Benchmark #17216 - pibenchmarks.com

Brand: Netac AnyDisk
USB Flash
#870 / 1,679
5
#1,420 / 1,679
#45 / 94
#43 / 89
1,007
	Amazon.com AliExpress

Overview
2020-04-12 10:51:18
#17,216
1,378
+371 (+26.92%)
kent
Netac

Storage Details
Netac AnyDisk
USB Flash
58.4G
USB Flash
Netac
OnlyDisk
3.10
5,000
0dd8:3d01
0x0dd8 (Netac Technology Co., Ltd)
0x3d01
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
18.2 MB/s
96.61 MB/s
106.44 MB/s
910 IOPS
2,690 IOPS
3,640 KB/s
10,761 KB/s
12,374 KB/s
5,295 KB/s
9,918 KB/s
4,225 KB/s

inxi Results
System: Kernel: 4.19.88-OPENFANS+20191229-v8 aarch64 bits: 64 compiler: gcc v: 9.1.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 cgroup_enable=1 cgroup_memory=1 cgroup_enable=cpuset cgroup_enable=memory swapaccount=1 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=lz4 zswap.max_pool_percent=25 rootwait Console: tty 0 dm: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 Memory: RAM: total: 979.3 MiB used: 195.6 MiB (20.0%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv8 v8l variant: cortex-a72 bits: 64 type: MCP arch: v8l family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: N/A tty: 128x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 88.07 GiB used: 5.95 GiB (6.8%) ID-1: /dev/mmcblk0 model: SD16G size: 29.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Netac model: OnlyDisk size: 58.59 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.34 GiB size: 57.39 GiB (98.36%) used: 5.88 GiB (10.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: ROOTFS uuid: e9d47927-3179-44a4-9346-4294a9e2f84f ID-2: /boot raw size: 252.0 MiB size: 251.7 MiB (99.89%) used: 68.1 MiB (27.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 8E32-4CE6 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.23 GiB fs: ext4 label: ROOTFS uuid: e9d47927-3179-44a4-9346-4294a9e2f84f ID-2: /dev/sda1 size: 252.0 MiB fs: vfat label: BOOT uuid: 8E32-4CE6 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Netac type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0dd8:3d01 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrors.tuna.tsinghua.edu.cn/debian/ buster main non-free contrib 2: deb http: //mirrors.tuna.tsinghua.edu.cn/debian-security buster/updates main 3: deb http: //mirrors.tuna.tsinghua.edu.cn/debian/ buster-updates main non-free contrib 4: deb http: //mirrors.tuna.tsinghua.edu.cn/debian/ buster-backports main non-free contrib No active apt repos in: /etc/apt/sources.list.d/rpi.list No active apt repos in: /etc/apt/sources.list.d/sid.list Processes: CPU top: 5 1: cpu: 1.3% command: init pid: 1 mem: 9.64 MiB (1.0%) 2: cpu: 0.4% command: [usb-storage] pid: 106 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: systemd-udevd pid: 199 mem: 4.80 MiB (0.4%) 4: cpu: 0.2% command: libvirtd pid: 444 mem: 24.5 MiB (2.5%) 5: cpu: 0.2% command: -bash pid: 2341 mem: 4.29 MiB (0.4%) Memory top: 5 1: mem: 24.5 MiB (2.5%) command: libvirtd pid: 444 cpu: 0.2% 2: mem: 13.3 MiB (1.3%) command: udisksd pid: 330 cpu: 0.0% 3: mem: 9.64 MiB (1.0%) command: init pid: 1 cpu: 1.3% 4: mem: 8.93 MiB (0.9%) command: modemmanager pid: 340 cpu: 0.0% 5: mem: 8.07 MiB (0.8%) command: systemd pid: 926 cpu: 0.0% Info: Processes: 143 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.88-OPENFANS+20191229-v8 aarch64 bits: 64 compiler: gcc v: 9.1.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           net.ifnames=0 cgroup_enable=1 cgroup_memory=1 cgroup_enable=cpuset cgroup_enable=memory 
           swapaccount=1 zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=lz4 
           zswap.max_pool_percent=25 rootwait 
           Console: tty 0 dm: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 
           Memory:    RAM: total: 979.3 MiB used: 195.6 MiB (20.0%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv8 v8l variant: cortex-a72 bits: 64 type: MCP arch: v8l 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: N/A tty: 128x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 88.07 GiB used: 5.95 GiB (6.8%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 29.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Netac model: OnlyDisk size: 58.59 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.34 GiB size: 57.39 GiB (98.36%) used: 5.88 GiB (10.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: ROOTFS 
           uuid: e9d47927-3179-44a4-9346-4294a9e2f84f 
           ID-2: /boot raw size: 252.0 MiB size: 251.7 MiB (99.89%) used: 68.1 MiB (27.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 8E32-4CE6 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.23 GiB fs: ext4 label: ROOTFS 
           uuid: e9d47927-3179-44a4-9346-4294a9e2f84f 
           ID-2: /dev/sda1 size: 252.0 MiB fs: vfat label: BOOT uuid: 8E32-4CE6 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Netac type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.1 speed: 5 Gb/s chip ID: 0dd8:3d01 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrors.tuna.tsinghua.edu.cn/debian/ buster main non-free contrib
           2: deb http: //mirrors.tuna.tsinghua.edu.cn/debian-security buster/updates main
           3: deb http: //mirrors.tuna.tsinghua.edu.cn/debian/ buster-updates main non-free contrib
           4: deb http: //mirrors.tuna.tsinghua.edu.cn/debian/ buster-backports main non-free contrib
           No active apt repos in: /etc/apt/sources.list.d/rpi.list 
           No active apt repos in: /etc/apt/sources.list.d/sid.list 
Processes: CPU top: 5 
           1: cpu: 1.3% command: init pid: 1 mem: 9.64 MiB (1.0%) 
           2: cpu: 0.4% command: [usb-storage] pid: 106 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: systemd-udevd pid: 199 mem: 4.80 MiB (0.4%) 
           4: cpu: 0.2% command: libvirtd pid: 444 mem: 24.5 MiB (2.5%) 
           5: cpu: 0.2% command: -bash pid: 2341 mem: 4.29 MiB (0.4%) 
           Memory top: 5 
           1: mem: 24.5 MiB (2.5%) command: libvirtd pid: 444 cpu: 0.2% 
           2: mem: 13.3 MiB (1.3%) command: udisksd pid: 330 cpu: 0.0% 
           3: mem: 9.64 MiB (1.0%) command: init pid: 1 cpu: 1.3% 
           4: mem: 8.93 MiB (0.9%) command: modemmanager pid: 340 cpu: 0.0% 
           5: mem: 8.07 MiB (0.8%) command: systemd pid: 926 cpu: 0.0% 
Info:      Processes: 143 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #17216 - Brand: Netac AnyDisk