Benchmark #16963 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#58 / 1,675
304
#991 / 1,675
#913 / 984
#129 / 144
3,254
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-11 20:46:40
#16,963
2,429
-825 (-33.96%)
Anonymous

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
62G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
0781:5580
0x0781 (SanDisk Corp.)
0x5580 (SDCZ80 Flash Drive)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
35.4 MB/s
130.64 MB/s
132.13 MB/s
2,397 IOPS
2,491 IOPS
9,591 KB/s
9,967 KB/s
20,910 KB/s
18,618 KB/s
9,672 KB/s
9,491 KB/s

inxi Results
System: Kernel: 4.19.113-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 352.6 MiB (8.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 189x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.113-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 146.56 GiB used: 9.89 GiB (6.7%) ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD family: based SSDs size: 58.43 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s rev: 0001 drive rev: 3 scheme: MBR SMART: yes state: enabled health: PASSED on: 71d 23h cycles: 241 read: 146.87 GiB written: 443.78 GiB ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Fit size: 28.65 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.43 GiB size: 57.26 GiB (98.00%) used: 9.80 GiB (17.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: d6d4c2b4-cc0c-41fc-9372-30e994417ab5 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.4 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: RASPBIAN uuid: 9F2D-0578 ID-3: /mnt/usbstorage raw size: 28.65 GiB size: 28.08 GiB (97.99%) used: 44.0 MiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: b0c2451f-ed9b-4120-86e4-30faf6a4dc75 Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:3 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5583 Device-2: 2-2:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.8% command: packagekitd pid: 28632 mem: 12.8 MiB (0.3%) 2: cpu: 0.5% command: bash pid: 28435 mem: 2.79 MiB (0.0%) 3: cpu: 0.2% command: sudo pid: 28425 mem: 3.22 MiB (0.0%) 4: cpu: 0.1% command: mysqld pid: 642 mem: 56.9 MiB (1.4%) 5: cpu: 0.0% command: init pid: 1 mem: 8.20 MiB (0.2%) Memory top: 5 1: mem: 56.9 MiB (1.4%) command: mysqld pid: 642 cpu: 0.1% 2: mem: 17.2 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 538 cpu: 0.0% 3: mem: 14.9 MiB (0.3%) command: fail2ban-server started by: python3 pid: 540 cpu: 0.0% 4: mem: 12.8 MiB (0.3%) command: packagekitd pid: 28632 cpu: 0.8% 5: mem: 10.4 MiB (0.2%) command: vncserver-x11-core pid: 546 cpu: 0.0% Info: Processes: 143 Uptime: 5d 10h 31m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.113-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 352.6 MiB (8.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 189x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.113-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 146.56 GiB used: 9.89 GiB (6.7%) 
           ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD 
           family: based SSDs size: 58.43 GiB block size: physical: 512 B logical: 512 B sata: 2.6 
           speed: 6.0 Gb/s rev: 0001 drive rev: 3 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 71d 23h cycles: 241 read: 146.87 GiB 
           written: 443.78 GiB 
           ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Fit size: 28.65 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.43 GiB size: 57.26 GiB (98.00%) used: 9.80 GiB (17.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: d6d4c2b4-cc0c-41fc-9372-30e994417ab5 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.4 MiB (21.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: RASPBIAN uuid: 9F2D-0578 
           ID-3: /mnt/usbstorage raw size: 28.65 GiB size: 28.08 GiB (97.99%) 
           used: 44.0 MiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: b0c2451f-ed9b-4120-86e4-30faf6a4dc75 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:3 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5583 Device-2: 2-2:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.8% command: packagekitd pid: 28632 mem: 12.8 MiB (0.3%) 
           2: cpu: 0.5% command: bash pid: 28435 mem: 2.79 MiB (0.0%) 
           3: cpu: 0.2% command: sudo pid: 28425 mem: 3.22 MiB (0.0%) 
           4: cpu: 0.1% command: mysqld pid: 642 mem: 56.9 MiB (1.4%) 
           5: cpu: 0.0% command: init pid: 1 mem: 8.20 MiB (0.2%) 
           Memory top: 5 
           1: mem: 56.9 MiB (1.4%) command: mysqld pid: 642 cpu: 0.1% 
           2: mem: 17.2 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 538 cpu: 0.0% 
           3: mem: 14.9 MiB (0.3%) command: fail2ban-server started by: python3 pid: 540 cpu: 0.0% 
           4: mem: 12.8 MiB (0.3%) command: packagekitd pid: 28632 cpu: 0.8% 
           5: mem: 10.4 MiB (0.2%) command: vncserver-x11-core pid: 546 cpu: 0.0% 
Info:      Processes: 143 Uptime: 5d 10h 31m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.38

Benchmark #16963 - Brand: SanDisk Extreme Pro USB