Benchmark #17480 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
#42 / 1,539
272
#1,088 / 1,539
#97 / 369
1,346
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-13 02:28:56
#17,480
1,385
+39 (+2.82%)
Anonymous
SanDisk Extreme 128GB

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
118.9G
SD
SanDisk
SN128
SDXC
6.00
0x03
SD
8.0
10/2019
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,750 (+250)
750 (+250)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
37.6 MB/s
40.43 MB/s
38.08 MB/s
962 IOPS
2,944 IOPS
3,848 KB/s
11,776 KB/s
9,647 KB/s
2,217 KB/s
7,681 KB/s
3,666 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 video=HDMI-A-2:1440x900M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=8564:7000:u console=ttyS0,115200 console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Device-1: hidpp_battery_0 model: Logitech M705 charge: N/A status: Discharging Memory: RAM: total: 3.89 GiB used: 455.0 MiB (11.4%) gpu: 196.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1920x1080~60Hz, 1440x900~60Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: GN Netcom type: USB driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-1.4.X.X:7 chip ID: 0b0e:2304 Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 119.08 GiB used: 18.16 GiB (15.3%) ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.83 GiB size: 116.92 GiB (98.39%) used: 18.11 GiB (15.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 1-1.4:4 info: Standard Microsystems USB 2.0 Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2512 Hub: 1-1.4.1:6 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0409:005a Device-1: 1-1.4.X.X:7 info: GN Netcom type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 0b0e:2304 Device-2: 1-1.4.X.X:8 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Device-3: 1-1.4.X.X:9 info: HP Business Slim Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 03f0:2b4a Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Genesys Logic Hub ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0612 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.7% command: xorg pid: 550 mem: 49.2 MiB (1.2%) 2: cpu: 1.0% command: lxpanel pid: 678 mem: 30.1 MiB (0.7%) 3: cpu: 0.6% command: [kworker/0:1h-mmc_complete] pid: 74 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: packagekitd pid: 3841 mem: 12.5 MiB (0.3%) 5: cpu: 0.4% command: used started by: mousepad pid: 1221 mem: 50.6 MiB (1.3%) Memory top: 5 1: mem: 50.6 MiB (1.3%) command: used started by: mousepad pid: 1221 cpu: 0.4% 2: mem: 49.2 MiB (1.2%) command: xorg pid: 550 cpu: 1.7% 3: mem: 30.1 MiB (0.7%) command: lxpanel pid: 678 cpu: 1.0% 4: mem: 27.8 MiB (0.7%) command: lxterminal pid: 1269 cpu: 0.2% 5: mem: 25.7 MiB (0.6%) command: pcmanfm pid: 682 cpu: 0.2% Info: Processes: 156 Uptime: 13m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           video=HDMI-A-2:1440x900M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=8564:7000:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Battery:   Device-1: hidpp_battery_0 model: Logitech M705 charge: N/A 
           status: Discharging 
Memory:    RAM: total: 3.89 GiB used: 455.0 MiB (11.4%) gpu: 196.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 1920x1080~60Hz, 1440x900~60Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: GN Netcom type: USB driver: hid-generic,snd-usb-audio,usbhid 
           bus ID: 1-1.4.X.X:7 chip ID: 0b0e:2304 Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 119.08 GiB used: 18.16 GiB (15.3%) 
           ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.83 GiB size: 116.92 GiB (98.39%) used: 18.11 GiB (15.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 1-1.4:4 info: Standard Microsystems USB 2.0 Hub ports: 2 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2512 
           Hub: 1-1.4.1:6 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0409:005a 
           Device-1: 1-1.4.X.X:7 info: GN Netcom type: Audio,HID 
           driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0b0e:2304 Device-2: 1-1.4.X.X:8 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Device-3: 1-1.4.X.X:9 info: HP Business Slim Keyboard type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 03f0:2b4a 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Genesys Logic Hub ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0612 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.7% command: xorg pid: 550 mem: 49.2 MiB (1.2%) 
           2: cpu: 1.0% command: lxpanel pid: 678 mem: 30.1 MiB (0.7%) 
           3: cpu: 0.6% command: [kworker/0:1h-mmc_complete] pid: 74 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.6% command: packagekitd pid: 3841 mem: 12.5 MiB (0.3%) 
           5: cpu: 0.4% command: used started by: mousepad pid: 1221 mem: 50.6 MiB (1.3%) 
           Memory top: 5 
           1: mem: 50.6 MiB (1.3%) command: used started by: mousepad pid: 1221 cpu: 0.4% 
           2: mem: 49.2 MiB (1.2%) command: xorg pid: 550 cpu: 1.7% 
           3: mem: 30.1 MiB (0.7%) command: lxpanel pid: 678 cpu: 1.0% 
           4: mem: 27.8 MiB (0.7%) command: lxterminal pid: 1269 cpu: 0.2% 
           5: mem: 25.7 MiB (0.6%) command: pcmanfm pid: 682 cpu: 0.2% 
Info:      Processes: 156 Uptime: 13m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #17480 - Brand: SanDisk SD Extreme A2 (SN128)