Benchmark #15942 - pibenchmarks.com

Brand: Samsung eMMC (8GTF4)
MMC (Embedded)
#159 / 1,672
91
#888 / 1,672
#29 / 75
#29 / 92
4,647

Overview
2020-04-09 10:12:09
#15,942
3,261
-1,386 (-42.50%)
OPi
Orange Pi 3 H6

Storage Details
Samsung eMMC (8GTF4)
MMC (Embedded)
7.2G
MMC
Samsung
8GTF4
Embedded
None

System Board Details
		Amazon.com AliExpress
Orange Pi 3
OrangePi 3
Xunlong

Operating System

Debian GNU/Linux 9 (stretch)
aarch64

Benchmark Results
39.8 MB/s
43.02 MB/s
42.96 MB/s
3,537 IOPS
4,222 IOPS
14,148 KB/s
16,890 KB/s
16,736 KB/s
13,769 KB/s
16,525 KB/s
13,735 KB/s

inxi Results
System: Kernel: 5.3.5-g4060d9507 aarch64 bits: 64 compiler: gcc v: 7.4.1 parameters: root=LABEL=rootfs rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 panic=10 consoleblank=0 loglevel=1 ubootpart= usb-storage.quirks= Console: tty 0 dm: N/A Distro: Debian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: OrangePi 3 details: N/A Memory: RAM: total: 1.95 GiB used: 425.6 MiB (21.3%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: N/A min/max: N/A Core speeds (MHz): No speed data found for 4 cores. Features: aes asimd cpuid crc32 evtstrm fp pmull sha1 sha2 Vulnerabilities: Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Not affected Graphics: Device-1: mali-t720 driver: N/A bus ID: N/A chip ID: arm:1800000 Device-2: sun50i-h6-dw-hdmi driver: sun8i_dw_hdmi v: N/A bus ID: N/A chip ID: allwinner:6000000 Device-3: sun50i-h6-display-engine driver: sun4i_drm v: N/A bus ID: N/A chip ID: allwinner:display-engine Display: server: No display server data found. Headless machine? tty: 157x43 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: sun50i-h6-dw-hdmi driver: sun8i_dw_hdmi bus ID: N/A chip ID: allwinner:6000000 Device-2: simple-audio-card driver: asoc_simple_card bus ID: N/A chip ID: simple-audio-card:sound Sound Server: ALSA v: k5.3.5-g4060d9507 Network: Device-1: sun50i-h6-emac driver: dwmac_sun8i v: kernel port: N/A bus ID: N/A chip ID: allwinner:5020000 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v6: scope: link Device-2: regulator-fixed driver: reg_fixed_voltage v: N/A port: N/A bus ID: N/A chip ID: regulator-fixed:vcc-wifi-io Device-3: regulator-fixed driver: reg_fixed_voltage v: N/A port: N/A bus ID: N/A chip ID: regulator-fixed:vcc33-wifi Device-4: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus ID: N/A chip ID: mmc-pwrseq-simple:wifi-pwrseq IF-ID-1: eth0.1 state: up speed: 1000 Mbps duplex: full mac: IF-ID-2: eth0.10 state: up speed: 1000 Mbps duplex: full mac: IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 7.28 GiB used: 1.72 GiB (23.6%) ID-1: /dev/mmcblk2 model: 8GTF4R size: 7.28 GiB block size: physical: 512 B logical: 512 B rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.20 GiB size: 7.02 GiB (97.56%) used: 1.69 GiB (24.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk2p2 label: rootfs uuid: 4e871a59-3f3a-4c08-8fa7-1741467f17b8 ID-2: /boot raw size: 64.0 MiB size: 63.9 MiB (99.78%) used: 25.9 MiB (40.5%) fs: vfat block size: 512 B dev: /dev/mmcblk2p1 label: BOOT uuid: 6104-9E4B Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 3-1:2 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 5-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 6-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 7-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ftp.cn.debian.org/debian stretch main contrib non-free 2: deb http: //ftp.cn.debian.org/debian stretch-updates main contrib non-free 3: deb http: //security.debian.org/ stretch/updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x stretch main 2: deb-src https: //deb.nodesource.com/node_10.x stretch main Processes: CPU top: 5 1: cpu: 0.3% command: sshd: pid: 24387 mem: 6.01 MiB (0.3%) 2: cpu: 0.1% command: systemd pid: 24389 mem: 5.41 MiB (0.2%) 3: cpu: 0.1% command: bash pid: 24403 mem: 2.21 MiB (0.1%) 4: cpu: 0.1% command: [kworker/1:0h-kb] pid: 24763 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: init pid: 1 mem: 6.40 MiB (0.3%) Memory top: 5 1: mem: 295.8 MiB (14.8%) command: named pid: 1797 cpu: 0.0% 2: mem: 16.4 MiB (0.8%) command: networkmanager pid: 1630 cpu: 0.0% 3: mem: 11.5 MiB (0.5%) command: dhcpd pid: 1876 cpu: 0.0% 4: mem: 8.45 MiB (0.4%) command: modemmanager pid: 1620 cpu: 0.0% 5: mem: 6.42 MiB (0.3%) command: systemd-journald pid: 1478 cpu: 0.0% Info: Processes: 116 Uptime: 9d 16m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 5.3.5-g4060d9507 aarch64 bits: 64 compiler: gcc v: 7.4.1 
