Benchmark #15601 - pibenchmarks.com

Brand: SanDisk SD Extreme (SE32G)
C0
#233 / 1,701
72
#1,244 / 1,701
#127 / 405
1,407
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-08 14:05:48
#15,601
1,089
-318 (-29.20%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme (SE32G)
C0
29.4G
SD
SanDisk
SE32G
SDHC
5.00
0x03
SD
8.0
08/2019
None
None
None

System Board Details
1,608

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
20.3 MB/s
18.49 MB/s
18.49 MB/s
1,036 IOPS
2,281 IOPS
4,144 KB/s
9,126 KB/s
6,360 KB/s
2,996 KB/s
6,016 KB/s
3,555 KB/s

inxi Results
System: Kernel: 3.4.39-BPI-M3-Kernel armv7l bits: 32 compiler: gcc v: 4.6.3 parameters: board=bpi-m3 console=ttyS0,115200 console=tty1 service=linux root=/dev/mmcblk0p2 rootfstype=ext4 rootwait bootmenutimeout=10 datadev=mmcblk0p2 enforcing=1 initcall_debug=0 loglevel=8 init=/init vmalloc=384M ion_cma_list=120m,176m,512m panic=10 disp.screen0_output_type=3 disp.screen0_output_mode=5 disp.screen1_output_type=3 disp.screen1_output_mode=5 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: sun8i rev: N/A Battery: ID-1: battery charge: 100% condition: N/A/0.0 Wh volts: N/A/0.0 model: battery type: LiFe N/A status: Full Memory: RAM: total: 1.96 GiB used: 427.1 MiB (21.3%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: 8-Core (2-Die) model: ARMv7 v7l bits: 32 type: MCP MCM arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 38400 Speed: 1008 MHz min/max: 480/1800 MHz Core speeds (MHz): 1: 1008 2: 1008 3: 1008 4: 1008 5: 1008 6: 1008 7: 1008 8: 1008 Features: edsp fastmult half idiva idivt neon swp thumb thumbee tls vfp vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Message: No ARM data found for this feature. Display: server: X.org 1.19.2 driver: fbturbo tty: 162x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Message: No ARM data found for this feature. Device-1: snddaudio driver: snddaudio message: bus/chip ids unavailable Device-2: sndhdmi driver: sndhdmi v: kernel message: bus/chip ids unavailable Sound Server: ALSA v: 1.0.25 Network: Message: No ARM data found for this feature. IF-ID-1: bond0 state: down mac: IF-ID-2: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: tunl0 state: down mac: IF-ID-5: wlan0 state: dormant mac: IP v6: scope: link WAN IP: Drives: Local Storage: total: 269.89 GiB used: 10.48 GiB (3.9%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/mmcblk1 model: 8WPD3R size: 7.28 GiB block size: physical: 512 B logical: 512 B rev: 7 scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-3: /dev/sdb type: USB vendor: Seagate model: ST9250315AS family: Momentus 5400.6 size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5400 rpm rev: 0001SDM1 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 298d 16h cycles: 113 Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.38 GiB size: 28.92 GiB (98.45%) used: 7.14 GiB (24.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: BPI-ROOT uuid: 5c95995b-1e25-4481-8882-12bc18d8c26f ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 36.2 MiB (14.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BPI-BOOT uuid: A8B9-6E21 ID-3: /home//USBDisk raw size: 232.88 GiB size: 232.88 GiB (100.00%) used: 3.31 GiB (1.4%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: USBDisk uuid: 0202515C025155AF ID-4: /home/shares/USBDisk raw size: 232.88 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ntfs dev: /dev/sdb1 label: USBDisk uuid: 0202515C025155AF Unmounted: ID-1: /dev/mmcblk1boot0 size: 4.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/mmcblk1boot1 size: 4.0 MiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk1p1 size: 256.0 MiB fs: vfat label: BPI-BOOT uuid: A8B9-6E21 ID-4: /dev/mmcblk1p2 size: 6.93 GiB fs: ext4 label: BPI-ROOT uuid: 5c95995b-1e25-4481-8882-12bc18d8c26f USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-1: 1-1.1:3 info: Genesys Logic IDE/SATA Adapter type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0718 Hub: 1-1.3:4 info: Transcend Information RDF8 ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 8564:4000 Device-2: 1-1.3.3:5 info: JMicron / JMicron USA JM20329 SATA Bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 152d:2329 Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x stretch main 2: deb-src https: //deb.nodesource.com/node_10.x stretch main Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 22.6% command: java pid: 824 mem: 214.5 MiB (10.6%) 2: cpu: 4.3% command: iobroker.js-controller pid: 819 mem: 33.7 MiB (1.6%) 3: cpu: 2.8% command: init pid: 1 mem: 5.26 MiB (0.2%) 4: cpu: 2.4% command: io.info.0 pid: 1503 mem: 32.1 MiB (1.5%) 5: cpu: 2.3% command: io.admin.0 pid: 1392 mem: 41.7 MiB (2.0%) Memory top: 5 1: mem: 214.5 MiB (10.6%) command: java pid: 824 cpu: 22.6% 2: mem: 41.7 MiB (2.0%) command: io.admin.0 pid: 1392 cpu: 2.3% 3: mem: 33.7 MiB (1.6%) command: iobroker.js-controller pid: 819 cpu: 4.3% 4: mem: 32.5 MiB (1.6%) command: io.web.0 pid: 1564 cpu: 2.1% 5: mem: 32.1 MiB (1.5%) command: io.info.0 pid: 1503 cpu: 2.4% Info: Processes: 171 Uptime: 10m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 4.9/6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 3.4.39-BPI-M3-Kernel armv7l bits: 32 compiler: gcc v: 4.6.3 
