Benchmark #17429 - pibenchmarks.com

Brand: SanDisk SD Ultra (00000)
C10 V10 U1
#490 / 1,679
20
#1,598 / 1,679
#381 / 394
415
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-12 23:18:41
#17,429
663
+248 (+37.41%)
Anonymous
Sandisk 8GB SD on Pi 4

Secure Digital (SD) Card Details
SanDisk SD Ultra (00000)
C10 V10 U1
14.7G
SD
SanDisk
00000
SDHC
5.00
0x00
0.0
07/2018
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
27.1 MB/s
39.23 MB/s
39.69 MB/s
337 IOPS
1,257 IOPS
1,351 KB/s
5,030 KB/s
4,301 KB/s
1,354 KB/s
4,321 KB/s
740 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 380.0 MiB (9.5%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 159x29 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 7.29 TiB used: 3.00 TiB (41.2%) ID-1: /dev/mmcblk0 model: 00000 size: 14.89 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: ST4000VN 000-2AH166 drive model: ST4000VN000-2AH166 family: NAS HDD size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5980 rpm rev: 0125 drive rev: SC60 temp: 32 C scheme: GPT SMART: yes state: enabled health: PASSED on: 3y 137d 6h cycles: 227 read: 29.66 TiB written: 11.61 TiB Pre-Fail: reallocated sector: 100 threshold: 10 attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 ID-3: /dev/sdb type: USB vendor: Seagate model: ST4000VN 000-2AH166 drive model: ST4000VN000-2AH166 family: NAS HDD size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5980 rpm rev: 0125 drive rev: SC60 temp: 31 C scheme: GPT SMART: yes state: enabled health: PASSED on: 3y 137d 3h cycles: 223 read: 16.59 TiB written: 13.85 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.63 GiB size: 14.38 GiB (98.24%) used: 4.80 GiB (33.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /mnt/nasd1 raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 1.93 TiB (54.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: nasd1 uuid: e2fe803a-f255-4d64-9c55-f0c386057c52 ID-4: /mnt/nasd2 raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 1.06 TiB (29.7%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: nasd2 uuid: d445dfee-de94-4e79-9c3b-54ccd42c89d9 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0567 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/mono-official.list 1: deb http: //download.mono-project.com/repo/debian buster main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/webmin.list 1: deb https: //download.webmin.com/download/repository sarge contrib Processes: CPU top: 5 1: cpu: 5.2% command: [/usr/share/webm] pid: 3547 mem: 0.00 MiB (0.0%) 2: cpu: 2.1% command: smbd pid: 25289 mem: 13.3 MiB (0.3%) 3: cpu: 1.7% command: plex pid: 571 mem: 63.7 MiB (1.6%) 4: cpu: 1.2% command: smbd pid: 31967 mem: 21.1 MiB (0.5%) 5: cpu: 0.6% command: [usb-storage] pid: 499 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 63.7 MiB (1.6%) command: plex pid: 571 cpu: 1.7% 2: mem: 21.1 MiB (0.5%) command: smbd pid: 31967 cpu: 1.2% 3: mem: 18.0 MiB (0.4%) command: duplicati.server.exe started by: mono-sgen pid: 22493 cpu: 0.0% 4: mem: 17.4 MiB (0.4%) command: plex pid: 2141 cpu: 0.1% 5: mem: 13.3 MiB (0.3%) command: smbd pid: 25289 cpu: 2.1% Info: Processes: 158 Uptime: 1d 5h 44m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 380.0 MiB (9.5%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 159x29 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 7.29 TiB used: 3.00 TiB (41.2%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 14.89 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: ST4000VN 000-2AH166 
           drive model: ST4000VN000-2AH166 family: NAS HDD size: 3.64 TiB block size: 
           physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5980 rpm 
           rev: 0125 drive rev: SC60 temp: 32 C 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 3y 137d 6h cycles: 227 read: 29.66 TiB 
           written: 11.61 TiB Pre-Fail: reallocated sector: 100 threshold: 10 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           ID-3: /dev/sdb type: USB vendor: Seagate model: ST4000VN 000-2AH166 
           drive model: ST4000VN000-2AH166 family: NAS HDD size: 3.64 TiB block size: 
           physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5980 rpm 
           rev: 0125 drive rev: SC60 temp: 31 C 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 3y 137d 3h cycles: 223 read: 16.59 TiB 
           written: 13.85 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 
           threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.63 GiB size: 14.38 GiB (98.24%) used: 4.80 GiB (33.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /mnt/nasd1 raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 1.93 TiB (54.0%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: nasd1 
           uuid: e2fe803a-f255-4d64-9c55-f0c386057c52 
           ID-4: /mnt/nasd2 raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 1.06 TiB (29.7%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: nasd2 
           uuid: d445dfee-de94-4e79-9c3b-54ccd42c89d9 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0567 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/mono-official.list 
           1: deb http: //download.mono-project.com/repo/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/webmin.list 
           1: deb https: //download.webmin.com/download/repository sarge contrib
Processes: CPU top: 5 
           1: cpu: 5.2% command: [/usr/share/webm] pid: 3547 mem: 0.00 MiB (0.0%) 
           2: cpu: 2.1% command: smbd pid: 25289 mem: 13.3 MiB (0.3%) 
           3: cpu: 1.7% command: plex pid: 571 mem: 63.7 MiB (1.6%) 
           4: cpu: 1.2% command: smbd pid: 31967 mem: 21.1 MiB (0.5%) 
           5: cpu: 0.6% command: [usb-storage] pid: 499 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 63.7 MiB (1.6%) command: plex pid: 571 cpu: 1.7% 
           2: mem: 21.1 MiB (0.5%) command: smbd pid: 31967 cpu: 1.2% 
           3: mem: 18.0 MiB (0.4%) command: duplicati.server.exe started by: mono-sgen pid: 22493 
           cpu: 0.0% 
           4: mem: 17.4 MiB (0.4%) command: plex pid: 2141 cpu: 0.1% 
           5: mem: 13.3 MiB (0.3%) command: smbd pid: 25289 cpu: 2.1% 
Info:      Processes: 158 Uptime: 1d 5h 44m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #17429 - Brand: SanDisk SD Ultra (00000)