           parameters: root=LABEL=rootfs rootwait rootfstype=ext4 console=ttyS0,115200 
           console=tty1 panic=10 consoleblank=0 loglevel=1 ubootpart= usb-storage.quirks= 
           Console: tty 0 dm: N/A Distro: Debian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: OrangePi 3 details: N/A Memory:    RAM: total: 1.95 GiB used: 425.6 MiB (21.3%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: N/A min/max: N/A Core speeds (MHz): No speed data found for 4 cores. 
           Features: aes asimd cpuid crc32 evtstrm fp pmull sha1 sha2 
           Vulnerabilities: Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Not affected 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Not affected 
Graphics:  Device-1: mali-t720 driver: N/A bus ID: N/A chip ID: arm:1800000 
           Device-2: sun50i-h6-dw-hdmi driver: sun8i_dw_hdmi v: N/A bus ID: N/A 
           chip ID: allwinner:6000000 
           Device-3: sun50i-h6-display-engine driver: sun4i_drm v: N/A bus ID: N/A 
           chip ID: allwinner:display-engine 
           Display: server: No display server data found. Headless machine? tty: 157x43 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: sun50i-h6-dw-hdmi driver: sun8i_dw_hdmi bus ID: N/A 
           chip ID: allwinner:6000000 
           Device-2: simple-audio-card driver: asoc_simple_card bus ID: N/A 
           chip ID: simple-audio-card:sound 
           Sound Server: ALSA v: k5.3.5-g4060d9507 
Network:   Device-1: sun50i-h6-emac driver: dwmac_sun8i v: kernel port: N/A bus ID: N/A 
           chip ID: allwinner:5020000 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v6:  scope: link 
           Device-2: regulator-fixed driver: reg_fixed_voltage v: N/A port: N/A bus ID: N/A 
           chip ID: regulator-fixed:vcc-wifi-io 
           Device-3: regulator-fixed driver: reg_fixed_voltage v: N/A port: N/A bus ID: N/A 
           chip ID: regulator-fixed:vcc33-wifi 
           Device-4: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus ID: N/A 
           chip ID: mmc-pwrseq-simple:wifi-pwrseq 
           IF-ID-1: eth0.1 state: up speed: 1000 Mbps duplex: full mac:  
           IF-ID-2: eth0.10 state: up speed: 1000 Mbps duplex: full mac:  
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 7.28 GiB used: 1.72 GiB (23.6%) 
           ID-1: /dev/mmcblk2 model: 8GTF4R size: 7.28 GiB block size: physical: 512 B 
           logical: 512 B rev: 0x8 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.20 GiB size: 7.02 GiB (97.56%) used: 1.69 GiB (24.1%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk2p2 label: rootfs 
           uuid: 4e871a59-3f3a-4c08-8fa7-1741467f17b8 
           ID-2: /boot raw size: 64.0 MiB size: 63.9 MiB (99.78%) used: 25.9 MiB (40.5%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk2p1 label: BOOT uuid: 6104-9E4B 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 3-1:2 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 5-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 6-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
           Hub: 7-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ftp.cn.debian.org/debian stretch main contrib non-free
           2: deb http: //ftp.cn.debian.org/debian stretch-updates main contrib non-free
           3: deb http: //security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x stretch main
           2: deb-src https: //deb.nodesource.com/node_10.x stretch main
Processes: CPU top: 5 
           1: cpu: 0.3% command: sshd: pid: 24387 mem: 6.01 MiB (0.3%) 
           2: cpu: 0.1% command: systemd pid: 24389 mem: 5.41 MiB (0.2%) 
           3: cpu: 0.1% command: bash pid: 24403 mem: 2.21 MiB (0.1%) 
           4: cpu: 0.1% command: [kworker/1:0h-kb] pid: 24763 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: init pid: 1 mem: 6.40 MiB (0.3%) 
           Memory top: 5 
           1: mem: 295.8 MiB (14.8%) command: named pid: 1797 cpu: 0.0% 
           2: mem: 16.4 MiB (0.8%) command: networkmanager pid: 1630 cpu: 0.0% 
           3: mem: 11.5 MiB (0.5%) command: dhcpd pid: 1876 cpu: 0.0% 
           4: mem: 8.45 MiB (0.4%) command: modemmanager pid: 1620 cpu: 0.0% 
           5: mem: 6.42 MiB (0.3%) command: systemd-journald pid: 1478 cpu: 0.0% 
Info:      Processes: 116 Uptime: 9d 16m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #15942 - Brand: Samsung eMMC (8GTF4)