Benchmark #15805 - pibenchmarks.com

Brand: Steelram FS200 USB pSSD
SSD (Portable)
#329 / 1,665
33
#1,395 / 1,665
#972 / 977
#140 / 144
1,014
	AliExpress

Overview
2020-04-09 03:09:59
#15,805
613
-401 (-65.42%)
Anonymous

Storage Details
Steelram FS200 USB pSSD
SSD (Portable)
58.8G
SSD
Steelram
SteelRamA01
2.10
480
2109:0a01
0x2109
0x0a01 (USB Headset)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
12.8 MB/s
33.52 MB/s
33.03 MB/s
189 IOPS
1,370 IOPS
756 KB/s
5,481 KB/s
15,893 KB/s
1,736 KB/s
4,093 KB/s
765 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 147.0 MiB (7.3%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 175x42 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 88.72 GiB used: 1.37 GiB (1.5%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.75 GiB size: 57.81 GiB (98.41%) used: 1.32 GiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.3.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 Device-2: 1-1.3.4:6 info: MosArt type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 062a:6728 Device-3: 1-1.4:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 7788:0a01 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.4% command: systemd pid: 1 mem: 8.23 MiB (0.4%) 2: cpu: 0.4% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: dbus-daemon pid: 340 mem: 3.38 MiB (0.1%) 4: cpu: 0.1% command: avahi-daemon: pid: 357 mem: 3.04 MiB (0.1%) 5: cpu: 0.1% command: bash pid: 2881 mem: 2.84 MiB (0.1%) Memory top: 5 1: mem: 8.23 MiB (0.4%) command: systemd pid: 1 cpu: 1.4% 2: mem: 6.62 MiB (0.3%) command: systemd-journald pid: 1623 cpu: 0.0% 3: mem: 6.47 MiB (0.3%) command: systemd pid: 592 cpu: 0.0% 4: mem: 6.07 MiB (0.3%) command: sshd: pid: 584 cpu: 0.0% 5: mem: 5.77 MiB (0.2%) command: systemd-logind pid: 335 cpu: 0.0% Info: Processes: 141 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 147.0 MiB (7.3%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 175x42 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 88.72 GiB used: 1.37 GiB (1.5%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB 
           block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.75 GiB size: 57.81 GiB (98.41%) used: 1.32 GiB (2.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.3.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 
           Device-2: 1-1.3.4:6 info: MosArt type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 12 Mb/s chip ID: 062a:6728 
           Device-3: 1-1.4:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 7788:0a01 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.4% command: systemd pid: 1 mem: 8.23 MiB (0.4%) 
           2: cpu: 0.4% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: dbus-daemon pid: 340 mem: 3.38 MiB (0.1%) 
           4: cpu: 0.1% command: avahi-daemon: pid: 357 mem: 3.04 MiB (0.1%) 
           5: cpu: 0.1% command: bash pid: 2881 mem: 2.84 MiB (0.1%) 
           Memory top: 5 
           1: mem: 8.23 MiB (0.4%) command: systemd pid: 1 cpu: 1.4% 
           2: mem: 6.62 MiB (0.3%) command: systemd-journald pid: 1623 cpu: 0.0% 
           3: mem: 6.47 MiB (0.3%) command: systemd pid: 592 cpu: 0.0% 
           4: mem: 6.07 MiB (0.3%) command: sshd: pid: 584 cpu: 0.0% 
           5: mem: 5.77 MiB (0.2%) command: systemd-logind pid: 335 cpu: 0.0% 
Info:      Processes: 141 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #15805 - Brand: Steelram FS200 USB pSSD