Benchmark #16469 - pibenchmarks.com

Brand: Samsung PM851 mSATA Series
SSD (mSATA)
#491 / 1,679
20
#545 / 1,679
#525 / 984
#14 / 69
6,783
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-10 15:24:11
#16,469
2,211
-4,572 (-206.78%)
Anonymous
Samsung SSD PM851 256Gb mSATA

Storage Details
Samsung PM851 mSATA Series
SSD (mSATA)
256G
SSD
Samsung
SSDPM851mSATA256GB
SATA
2.10
480
045b:0229
0x045b (Hitachi, Ltd)
0x0229
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
250 (-150)
450 (-50)

Operating System

Ubuntu 18.04.4 LTS
armv7l

Benchmark Results
30.2 MB/s
27.47 MB/s
27.09 MB/s
3,165 IOPS
2,384 IOPS
12,663 KB/s
9,536 KB/s
9,456 KB/s
8,916 KB/s
8,923 KB/s
9,516 KB/s

inxi Results
System: Kernel: 5.3.0-1022-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 928.9 MiB used: 231.8 MiB (25.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 193x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:6 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 238.47 GiB used: 1.82 GiB (0.8%) ID-1: /dev/sda type: USB vendor: Samsung model: SSD PM851 mSATA size: 238.47 GiB block size: physical: 512 B logical: 512 B rev: EXT4 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.50 GiB (98.44%) used: 1.75 GiB (0.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 79.2 MiB (31.4%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 7297-5AF9 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:5 info: Hitachi type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 5.3% command: [kworker/3:0-eve] pid: 1755 mem: 0.00 MiB (0.0%) 2: cpu: 3.7% command: [kworker/3:3-eve] pid: 2089 mem: 0.00 MiB (0.0%) 3: cpu: 1.6% command: [kworker/u8:0-ev] pid: 4932 mem: 0.00 MiB (0.0%) 4: cpu: 1.5% command: [kworker/3:2-mm_] pid: 2185 mem: 0.00 MiB (0.0%) 5: cpu: 1.4% command: [kworker/3:1-eve] pid: 2177 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 13.6 MiB (1.5%) command: unattended-upgrade-shutdown started by: python3 pid: 1335 cpu: 0.0% 2: mem: 11.5 MiB (1.3%) command: networkd-dispatcher started by: python3 pid: 1317 cpu: 0.0% 3: mem: 8.64 MiB (1.0%) command: systemd-journald pid: 764 cpu: 0.0% 4: mem: 6.48 MiB (0.7%) command: init pid: 1 cpu: 0.0% 5: mem: 5.26 MiB (0.6%) command: systemd pid: 1452 cpu: 0.0% Info: Processes: 138 Uptime: 5h 11m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

inxi Results

System:    Kernel: 5.3.0-1022-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 
           console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 928.9 MiB used: 231.8 MiB (25.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 193x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:6 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 238.47 GiB used: 1.82 GiB (0.8%) 
           ID-1: /dev/sda type: USB vendor: Samsung model: SSD PM851 mSATA size: 238.47 GiB 
           block size: physical: 512 B logical: 512 B rev: EXT4 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 234.50 GiB (98.44%) used: 1.75 GiB (0.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 79.2 MiB (31.4%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 7297-5AF9 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:5 info: Hitachi type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 5.3% command: [kworker/3:0-eve] pid: 1755 mem: 0.00 MiB (0.0%) 
           2: cpu: 3.7% command: [kworker/3:3-eve] pid: 2089 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.6% command: [kworker/u8:0-ev] pid: 4932 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.5% command: [kworker/3:2-mm_] pid: 2185 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.4% command: [kworker/3:1-eve] pid: 2177 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 13.6 MiB (1.5%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1335 cpu: 0.0% 
           2: mem: 11.5 MiB (1.3%) command: networkd-dispatcher started by: python3 pid: 1317 
           cpu: 0.0% 
           3: mem: 8.64 MiB (1.0%) command: systemd-journald pid: 764 cpu: 0.0% 
           4: mem: 6.48 MiB (0.7%) command: init pid: 1 cpu: 0.0% 
           5: mem: 5.26 MiB (0.6%) command: systemd pid: 1452 cpu: 0.0% 
Info:      Processes: 138 Uptime: 5h 11m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

Benchmark #16469 - Brand: Samsung PM851 mSATA Series