Benchmark #15816 - pibenchmarks.com

Brand: Crucial MX500 Series
SSD (2.5" SATA)
#27 / 1,679
528
#526 / 1,679
#506 / 984
#95 / 370
6,936
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-09 03:54:19
#15,816
9,348
+2,412 (+25.80%)
JohnLiu
Micron Crucial MX500 2.5-inch SATA SSD on Pi 4 using ELUTENG SATA to USB adapter

Storage Details
Crucial MX500 Series
SSD (2.5" SATA)
500G
SSD
Crucial
CT500MX500SSD1
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

Arch Linux ARM
armv7l

Benchmark Results
201 MB/s
301.02 MB/s
280.69 MB/s
15,081 IOPS
28,967 IOPS
60,324 KB/s
115,869 KB/s
31,982 KB/s
25,219 KB/s
22,040 KB/s
31,697 KB/s

inxi Results
System: Host: alarmpi Kernel: 4.19.113-1-ARCH armv7l bits: 32 compiler: gcc v: 9.2.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=PARTUUID=405dff09-01 rw rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 elevator=noop Console: N/A dm: N/A Distro: Arch Linux ARM Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 225.3 MiB (5.7%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.113-1-ARCH Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fe6c:c2a3/64 scope: link WAN IP: 111.250.X.X Drives: Local Storage: total: 469.40 GiB used: 1.79 GiB (0.4%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/mmcblk0 model: SA04G size: 3.64 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB block size: physical: 4096 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 1.75 GiB (0.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 7b46b662-d082-4061-ac4f-7375465f7c13 ID-2: /boot raw size: 100.0 MiB size: 99.8 MiB (99.79%) used: 38.6 MiB (38.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 1F98-A98B Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: http://tw.mirror.archlinuxarm.org/$arch/$repo 2: http://mirror.archlinuxarm.org/$arch/$repo Processes: CPU top: 5 1: cpu: 0.3% command: init pid: 1 mem: 8.60 MiB (0.2%) 2: cpu: 0.3% command: [kworker/u8:2-events_unbound] pid: 500 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: bash pid: 7344 mem: 2.26 MiB (0.0%) 4: cpu: 0.1% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 7 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: su pid: 7332 mem: 3.68 MiB (0.0%) Memory top: 5 1: mem: 13.4 MiB (0.3%) command: systemd-journald pid: 221 cpu: 0.0% 2: mem: 12.1 MiB (0.3%) command: systemd-resolved pid: 278 cpu: 0.0% 3: mem: 10.6 MiB (0.2%) command: dirmngr pid: 4443 cpu: 0.0% 4: mem: 8.60 MiB (0.2%) command: init pid: 1 cpu: 0.3% 5: mem: 7.49 MiB (0.1%) command: systemd pid: 294 cpu: 0.0% Info: Processes: 126 Uptime: 32m Init: systemd v: 245 Compilers: gcc: 9.2.0 Shell: bash v: 5.0.16 inxi: 3.0.38

inxi Results

System:
  Host: alarmpi Kernel: 4.19.113-1-ARCH armv7l bits: 32 compiler: gcc 
  v: 9.2.0 
  parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
  bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 root=PARTUUID=405dff09-01 rw rootwait 
  console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 
  smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 
  elevator=noop 
  Console: N/A dm: N/A Distro: Arch Linux ARM 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.88 GiB used: 225.3 MiB (5.7%) gpu: 64.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 432 
  Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 
  3: 600 4: 600 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: No display server data found. Headless machine? 
  tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.113-1-ARCH 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
  IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v6: fe80::dea6:32ff:fe6c:c2a3/64 scope: link 
  WAN IP: 111.250.X.X 
Drives:
  Local Storage: total: 469.40 GiB used: 1.79 GiB (0.4%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/mmcblk0 model: SA04G size: 3.64 GiB block size: physical: 512 B 
  logical: 512 B scheme: MBR 
  ID-2: /dev/sda type: USB vendor: Crucial model: CT500MX500SSD1 
  size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
  scheme: MBR 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 465.76 GiB size: 457.45 GiB (98.22%) 
  used: 1.75 GiB (0.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 
  label: N/A uuid: 7b46b662-d082-4061-ac4f-7375465f7c13 
  ID-2: /boot raw size: 100.0 MiB size: 99.8 MiB (99.79%) 
  used: 38.6 MiB (38.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: N/A uuid: 1F98-A98B 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E 
  SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
  type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
  chip ID: 174c:55aa 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active pacman repo servers in: /etc/pacman.d/mirrorlist 
  1: http://tw.mirror.archlinuxarm.org/$arch/$repo
  2: http://mirror.archlinuxarm.org/$arch/$repo
Processes:
  CPU top: 5 
  1: cpu: 0.3% command: init pid: 1 mem: 8.60 MiB (0.2%) 
  2: cpu: 0.3% command: [kworker/u8:2-events_unbound] pid: 500 
  mem: 0.00 MiB (0.0%) 
  3: cpu: 0.3% command: bash pid: 7344 mem: 2.26 MiB (0.0%) 
  4: cpu: 0.1% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 7 
  mem: 0.00 MiB (0.0%) 
  5: cpu: 0.1% command: su pid: 7332 mem: 3.68 MiB (0.0%) 
  Memory top: 5 
  1: mem: 13.4 MiB (0.3%) command: systemd-journald pid: 221 cpu: 0.0% 
  2: mem: 12.1 MiB (0.3%) command: systemd-resolved pid: 278 cpu: 0.0% 
  3: mem: 10.6 MiB (0.2%) command: dirmngr pid: 4443 cpu: 0.0% 
  4: mem: 8.60 MiB (0.2%) command: init pid: 1 cpu: 0.3% 
  5: mem: 7.49 MiB (0.1%) command: systemd pid: 294 cpu: 0.0% 
Info:
  Processes: 126 Uptime: 32m Init: systemd v: 245 Compilers: gcc: 9.2.0 
  Shell: bash v: 5.0.16 inxi: 3.0.38

Benchmark #15816 - Brand: Crucial MX500 Series