Benchmark #17165 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,700
691
#957 / 1,700
#6 / 94
#9 / 89
3,996
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-12 08:18:27
#17,165
767
-3,229 (-420.99%)
Anonymous
Kingston A400 SSD on Pi 4 using StarTech SATA

Storage Details
Generic USB Disk
USB Flash
14.3G
USB Flash
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
17.1 MB/s
107.4 MB/s
108.3 MB/s
307 IOPS
1,834 IOPS
1,228 KB/s
7,337 KB/s
20,552 KB/s
1,895 KB/s
4,651 KB/s
788 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/md127 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles program_usb_timeout=1 Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 216.9 MiB (5.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 117x62 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 36.12 GiB used: 3.67 GiB (10.2%) ID-1: /dev/mmcblk0 model: 00000 size: 7.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra USB 3.0 size: 14.32 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra USB 3.0 size: 14.32 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Supported md-raid types: raid1 linear raid0 raid6 raid5 raid4 raid10 Device-1: md127 type: mdraid status: active Components: online: sdb1~c1 sda1~c0 Info: raid: mirror blocks: 15005696 report: 2/2 UU chunk size: N/A super blocks: 1.2 Partition: ID-1: / raw size: 14.31 GiB size: 14.02 GiB (97.99%) used: 3.58 GiB (25.5%) fs: ext4 block size: 4096 B dev: /dev/md127 label: N/A uuid: 0d7694c5-2f84-43a1-8d6a-8f888cea6669 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 99.4 MiB (39.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 Unmounted: ID-1: /dev/mmcblk0p2 size: 7.22 GiB fs: ext4 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Holtek Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04d9:1603 Device-2: 1-1.4:4 info: Xenta type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 1.1 speed: 12 Mb/s chip ID: 1d57:fa20 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:3 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5591 Device-4: 2-2:2 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5591 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.7% command: init pid: 1 mem: 7.79 MiB (0.1%) 2: cpu: 0.6% command: packagekitd pid: 1447 mem: 12.9 MiB (0.3%) 3: cpu: 0.3% command: systemd-journald pid: 249 mem: 6.46 MiB (0.1%) 4: cpu: 0.3% command: bash pid: 1300 mem: 2.78 MiB (0.0%) 5: cpu: 0.2% command: [usb-storage] pid: 152 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 1447 cpu: 0.6% 2: mem: 10.2 MiB (0.2%) command: udisksd pid: 557 cpu: 0.2% 3: mem: 7.79 MiB (0.1%) command: init pid: 1 cpu: 1.7% 4: mem: 7.27 MiB (0.1%) command: systemd pid: 973 cpu: 0.0% 5: mem: 6.92 MiB (0.1%) command: polkitd pid: 630 cpu: 0.0% Info: Processes: 143 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/md127 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles program_usb_timeout=1 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 216.9 MiB (5.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 117x62 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 36.12 GiB used: 3.67 GiB (10.2%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 7.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra USB 3.0 size: 14.32 GiB 
           block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra USB 3.0 size: 14.32 GiB 
           block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Supported md-raid types: raid1 linear raid0 raid6 raid5 raid4 raid10 
           Device-1: md127 type: mdraid status: active Components: online: sdb1~c1 sda1~c0 
           Info: raid: mirror blocks: 15005696 report: 2/2 UU chunk size: N/A super blocks: 1.2 
Partition: ID-1: / raw size: 14.31 GiB size: 14.02 GiB (97.99%) used: 3.58 GiB (25.5%) fs: ext4 
           block size: 4096 B dev: /dev/md127 label: N/A 
           uuid: 0d7694c5-2f84-43a1-8d6a-8f888cea6669 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 99.4 MiB (39.4%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.22 GiB fs: ext4 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Holtek Keyboard type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04d9:1603 
           Device-2: 1-1.4:4 info: Xenta type: Keyboard,Mouse,HID driver: hid-generic,usbhid 
           interfaces: 3 rev: 1.1 speed: 12 Mb/s chip ID: 1d57:fa20 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:3 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5591 Device-4: 2-2:2 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5591 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.7% command: init pid: 1 mem: 7.79 MiB (0.1%) 
           2: cpu: 0.6% command: packagekitd pid: 1447 mem: 12.9 MiB (0.3%) 
           3: cpu: 0.3% command: systemd-journald pid: 249 mem: 6.46 MiB (0.1%) 
           4: cpu: 0.3% command: bash pid: 1300 mem: 2.78 MiB (0.0%) 
           5: cpu: 0.2% command: [usb-storage] pid: 152 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 1447 cpu: 0.6% 
           2: mem: 10.2 MiB (0.2%) command: udisksd pid: 557 cpu: 0.2% 
           3: mem: 7.79 MiB (0.1%) command: init pid: 1 cpu: 1.7% 
           4: mem: 7.27 MiB (0.1%) command: systemd pid: 973 cpu: 0.0% 
           5: mem: 6.92 MiB (0.1%) command: polkitd pid: 630 cpu: 0.0% 
Info:      Processes: 143 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38