           parameters: board=bpi-m3 console=ttyS0,115200 console=tty1 service=linux 
           root=/dev/mmcblk0p2 rootfstype=ext4 rootwait bootmenutimeout=10 datadev=mmcblk0p2 
           enforcing=1 initcall_debug=0 loglevel=8 init=/init vmalloc=384M 
           ion_cma_list=120m,176m,512m panic=10 disp.screen0_output_type=3 
           disp.screen0_output_mode=5 disp.screen1_output_type=3 disp.screen1_output_mode=5 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: sun8i rev: N/A Battery:   ID-1: battery charge: 100% condition: N/A/0.0 Wh volts: N/A/0.0 model: battery 
           type: LiFe N/A status: Full 
Memory:    RAM: total: 1.96 GiB used: 427.1 MiB (21.3%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: 8-Core (2-Die) model: ARMv7 v7l bits: 32 type: MCP MCM arch: v7l family: 7 
           model-id: N/A stepping: 5 microcode: N/A bogomips: 38400 
           Speed: 1008 MHz min/max: 480/1800 MHz Core speeds (MHz): 1: 1008 2: 1008 3: 1008 
           4: 1008 5: 1008 6: 1008 7: 1008 8: 1008 
           Features: edsp fastmult half idiva idivt neon swp thumb thumbee tls vfp vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Message: No ARM data found for this feature. 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 162x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Message: No ARM data found for this feature. 
           Device-1: snddaudio driver: snddaudio message: bus/chip ids unavailable 
           Device-2: sndhdmi driver: sndhdmi v: kernel message: bus/chip ids unavailable 
           Sound Server: ALSA v: 1.0.25 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: bond0 state: down mac:  
           IF-ID-2: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A 
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: tunl0 state: down mac:  
           IF-ID-5: wlan0 state: dormant mac:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 269.89 GiB used: 10.48 GiB (3.9%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/mmcblk1 model: 8WPD3R size: 7.28 GiB block size: physical: 512 B 
           logical: 512 B rev: 7 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-3: /dev/sdb type: USB vendor: Seagate model: ST9250315AS family: Momentus 5400.6 
           size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s 
           rotation: 5400 rpm rev: 0001SDM1 temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 298d 16h cycles: 113 Pre-Fail: 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.38 GiB size: 28.92 GiB (98.45%) used: 7.14 GiB (24.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: BPI-ROOT 
           uuid: 5c95995b-1e25-4481-8882-12bc18d8c26f 
           ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 36.2 MiB (14.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BPI-BOOT uuid: A8B9-6E21 
           ID-3: /home//USBDisk raw size: 232.88 GiB size: 232.88 GiB (100.00%) 
           used: 3.31 GiB (1.4%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: USBDisk 
           uuid: 0202515C025155AF 
           ID-4: /home/shares/USBDisk raw size: 232.88 GiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: ntfs dev: /dev/sdb1 label: USBDisk uuid: 0202515C025155AF 
Unmounted: ID-1: /dev/mmcblk1boot0 size: 4.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/mmcblk1boot1 size: 4.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk1p1 size: 256.0 MiB fs: vfat label: BPI-BOOT uuid: A8B9-6E21 
           ID-4: /dev/mmcblk1p2 size: 6.93 GiB fs: ext4 label: BPI-ROOT 
           uuid: 5c95995b-1e25-4481-8882-12bc18d8c26f 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Device-1: 1-1.1:3 info: Genesys Logic IDE/SATA Adapter type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0718 
           Hub: 1-1.3:4 info: Transcend Information RDF8 ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 8564:4000 
           Device-2: 1-1.3.3:5 info: JMicron / JMicron USA JM20329 SATA Bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 152d:2329 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x stretch main
           2: deb-src https: //deb.nodesource.com/node_10.x stretch main
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 22.6% command: java pid: 824 mem: 214.5 MiB (10.6%) 
           2: cpu: 4.3% command: iobroker.js-controller pid: 819 mem: 33.7 MiB (1.6%) 
           3: cpu: 2.8% command: init pid: 1 mem: 5.26 MiB (0.2%) 
           4: cpu: 2.4% command: io.info.0 pid: 1503 mem: 32.1 MiB (1.5%) 
           5: cpu: 2.3% command: io.admin.0 pid: 1392 mem: 41.7 MiB (2.0%) 
           Memory top: 5 
           1: mem: 214.5 MiB (10.6%) command: java pid: 824 cpu: 22.6% 
           2: mem: 41.7 MiB (2.0%) command: io.admin.0 pid: 1392 cpu: 2.3% 
           3: mem: 33.7 MiB (1.6%) command: iobroker.js-controller pid: 819 cpu: 4.3% 
           4: mem: 32.5 MiB (1.6%) command: io.web.0 pid: 1564 cpu: 2.1% 
           5: mem: 32.1 MiB (1.5%) command: io.info.0 pid: 1503 cpu: 2.4% 
Info:      Processes: 171 Uptime: 10m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 4.9/6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #15601 - Brand: SanDisk SD Extreme (SE32G)