Benchmark #16124 - pibenchmarks.com

Brand: Smart mSATA SSD
SSD (mSATA)
#875 / 1,539
3
#430 / 1,539
#412 / 875
#18 / 69
6,599
	Amazon.com Amazon.ca

Overview
2020-04-09 18:33:15
#16,124
5,388
-1,211 (-22.48%)
Wadjo
SMART MSATA 24.1GB using USB adapter

Storage Details
Smart mSATA SSD
SSD (mSATA)
22G
SSD
Smart
SG9MSM6D024GPM00
2.5 inch
SATA
3.00
5,000
1d6b:1153
0x1d6b (Linux Foundation)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
163 MB/s
287.16 MB/s
235.27 MB/s
8,966 IOPS
12,270 IOPS
35,866 KB/s
49,083 KB/s
16,040 KB/s
13,610 KB/s
11,326 KB/s
15,825 KB/s

inxi Results
System: Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 210.2 MiB (5.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 123x53 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Use of uninitialized value in string ne at ./inxi line 8920. Drives: Local Storage: total: 35.46 GiB used: 1.33 GiB (3.8%) ID-1: /dev/mmcblk0 model: SD16G size: 14.49 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: SG9MSM6D024GPM00 size: 20.97 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: S8FM05.3 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 26d 3h cycles: 2081 written: 6.7 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 20.72 GiB size: 20.36 GiB (98.30%) used: 1.28 GiB (6.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.24 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.0% command: init pid: 1 mem: 7.98 MiB (0.2%) 2: cpu: 0.6% command: smartd pid: 1728 mem: 3.21 MiB (0.0%) 3: cpu: 0.1% command: systemd-journald pid: 100 mem: 7.77 MiB (0.1%) 4: cpu: 0.1% command: [kworker/u8:2-events_unbound] pid: 114 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: systemd-udevd pid: 147 mem: 3.83 MiB (0.0%) Memory top: 5 1: mem: 7.98 MiB (0.2%) command: init pid: 1 cpu: 1.0% 2: mem: 7.77 MiB (0.1%) command: systemd-journald pid: 100 cpu: 0.1% 3: mem: 6.53 MiB (0.1%) command: systemd pid: 663 cpu: 0.0% 4: mem: 6.10 MiB (0.1%) command: sshd: pid: 734 cpu: 0.0% 5: mem: 5.59 MiB (0.1%) command: systemd-logind pid: 325 cpu: 0.0% Info: Processes: 119 Uptime: 7m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 210.2 MiB (5.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 123x53 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Use of uninitialized value in string ne at ./inxi line 8920.
Drives:    Local Storage: total: 35.46 GiB used: 1.33 GiB (3.8%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.49 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: SG9MSM6D024GPM00 size: 20.97 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: S8FM05.3 
           temp: 30 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 26d 3h cycles: 2081 written: 6.7 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 20.72 GiB size: 20.36 GiB (98.30%) used: 1.28 GiB (6.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.24 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.0% command: init pid: 1 mem: 7.98 MiB (0.2%) 
           2: cpu: 0.6% command: smartd pid: 1728 mem: 3.21 MiB (0.0%) 
           3: cpu: 0.1% command: systemd-journald pid: 100 mem: 7.77 MiB (0.1%) 
           4: cpu: 0.1% command: [kworker/u8:2-events_unbound] pid: 114 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: systemd-udevd pid: 147 mem: 3.83 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.98 MiB (0.2%) command: init pid: 1 cpu: 1.0% 
           2: mem: 7.77 MiB (0.1%) command: systemd-journald pid: 100 cpu: 0.1% 
           3: mem: 6.53 MiB (0.1%) command: systemd pid: 663 cpu: 0.0% 
           4: mem: 6.10 MiB (0.1%) command: sshd: pid: 734 cpu: 0.0% 
           5: mem: 5.59 MiB (0.1%) command: systemd-logind pid: 325 cpu: 0.0% 
Info:      Processes: 119 Uptime: 7m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #16124 - Brand: Smart mSATA SSD