Benchmark #17258 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,675
1,673
#453 / 1,675
#438 / 984
#56 / 370
7,317
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-12 12:44:25
#17,258
6,360
-957 (-15.05%)
112358
Sandisk Plus 240GB SSD on Pi 4b using StarTech SATA to USB(usb3s2sat3cb)

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
240G
SSD
SanDisk
SSDPLUS240GB
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
177 MB/s
274.43 MB/s
161.73 MB/s
10,004 IOPS
20,177 IOPS
40,019 KB/s
80,709 KB/s
14,577 KB/s
17,090 KB/s
14,455 KB/s
18,459 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 512.8 MiB (12.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 3840x2160~30Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 253.38 GiB used: 13.18 GiB (5.2%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 240GB size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UF2204RL temp: 45 C scheme: MBR SMART: yes state: enabled health: PASSED on: 35d 14h cycles: 75 read: 16 KiB written: 34 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.78 GiB (98.41%) used: 6.44 GiB (2.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-4: /media/pi/rootfs raw size: 29.56 GiB size: 29.03 GiB (98.23%) used: 6.64 GiB (22.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: KeyTronic KT-2001 Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 03f9:0100 Device-2: 1-1.4:4 info: Logitech MX518 Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c01e Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/pivpn-unstable.list 1: deb https: //deb.debian.org/debian/ unstable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.9% command: packagekitd pid: 32046 mem: 12.8 MiB (0.3%) 2: cpu: 0.5% command: bash pid: 31850 mem: 2.79 MiB (0.0%) 3: cpu: 0.1% command: sudo pid: 31840 mem: 3.14 MiB (0.0%) 4: cpu: 0.0% command: init pid: 1 mem: 8.12 MiB (0.2%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 80.8 MiB (2.0%) command: vncserver-x11-core pid: 524 cpu: 0.0% 2: mem: 79.8 MiB (2.0%) command: xorg pid: 639 cpu: 0.0% 3: mem: 48.7 MiB (1.2%) command: lxterminal pid: 1104 cpu: 0.0% 4: mem: 35.9 MiB (0.9%) command: vncagent pid: 658 cpu: 0.0% 5: mem: 31.5 MiB (0.8%) command: lxpanel pid: 758 cpu: 0.0% Info: Processes: 169 Uptime: 2d 16h 05m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 512.8 MiB (12.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 3840x2160~30Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 253.38 GiB used: 13.18 GiB (5.2%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 240GB size: 223.57 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UF2204RL temp: 45 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 35d 14h cycles: 75 read: 16 KiB 
           written: 34 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.78 GiB (98.41%) used: 6.44 GiB (2.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 9969-E3D2 
           ID-4: /media/pi/rootfs raw size: 29.56 GiB size: 29.03 GiB (98.23%) 
           used: 6.64 GiB (22.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: KeyTronic KT-2001 Keyboard type: Keyboard 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 03f9:0100 
           Device-2: 1-1.4:4 info: Logitech MX518 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c01e 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/pivpn-unstable.list 
           1: deb https: //deb.debian.org/debian/ unstable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.9% command: packagekitd pid: 32046 mem: 12.8 MiB (0.3%) 
           2: cpu: 0.5% command: bash pid: 31850 mem: 2.79 MiB (0.0%) 
           3: cpu: 0.1% command: sudo pid: 31840 mem: 3.14 MiB (0.0%) 
           4: cpu: 0.0% command: init pid: 1 mem: 8.12 MiB (0.2%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 80.8 MiB (2.0%) command: vncserver-x11-core pid: 524 cpu: 0.0% 
           2: mem: 79.8 MiB (2.0%) command: xorg pid: 639 cpu: 0.0% 
           3: mem: 48.7 MiB (1.2%) command: lxterminal pid: 1104 cpu: 0.0% 
           4: mem: 35.9 MiB (0.9%) command: vncagent pid: 658 cpu: 0.0% 
           5: mem: 31.5 MiB (0.8%) command: lxpanel pid: 758 cpu: 0.0% 
Info:      Processes: 169 Uptime: 2d 16h 05m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.38

Benchmark #17258 - Brand: SanDisk SSD Plus