Benchmark #16974 - pibenchmarks.com

Brand: Transcend (USDU1)
C10 V10 U1
#74 / 1,701
278
#1,369 / 1,701
#229 / 405
1,132
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-11 21:27:02
#16,974
774
-358 (-46.25%)
Anonymous

Secure Digital (SD) Card Details
Transcend (USDU1)
C10 V10 U1
12.2G
SD
Transcend
USDU1
SDHC
5.00
0x74
J
2.0
09/2019
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
14.7 MB/s
40.95 MB/s
40.93 MB/s
268 IOPS
2,622 IOPS
1,073 KB/s
10,491 KB/s
8,149 KB/s
1,231 KB/s
7,762 KB/s
953 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.96 GiB used: 155.6 MiB (7.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 14.87 GiB used: 6.72 GiB (45.2%) ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 12.19 GiB size: 11.87 GiB (97.40%) used: 6.67 GiB (56.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: a3d4a35d-8341-4a3d-ba35-a9a37a0b8811 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 3C5B-D548 Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: BOOT uuid: 2122-EDB6 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: f5c39056-11e5-4343-85d7-6167b59be5d7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: plcmonitor.exe started by: mono pid: 416 mem: 50.0 MiB (2.5%) 2: cpu: 0.2% command: init pid: 1 mem: 8.10 MiB (0.4%) 3: cpu: 0.1% command: systemd-journald pid: 101 mem: 8.25 MiB (0.4%) 4: cpu: 0.1% command: bash pid: 2055 mem: 2.84 MiB (0.1%) 5: cpu: 0.1% command: packagekitd pid: 2202 mem: 12.3 MiB (0.6%) Memory top: 5 1: mem: 50.0 MiB (2.5%) command: plcmonitor.exe started by: mono pid: 416 cpu: 0.7% 2: mem: 12.3 MiB (0.6%) command: packagekitd pid: 2202 cpu: 0.1% 3: mem: 10.3 MiB (0.5%) command: vncserver-x11-core pid: 429 cpu: 0.0% 4: mem: 8.25 MiB (0.4%) command: systemd-journald pid: 101 cpu: 0.1% 5: mem: 8.10 MiB (0.4%) command: init pid: 1 cpu: 0.2% Info: Processes: 138 Uptime: 36m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.96 GiB used: 155.6 MiB (7.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 14.87 GiB used: 6.72 GiB (45.2%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 12.19 GiB size: 11.87 GiB (97.40%) used: 6.67 GiB (56.1%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: a3d4a35d-8341-4a3d-ba35-a9a37a0b8811 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 3C5B-D548 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: BOOT uuid: 2122-EDB6 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: f5c39056-11e5-4343-85d7-6167b59be5d7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: plcmonitor.exe started by: mono pid: 416 mem: 50.0 MiB (2.5%) 
           2: cpu: 0.2% command: init pid: 1 mem: 8.10 MiB (0.4%) 
           3: cpu: 0.1% command: systemd-journald pid: 101 mem: 8.25 MiB (0.4%) 
           4: cpu: 0.1% command: bash pid: 2055 mem: 2.84 MiB (0.1%) 
           5: cpu: 0.1% command: packagekitd pid: 2202 mem: 12.3 MiB (0.6%) 
           Memory top: 5 
           1: mem: 50.0 MiB (2.5%) command: plcmonitor.exe started by: mono pid: 416 cpu: 0.7% 
           2: mem: 12.3 MiB (0.6%) command: packagekitd pid: 2202 cpu: 0.1% 
           3: mem: 10.3 MiB (0.5%) command: vncserver-x11-core pid: 429 cpu: 0.0% 
           4: mem: 8.25 MiB (0.4%) command: systemd-journald pid: 101 cpu: 0.1% 
           5: mem: 8.10 MiB (0.4%) command: init pid: 1 cpu: 0.2% 
Info:      Processes: 138 Uptime: 36m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #16974 - Brand: Transcend (USDU1)