Benchmark #16566 - pibenchmarks.com

Brand: SanDisk Ultra CZ48 USB
USB Flash
#53 / 1,700
346
#1,419 / 1,700
#39 / 404
1,042
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-10 21:23:02
#16,566
127
-915 (-720.47%)
Anonymous

Secure Digital (SD) Card Details
SanDisk Ultra CZ48 USB
USB Flash
3.4G
SD
SanDisk
SDHC
3.00
0x03
SD
8.0
02/2010
Class 2
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
3 MB/s
9.82 MB/s
9.85 MB/s
54 IOPS
232 IOPS
216 KB/s
930 KB/s
1,060 KB/s
1,373 KB/s
891 KB/s
219 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 225.9 MiB (5.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 136x39 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 115.48 GiB used: 2.92 GiB (2.5%) ID-1: /dev/mmcblk0 model: SU04G size: 3.69 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: Expansion size: 111.79 GiB block size: physical: 4096 B logical: 512 B rev: 0710 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 3.44 GiB size: 3.32 GiB (96.63%) used: 2.87 GiB (86.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.9 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 ID-2: /dev/sda2 size: 6.57 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Seagate RSS LLC Expansion Portable type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:231a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.2% command: init pid: 1 mem: 8.07 MiB (0.2%) 2: cpu: 0.3% command: systemd-udevd pid: 144 mem: 3.98 MiB (0.1%) 3: cpu: 0.2% command: systemd-journald pid: 110 mem: 7.70 MiB (0.1%) 4: cpu: 0.2% command: [kworker/u8:2-events_unbound] pid: 112 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: dbus-daemon pid: 330 mem: 3.39 MiB (0.0%) Memory top: 5 1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 1112 cpu: 0.1% 2: mem: 10.2 MiB (0.2%) command: udisksd pid: 328 cpu: 0.0% 3: mem: 8.07 MiB (0.2%) command: init pid: 1 cpu: 2.2% 4: mem: 7.70 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.2% 5: mem: 7.18 MiB (0.1%) command: systemd pid: 659 cpu: 0.0% Info: Processes: 148 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 225.9 MiB (5.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 136x39 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 115.48 GiB used: 2.92 GiB (2.5%) 
           ID-1: /dev/mmcblk0 model: SU04G size: 3.69 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: Expansion size: 111.79 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0710 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 3.44 GiB size: 3.32 GiB (96.63%) used: 2.87 GiB (86.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.9 MiB (21.0%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
           ID-2: /dev/sda2 size: 6.57 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Seagate RSS LLC Expansion Portable type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:231a Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.2% command: init pid: 1 mem: 8.07 MiB (0.2%) 
           2: cpu: 0.3% command: systemd-udevd pid: 144 mem: 3.98 MiB (0.1%) 
           3: cpu: 0.2% command: systemd-journald pid: 110 mem: 7.70 MiB (0.1%) 
           4: cpu: 0.2% command: [kworker/u8:2-events_unbound] pid: 112 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: dbus-daemon pid: 330 mem: 3.39 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 1112 cpu: 0.1% 
           2: mem: 10.2 MiB (0.2%) command: udisksd pid: 328 cpu: 0.0% 
           3: mem: 8.07 MiB (0.2%) command: init pid: 1 cpu: 2.2% 
           4: mem: 7.70 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.2% 
           5: mem: 7.18 MiB (0.1%) command: systemd pid: 659 cpu: 0.0% 
Info:      Processes: 148 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38