Benchmark #16107 - pibenchmarks.com

Brand: Netac SD (SDXXX)
A1 C10 V10 U1
#56 / 1,701
335
#1,419 / 1,701
#265 / 405
1,045
	Amazon.com AliExpress Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-09 17:29:46
#16,107
952
-93 (-9.77%)
Anonymous
idk

Secure Digital (SD) Card Details
Netac SD (SDXXX)
A1 C10 V10 U1
29.2G
SD
Netac
SD16G
SD
6.00
0xff
42
2.0
08/2019
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
17 MB/s
40.68 MB/s
40.86 MB/s
523 IOPS
2,468 IOPS
2,095 KB/s
9,872 KB/s
10,335 KB/s
1,950 KB/s
7,058 KB/s
2,222 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 730.7 MiB (18.4%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 139x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 495.22 GiB used: 224.11 GiB (45.3%) ID-1: /dev/mmcblk0 model: SD16G size: 29.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: HGST (Hitachi) model: HTS545050A7E680 family: /HGST Travelstar Z5K500 size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s rotation: 5400 rpm rev: GR2OA230 temp: 31 C scheme: MBR SMART: yes state: enabled health: PASSED on: 209d 4h cycles: 3317 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.21 GiB size: 28.73 GiB (98.35%) used: 10.49 GiB (36.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /mnt/usbhdd raw size: 465.76 GiB size: 465.76 GiB (100.00%) used: 213.56 GiB (45.9%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: h uuid: BE5EA3945EA343CD Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Canon type: driver: usblp interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 04a9:176c Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: SimpleTech type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 4971:1024 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 33.5% command: [/usr/share/webm] pid: 3442 mem: 0.00 MiB (0.0%) 2: cpu: 8.1% command: zandronum-server pid: 696 mem: 52.8 MiB (1.3%) 3: cpu: 2.5% command: srb2kart pid: 27762 mem: 47.0 MiB (1.1%) 4: cpu: 2.1% command: pihole-ftl pid: 5709 mem: 160.8 MiB (4.0%) 5: cpu: 0.8% command: lolisafe.js started by: node pid: 6820 mem: 86.2 MiB (2.1%) Memory top: 5 1: mem: 160.8 MiB (4.0%) command: pihole-ftl pid: 5709 cpu: 2.1% 2: mem: 86.2 MiB (2.1%) command: lolisafe.js started by: node pid: 6820 cpu: 0.8% 3: mem: 52.8 MiB (1.3%) command: zandronum-server pid: 696 cpu: 8.1% 4: mem: 47.0 MiB (1.1%) command: srb2kart pid: 27762 cpu: 2.5% 5: mem: 36.9 MiB (0.9%) command: pm2 pid: 3175 cpu: 0.1% Info: Processes: 158 Uptime: 14d 1h 35m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 
           video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 730.7 MiB (18.4%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 139x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 495.22 GiB used: 224.11 GiB (45.3%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 29.46 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: HGST (Hitachi) model: HTS545050A7E680 
           family: /HGST Travelstar Z5K500 size: 465.76 GiB block size: physical: 4096 B 
           logical: 512 B sata: 2.6 speed: 6.0 Gb/s rotation: 5400 rpm rev: GR2OA230 temp: 31 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 209d 4h cycles: 3317 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.21 GiB size: 28.73 GiB (98.35%) used: 10.49 GiB (36.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /mnt/usbhdd raw size: 465.76 GiB size: 465.76 GiB (100.00%) 
           used: 213.56 GiB (45.9%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: h 
           uuid: BE5EA3945EA343CD 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Canon type:  driver: usblp interfaces: 2 
           rev: 2.0 speed: 480 Mb/s chip ID: 04a9:176c Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: SimpleTech type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 4971:1024 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 33.5% command: [/usr/share/webm] pid: 3442 mem: 0.00 MiB (0.0%) 
           2: cpu: 8.1% command: zandronum-server pid: 696 mem: 52.8 MiB (1.3%) 
           3: cpu: 2.5% command: srb2kart pid: 27762 mem: 47.0 MiB (1.1%) 
           4: cpu: 2.1% command: pihole-ftl pid: 5709 mem: 160.8 MiB (4.0%) 
           5: cpu: 0.8% command: lolisafe.js started by: node pid: 6820 mem: 86.2 MiB (2.1%) 
           Memory top: 5 
           1: mem: 160.8 MiB (4.0%) command: pihole-ftl pid: 5709 cpu: 2.1% 
           2: mem: 86.2 MiB (2.1%) command: lolisafe.js started by: node pid: 6820 cpu: 0.8% 
           3: mem: 52.8 MiB (1.3%) command: zandronum-server pid: 696 cpu: 8.1% 
           4: mem: 47.0 MiB (1.1%) command: srb2kart pid: 27762 cpu: 2.5% 
           5: mem: 36.9 MiB (0.9%) command: pm2 pid: 3175 cpu: 0.1% 
Info:      Processes: 158 Uptime: 14d 1h 35m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.38

Benchmark #16107 - Brand: Netac SD (SDXXX)