GiB used: 11.50 GiB (13.1%) ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Fit size: 58.23 GiB block size: physical: 512 B logical: 512 B rev: 1.27 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb type: USB vendor: Transcend model: TS32GMSA 370 size: 29.82 GiB block size: physical: 512 B logical: 512 B rev: P122 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.77 GiB size: 29.29 GiB (98.37%) used: 2.42 GiB (8.3%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: rootfs uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: 9304-D9FD ID-3: /media/USBSTICK raw size: 58.22 GiB size: 58.22 GiB (100.00%) used: 9.05 GiB (15.5%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: USBSTICK uuid: 227A2A5C7A2A2D4B Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:5 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Device-3: 1-1.3:4 info: SanDisk Cruzer Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0781:5571 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 5.5% command: [kworker/3:3-cgr] pid: 4026 mem: 0.00 MiB (0.0%) 2: cpu: 4.1% command: [kworker/3:1-mm_] pid: 4765 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: worker.php started by: php pid: 537 mem: 12.0 MiB (1.2%) 4: cpu: 0.2% command: avahi-daemon: pid: 7814 mem: 2.75 MiB (0.2%) 5: cpu: 0.1% command: sshd: pid: 6037 mem: 5.59 MiB (0.5%) Memory top: 5 1: mem: 28.9 MiB (3.0%) command: php-fpm: pid: 476 cpu: 0.0% 2: mem: 19.4 MiB (2.0%) command: mpd pid: 942 cpu: 0.0% 3: mem: 13.9 MiB (1.4%) command: smbd pid: 618 cpu: 0.0% 4: mem: 12.8 MiB (1.3%) command: fail2ban-server started by: python3 pid: 626 cpu: 0.0% 5: mem: 12.0 MiB (1.2%) command: worker.php started by: php pid: 537 cpu: 0.2% Info: Processes: 138 Uptime: 13d 2h 31m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 
           console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.0 MiB used: 187.5 MiB (18.7%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: N/A tty: 162x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: hifiberry-dacplus driver: snd_rpi_hifiberry_dacplus bus ID: N/A 
           chip ID: hifiberry:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:6 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 88.04 GiB used: 11.50 GiB (13.1%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Fit size: 58.23 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.27 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-2: /dev/sdb type: USB vendor: Transcend model: TS32GMSA 370 size: 29.82 GiB 
           block size: physical: 512 B logical: 512 B rev: P122 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.77 GiB size: 29.29 GiB (98.37%) used: 2.42 GiB (8.3%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: rootfs 
           uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc 
           ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat 
           block size: 512 B dev: /dev/sdb1 label: boot uuid: 9304-D9FD 
           ID-3: /media/USBSTICK raw size: 58.22 GiB size: 58.22 GiB (100.00%) 
           used: 9.05 GiB (15.5%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: USBSTICK 
           uuid: 227A2A5C7A2A2D4B 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:5 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 
           Device-3: 1-1.3:4 info: SanDisk Cruzer Fit type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0781:5571 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 5.5% command: [kworker/3:3-cgr] pid: 4026 mem: 0.00 MiB (0.0%) 
           2: cpu: 4.1% command: [kworker/3:1-mm_] pid: 4765 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.2% command: worker.php started by: php pid: 537 mem: 12.0 MiB (1.2%) 
           4: cpu: 0.2% command: avahi-daemon: pid: 7814 mem: 2.75 MiB (0.2%) 
           5: cpu: 0.1% command: sshd: pid: 6037 mem: 5.59 MiB (0.5%) 
           Memory top: 5 
           1: mem: 28.9 MiB (3.0%) command: php-fpm: pid: 476 cpu: 0.0% 
           2: mem: 19.4 MiB (2.0%) command: mpd pid: 942 cpu: 0.0% 
           3: mem: 13.9 MiB (1.4%) command: smbd pid: 618 cpu: 0.0% 
           4: mem: 12.8 MiB (1.3%) command: fail2ban-server started by: python3 pid: 626 cpu: 0.0% 
           5: mem: 12.0 MiB (1.2%) command: worker.php started by: php pid: 537 cpu: 0.2% 
Info:      Processes: 138 Uptime: 13d 2h 31m Init: systemd v: 232 runlevel: 3 
           target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper 
           v: 4.4.12-release inxi: 3.0.38

Benchmark #15584 - Brand: Transcend MSA Series