Benchmark #17576 - pibenchmarks.com

Brand: Kingston SSDNow V100
SSD (2.5" SATA)
#575 / 1,679
14
#1,000 / 1,679
#915 / 984
#328 / 370
3,204
	Amazon.com AliExpress Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-04-13 07:42:11
#17,576
2,582
-622 (-24.09%)
Anonymous
Kingston ssdnow100 SSD on Pi4 using Logilink SATA to USB adapter

Storage Details
Kingston SSDNow V100
SSD (2.5" SATA)
64G
SSD
Kingston
SV100S264G
2.5 inch
SATA
2.10
480
2109:6116
0x2109
0x6116
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.1 MB/s
31.74 MB/s
31.58 MB/s
3,231 IOPS
2,010 IOPS
12,925 KB/s
8,043 KB/s
14,053 KB/s
12,120 KB/s
7,851 KB/s
13,061 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 214.1 MiB (5.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 110x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 67.07 GiB used: 1.37 GiB (2.0%) ID-1: /dev/mmcblk0 model: ASTC size: 7.44 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: Mass Storage Device drive model: SV100S264G family: based SSDs size: 59.63 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: D110225a temp: 34 C scheme: MBR SMART: yes state: enabled health: PASSED on: 204d 1h cycles: 1896 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.37 GiB size: 58.43 GiB (98.41%) used: 1.32 GiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 7.19 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:4 info: Super Top M6116 SATA Bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 14cd:6116 Device-2: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.6% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 2: cpu: 1.0% command: bash pid: 4439 mem: 2.78 MiB (0.0%) 3: cpu: 0.8% command: systemd pid: 1 mem: 8.12 MiB (0.2%) 4: cpu: 0.2% command: sudo pid: 4428 mem: 3.18 MiB (0.0%) 5: cpu: 0.1% command: dbus-daemon pid: 339 mem: 3.60 MiB (0.0%) Memory top: 5 1: mem: 8.12 MiB (0.2%) command: systemd pid: 1 cpu: 0.8% 2: mem: 6.83 MiB (0.1%) command: systemd-journald pid: 1526 cpu: 0.0% 3: mem: 6.60 MiB (0.1%) command: systemd pid: 540 cpu: 0.0% 4: mem: 6.08 MiB (0.1%) command: sshd: pid: 534 cpu: 0.0% 5: mem: 5.55 MiB (0.1%) command: systemd-logind pid: 355 cpu: 0.0% Info: Processes: 117 Uptime: 16m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 214.1 MiB (5.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 110x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 67.07 GiB used: 1.37 GiB (2.0%) 
           ID-1: /dev/mmcblk0 model: ASTC size: 7.44 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: Mass Storage Device drive model: SV100S264G 
           family: based SSDs size: 59.63 GiB block size: physical: 512 B logical: 512 B sata: 2.6 
           speed: 3.0 Gb/s rev: D110225a temp: 34 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 204d 1h cycles: 1896 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.37 GiB size: 58.43 GiB (98.41%) used: 1.32 GiB (2.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.19 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:4 info: Super Top M6116 SATA Bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 14cd:6116 
           Device-2: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.6% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.0% command: bash pid: 4439 mem: 2.78 MiB (0.0%) 
           3: cpu: 0.8% command: systemd pid: 1 mem: 8.12 MiB (0.2%) 
           4: cpu: 0.2% command: sudo pid: 4428 mem: 3.18 MiB (0.0%) 
           5: cpu: 0.1% command: dbus-daemon pid: 339 mem: 3.60 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.12 MiB (0.2%) command: systemd pid: 1 cpu: 0.8% 
           2: mem: 6.83 MiB (0.1%) command: systemd-journald pid: 1526 cpu: 0.0% 
           3: mem: 6.60 MiB (0.1%) command: systemd pid: 540 cpu: 0.0% 
           4: mem: 6.08 MiB (0.1%) command: sshd: pid: 534 cpu: 0.0% 
           5: mem: 5.55 MiB (0.1%) command: systemd-logind pid: 355 cpu: 0.0% 
Info:      Processes: 117 Uptime: 16m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #17576 - Brand: Kingston SSDNow V100