Benchmark #16751 - pibenchmarks.com

Brand: Western Digital Blue 3.5" HDD
HDD (3.5" SATA)
#341 / 1,539
22
#931 / 1,539
#17 / 66
#7 / 30
2,359
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-11 08:57:49
#16,751
1,536
-823 (-53.58%)
Tibbs
Western Digital WD10 Blue - InterTech Veloce

Storage Details
Western Digital Blue 3.5" HDD
HDD (3.5" SATA)
1000G
HDD
WDC
WD10EZEX-08WN4A0
3.5 inch
SATA
7,200
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
84.5 MB/s
175.13 MB/s
277.06 MB/s
741 IOPS
1,132 IOPS
2,966 KB/s
4,528 KB/s
14,661 KB/s
12,851 KB/s
1,432 KB/s
2,249 KB/s

inxi Results
System: Kernel: 4.19.57-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=698e33bd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 275.5 MiB (6.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting compositor: xcompmgr tty: 175x37 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 960.44 GiB used: 11.78 GiB (1.2%) ID-1: /dev/mmcblk0 model: USD00 size: 28.92 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD10 EZEX-08WN4A0 drive model: WD10EZEX-08WN4A0 family: Blue size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 7200 rpm rev: 8101 drive rev: 02.01A02 temp: 41 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7 hrs cycles: 21 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 916.61 GiB (98.43%) used: 6.44 GiB (0.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 3FFE-CDCA ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.0 MiB (15.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA ID-4: /media/pi/rootfs raw size: 28.66 GiB size: 28.15 GiB (98.21%) used: 5.26 GiB (18.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:18 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.6% command: init pid: 1 mem: 7.95 MiB (0.2%) 2: cpu: 0.4% command: pcmanfm pid: 562 mem: 23.6 MiB (0.6%) 3: cpu: 0.4% command: zenity pid: 584 mem: 55.1 MiB (1.4%) 4: cpu: 0.3% command: lxpanel pid: 560 mem: 27.5 MiB (0.7%) 5: cpu: 0.3% command: smartd pid: 1334 mem: 3.15 MiB (0.0%) Memory top: 5 1: mem: 55.1 MiB (1.4%) command: zenity pid: 584 cpu: 0.4% 2: mem: 48.8 MiB (1.2%) command: xorg pid: 457 cpu: 0.2% 3: mem: 27.5 MiB (0.7%) command: lxpanel pid: 560 cpu: 0.3% 4: mem: 23.6 MiB (0.6%) command: pcmanfm pid: 562 cpu: 0.4% 5: mem: 17.1 MiB (0.4%) command: piwiz pid: 591 cpu: 0.1% Info: Processes: 138 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.57-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=698e33bd-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 275.5 MiB (6.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting compositor: xcompmgr 
           tty: 175x37 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 960.44 GiB used: 11.78 GiB (1.2%) 
           ID-1: /dev/mmcblk0 model: USD00 size: 28.92 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD10 EZEX-08WN4A0 
           drive model: WD10EZEX-08WN4A0 family: Blue size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 7200 rpm 
           rev: 8101 drive rev: 02.01A02 temp: 41 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 7 hrs cycles: 21 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 916.61 GiB (98.43%) used: 6.44 GiB (0.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 3FFE-CDCA 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 39.0 MiB (15.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot 
           uuid: 3FFE-CDCA 
           ID-4: /media/pi/rootfs raw size: 28.66 GiB size: 28.15 GiB (98.21%) 
           used: 5.26 GiB (18.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:18 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.6% command: init pid: 1 mem: 7.95 MiB (0.2%) 
           2: cpu: 0.4% command: pcmanfm pid: 562 mem: 23.6 MiB (0.6%) 
           3: cpu: 0.4% command: zenity pid: 584 mem: 55.1 MiB (1.4%) 
           4: cpu: 0.3% command: lxpanel pid: 560 mem: 27.5 MiB (0.7%) 
           5: cpu: 0.3% command: smartd pid: 1334 mem: 3.15 MiB (0.0%) 
           Memory top: 5 
           1: mem: 55.1 MiB (1.4%) command: zenity pid: 584 cpu: 0.4% 
           2: mem: 48.8 MiB (1.2%) command: xorg pid: 457 cpu: 0.2% 
           3: mem: 27.5 MiB (0.7%) command: lxpanel pid: 560 cpu: 0.3% 
           4: mem: 23.6 MiB (0.6%) command: pcmanfm pid: 562 cpu: 0.4% 
           5: mem: 17.1 MiB (0.4%) command: piwiz pid: 591 cpu: 0.1% 
Info:      Processes: 138 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #16751 - Brand: Western Digital Blue 3.5" HDD